What I have is main movie that loads child movie via
moduleLoader = new MovieClipLoader();
path = childMOvie.swf?param=1;
moduleLoader.loadClip(path,childModule);
I need to pick up the param value from query string sent by parent movie in child movie, I tried _level0.param does not work, _root.params? same thing ?I m very new to actionscript,
I need to grab values from the querystring and inject them into a getURL(""); snippet that's in the on (release) {} for a button.So if the URL that contains the embedded swf is
[URL]
I'd like to get that otherdomain.com and inject it. Something like
var returnUrl = "";
// do magic querystring getting
getURL(returnUrl);
*Edit: I need to snag the querystring because I don't have access to the embed code. It's being rendered by a third party (Articulate) and loaded into a frame. I do have access to the code that renders the frame html, which is why I figured query string would be the best route, and one button that's used in the presentation.
Note, I live in C# land, not ActionScript land so I most likely butchered the syntax. I just need to get this button working as a one off and I'll probably never deal with it again.BTW, I've seen the abdulqabiz QueryString object that's floating around out there but it kind of seems like overkill, like there should be something baked into the framework for this. I also lack the knowledge of how to incorporate this into my little button on (release) {} event
This is driving me nuts... Based on my research I should be able to pass QueryString parameters directly to a swf object like so: [URL] In the mxml oncreationcomplete method I have tried the following:
[Code]....
Php dosen't pick thje FIN values to get the data from the mysql db.[code]
View 3 RepliesI am a bit of a noob, and I'm having a problem. I had posted about this before but I think I was explaining what I need to do in way to much of a complicated manner so I'm going to try and simplify this a bit. I have 5 swf's.
- main.swf (parent)
- child01.swf
- child02.swf
[code]......
I have a movieclip, with the instance name SizingBox, on the main timeline. Within that mc, I have a Slider component, with the instance name Sizer. I want to declare an action listener on the main timeline which will listen to changes for Sizer and do something based on the current value of the slider.In AS2 this was really easy, but I cannot seem to figure it out for AS3.
Code:
var X = SizingBox.Sizer.value;
this code gives an error.
[code]......
If my holder's alpha equals 0 can its child's alpha be effectively > 0 ? In my case I have holders (custom clases) with many children, some of which are holders them selves (with their own children and holders and so on).
I would like to:
-pick out a single holder from the 'tree'
-have all of the 1st level children of that are NOT holders themselves have an alpha of 1.
I have an Movie Clip in Flash that have subobject of button type which has subobject of input text and movie clips. Right after creation core Moveclip all subobject are set to null, when I expect them to be valid objects.
[Code]...
MC_Core_design was created in Flash and exported to Actionscript. I've done this for button_1 class aswell. The code was written using Flex. When I comment out both lines that result in error I get correct view of the core Movie clip with all subobject. How can I set subobject properties right after object creation?
I expected the trace command at the end of this code to return 0, but it returns 100. Does anyone know why mc's y coordinate value is not updated after adding it a child?[code]...
View 9 RepliesI Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
View 6 RepliesCan I set variable from QueryString .
View 3 RepliesI want to get url querystring value in the .swf file. Suppose when mypage.html?itemname=xyz is requested, flash file should automatically catch "xyz" and display it.
View 5 RepliesI have created a loading video that plays on top of the main FLV until it is done buffering and then disappears. This should be straight forward, however, it does not work for me.[code]...
View 17 RepliesI'm in a big distress, I'm using AS2 with CS3 (Flash 9.0 on OSX Snow Leopard) and I can't get the querystring. I don't understand it has always worked before with my previous version of Flash. I'm using this AS code: t_txt.text += _root.age; I have a dynamic text linked to t_txt. For the HTML I simply published using Flash, then I changed in the html file like this:
<param name="movie" value="age.swf?age=56" />
And
<embed src="age.swf?age=56" quality="high" etc >
When I set to use AS1 it just works fine. But I can't use AS1 all my projects are with AS2. So what's wrong?
The FLV I need to load is at a remote URL, but the server requires a ticket appended to the end in order to send the file over my way.so http[url]...........But if I try and send that into the source I get "No root node found; if url is for an flv it must have .flv extension and take no parameters"
View 5 RepliesHow can I get querystring values from a bowser sting into my flash movie
For example the link is [URL]
The html page loads a flash movie, and I would like the flash movie to be able to access the variable name=John
Currently in Flash I am trying to pull in a value based on the querystring. Example..
[Code]...
This works in the main flash actionscript, but I need the querystring in a class constructor that I created. How can I pass the querystring to a separated out actionscript file?
I'm unclear on the proper format for passing a QueryString Value using FlashVars, this is what I'm trying <param name="FlashVars" value="part=<%= Request.QueryString["part"] %>" /> but this causes a parse/encode error and the swf doesnt load, same if I use single quotes ie <param name="FlashVars" value="part=<%= Request.QueryString['part'] %>" />
I've been working with this tutorial:[URL] Using AS1, I've been able to extract a variable from a SWF, e.g. the SWF has a querystring associated with it, in the HTML of the web page on which it is embedded:
Code:
<param name="movie" value="loaderInfoExample.swf?userName=TestUser" />
<embed src="loaderInfoExample.swf?userName=TestUser" ....
It's easy to get the variable into AS1 - it's just there, without doing anything. I've tried to do the same in AS2, but I can't get it to work, using Permadi's page. All I want to do is to get the value of the 'userName' var from the SWF Querystring, into a variable in the SWF. The example on the Permadi page didn't work - I may have been doing something very wrong of course.
I have a client that needs a flash intro that will be accessed through a link in an email campaign. When the user clicks the link in their email, it sends them to this flash intro, but also sends a querystring with it. I need the flash file (v5) to read the querystring, use it during the movie, and then pass it on to an asp page when the intro is done playing.What is the best method to do this?
View 9 RepliesI have this old project where I have to pass a querystring from one flash to another...
mc.onPress = function() {
whatURL = "index.html?id="+this.id+"&num="+this.num
getURL(whatURL, "_blank", "GET");
}
But when pressed, i get a querystring longer than my arm : [URL] and a whole lot of other variables and functions... i end up getting a Request-URI too large.How come I pass all these different variables to the query string when I just ask for 2?
I am having a flash application where I want to send parameters to it via the javascript from a defaul.aspx page. I have a parameter called Id where it can accept alphanumeric values. The query string in the url works fine if I enter just numbers for the Id, and takes me to the specific page related to that id , but if I enter a combination of numbers and characters like 001A , it does not work.
This is the code I used
<script type="text/javascript">
function getQueryVariable(variable) {
var query = window.location.search.substring(1);
var vars = query.split("&");
for (var i=0; i<vars.length; i++) {
[Code] .....
And then passed the flashvars into swfobject.embedSWF. I also don't want to change anything in my mxml files in flash side.
I have a label I am referencing form a movie clip inside the movie clip which contains the "label_2." Here is the code I used: MovieClip(parent.parent).gotoAndPlay("return_2"); Now I need to reference a instance name of a movie clip in side the same scene.
View 10 RepliesI have an external swf (sub.swf) that loads into my main swf