I have a music player and because of my fast connection I cannot test if the pre-loader and or bar works. Also no matter what I do I can't get the second track to play.
View 2 RepliesSorry, I'm a newbie with what I'm sure is a deafeningly stupid problem. I'm self-taught, as well, so... there you go. I'm working with buttons that trigger images into a loader. When I test it on my computer it works fine. When I upload the SWF to my site with the code, the buttons appear but they don't load the images. I assumed this was because the images have to load from somewhere, so I uploaded the images to the same folder, but I it still won't work. Now I'm assuming it's an action script issue, but I don't know how to resolve it. My current action script is: on (rollover) {loader.contentPath = "image.jpg";}
View 8 RepliesI'm self-taught, as well, so... there you go. I'm working with buttons that trigger images into a loader. When I test it on my computer it works fine. When I upload the SWF to my site with the code, the buttons appear but they don't load the images. I assumed this was because the images have to load from somewhere, so I uploaded the images to the same folder, but I it still won't work. Now I'm assuming it's an action script issue, but I don't know how to resolve it. My current action script is:
View 6 RepliesI have a music player and because of my fast connection I cannot test if the pre-loader and or bar works.Also no matter what I do I can't get the second track to play. It has the same set of actions pretty much as the first.
View 2 RepliesMy loader component works when I publish to Flash Player 7 but not when I publish to Flash Player 8, why? The publish setting are for ActionScript 2.0 on both.
View 2 Repliesi have a movie that has worked fine in past during Html test but ive been doing some dubugging using the flash test latly and it runs fine here but when i go back and try to test in Html mode no errors come just the movie never fully starts (starts up about as much as if there was an error).
View 5 RepliesI have two scenes in my flash file and in scene 1, first button takes you to frame 2 where movie clip is -works
on (release) {
gotoAndStop("scene1",2);
}
second button takes you to frame 3
but on scene 2 that performs same function as scene 1, the first button
on(press){
gotoAndStop("scene2",2);
}
instead of going to frame 2 goes to frame 3. and the second button goes correctly to frame 3.that happens when i test scene! when i test movie all buttons work properly.
i have a music track when i playback seems to end on frame 1400 but visually looks like it ends on frame 1565 so wanted to test the sound to know when to bring in elements of my animation but i can't find a way to play the music when it is near the end. i keep having to listen from the very start which is a terrible waste of time not to mention making me very sick of the song.
also i noticed when i test my movie the music sounds pretty awful except in normal playback when i guess it is not so heavily compressed. can someone suggest what kind of compression setting i should choose for the mp3 file or is it impossible to change once imported and just testing rather than exporting?
I've made a file in photoshop with layer. I brought it into flash. I created the movie and it plays but when I want to use the "test movie" feat. it does nothing. The graphics come up but no movement. I exported it as an .swf file but still no luck.
View 8 RepliesThe movie works when I test it in the flash IDE, but when I try it from the server it just sits there doing nothing, all the neccessary files are uploaded but I get nothing when I view it.[url]...
View 1 RepliesI'm using a different domain to host the swf file. The different domain is a media server to take the load off our own server and ISP. Actually, we have 2 different media server URLs. One each for development and production. I'm pretty sure the problem is a security issue in the flash. When I take the media server URL out of the file paths everything works. Although I have a crossdomain.xml with the media server urls included, I don't think it's permitting the request.
[Code]...
I have loaded various external swf in my flash site,thew problem is that when i test my site with ctrl+alt+enter they all display properly, when i test the movie form its folder or online some of their functions or aspects bug.
View 1 RepliesSo I made a button and added the following code (url changed for example purposes)
button_1.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler);function mouseDownHandler(event:MouseEvent):void{ navigateToURL(new URLRequest("http://mysite.org.uk/qb.dll"));}
[code]......
Here is my code in its entirety. It won't trace when I Test Movie, but when I debug, it works fine.
import flash.events.*;
function scrollWheelHandler(e:MouseEvent){
trace(e.delta);
}
stage.addEventListener(MouseEvent.MOUSE_WHEEL, scrollWheelHandler);
I hate flash. This is in a new project btw. wtf is going on?
Im using netConnection and netStream in flash 8 to play an external flv. this is my code:
Code:
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
vid.attachVideo(ns);
[code]....
The code, buttons and video object are all in the main timeline (scene 1) of a test fla and it works just fine. But, once I take this code and put it in my main fla which loads external audio, text, and supposedly this video, nothing happens. It doesnt play the flv at all.
I purchased an elastic menu flash component that uses AS3. Unfortunately, I've only just waded into AS2.I'm trying to replace the generic colored background with an image that is masked. Unfortunately, turning the layer into a mask breaks the functionality. The weird thing is that it works fine in Test Mode (Ctrl+Enter) and if published as an EXE. It just doesn't work as an swf.Has anyone run into this weird inconsistency before? Also, what is the best way to get into that component and possibly modify it?
View 1 RepliesI'm using a Loader to load an external image. And when I'm in flash and test the movie it works perfectly, but as soon as I publish it (creating a .html in the same folder, not uploading it online) it says that there's something wrong with the URL - still it works when I test the movie in flash! This is very irritating, because I have no idea what's causing this. What's even more strange is that I have this class inside my movie, that uses the exact same loader method - only it's used inside a class - and it WORKS published.
Here's the code:
Code:
imageLoader = new Loader();
antalBildObjekt += 1;
imageLoader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,
[Code]....
I'm loading an image into a container. The container is simply a loader object with a progress event listener and a complete event listener. It is loaded when a thumb is clicked in the gallery and it displays the image larger.Basically it is possible to interrupt the loading process of the current load stream and load something else by clicking another thumb in the gallery before it's complete.
If you call loader.close() when nothing is loading, Flash will call back an error saying that there is no stream attached to the loader object.Is there a way to test if the loader object is presently loading, and if so to close it?
I have created a pre-loader that creates a movie clip holder then loads an external swf into the created movie clip holder. The pre-loader downloads the external swf but then the downloaded swf re-loads on entry into it's first frame.
View 4 Repliesi am trying to load the html code of a page in to flash. It is working and running fine when i compile in flash but when i run it of my web server it wont load. the code that loads it is:textLoader.load(textReq);textLoader.addEventListener(Event.COMPLETE, textLoadComplete);So once it has loaded the url in to textLoader it calls the function textLoadComplete. Like i say it works fine in flash but not on the server. I was wondering if it might be a security problem? i have used this at the start of the class:
View 2 RepliesI have created a moviecliploader that loads an external SWF and has player controls. I have a slider that moves with the movie, which works perfectly with cc_1.swf, but will not move with p_2.swf. The code below shows how the movie is loaded and how I update the x coordinate of the slider. Also, the attached zip file contains the fla and both swf movies.
Code:
//Working: cc_1.swf
//Not Working: p_2.swf
//Load Movie
var myMCL = new MovieClipLoader();
myMCL.loadClip("cc_1.swf", _root.container);
[Code] .....
I'm a relatively experienced Web developer, but this is my first foray into playing (streaming) music. All of the music players I've run across either load MP3s from an XML file (which exposes the MP3s' URLs) or have code embedded in them that loads URL-accessible audio files. Due to copyright issues, this is not acceptable for my client's content.So, I'm looking for one of two things...(1) A music player that already exists that either plays music embedded into the FLA itself -or- can read the files from a non-public area on the file system, or(2) Sample code that generally approximates what I'm describing, from which I'll try to construct my own player.
View 3 RepliesI'm doing a site in JOOMLA and i want to add music to the site. For example if the user stop the music i want the music player to be able to stop the music and not reload the song if the user go to the next page. If the user dont stop the player, i want the song to keep playing if user go to the next page.in which way i can do this? i heard about adding some kind of cookie script to the flash player.
View 1 RepliesI made a very simple loader, it's only a textbox with a percent loaded displayed.
It works perfectly when I use Test Movie in the Flash IDE but when I upload the .swf to my webserver, I get a blank grey box until the entire game is loaded, then it starts the game.
Is there any common mistakes one could make that would lead to this behaviour?
-- Detailed information -- Flash 8 game has 2 scenes. Loader, and MainGame Loader scene has the following code in frame 1:
Code:
stop();
onEnterFrame = function()
{
[Code].....
frame 2 has all my dynamically loaded movieclips placed on the stage (since I can't use 'export to frame 1' or that breaks the loader) frame 3 has a bunch of mp3's the game uses (same reason)
MainGame Scene has one frame that has actionscript code that does everything by code alone, loading movieclips and sounds dynamically.
It's that simple, and the loading works perfectly with various bandwidth settings using Test Movie, but once loaded from a website, the loader fails to appear at all, instead you are greeted to a grey box until the game is fully downloaded.
For a large project I have the following setup:
a content editor made with Flex SDK 3.5
a content viewer made with Flex SDK 4.1
Both need to work with dynamically loaded fonts as the user can use the fonts he wants.
So we used this approach:
convert the font files with Flash Professional to SWF-files (Creating a Font SWF)
editor: load the fonts with Loader (Loading a SWF font) the fonts can then be perfectly used within the application to generate htmlText viewer: the same approach to load the fonts + register them with Font.registerFont (Flex 4 Embed font from swf)
Now the problems: although the loaded fonts are listed when you trace Font.enumerateFonts(false), they are not used in the textarea. There the text is shown with the default font.
Maybe the problem is the fonts are loaded as embedAsCFF for the Text Layout Framework, and that way are not usable in an mx.controls.TextArea? But as I can not change that to a spark TextArea for multiple reasons, I need a solution to use the loaded fonts in that mx.controls.TextArea.
I want to add a really simple music player to my flash website.Basically all i want is one of my tracks to start when the page loads.Then a simple 'sound on/off'.
View 6 RepliesI want to build a custom MP3 player for my website.even explain just to get me started?
View 3 RepliesI am creating a little JavaScript music player that sits on the bottom of the page, a lot like streampad. But streampad uses a flash progress bar for the song and JavaScript for everything else and I am having a hard time finding anyone who does this with JavaScript alone.
View 4 RepliesI am new to AS3, and I am trying to make an XML music player. For reasons unknown, the music player that I have coded (GUI was made an placed on the stage, so coding for those are not included.) will not display text or play the music. The code I have so far is:
var my_songs:XMLList;
var my_total:Number;
var my_sound:Sound;[code]....
I am trying to get a music player that uses XML to work but have not had any luck.
Here is my actionscript:
ActionScript Code:
var my_songs:XMLList;
var my_total:Number;
[code].....
I have also tried to load everything to my server but it still doesn't work.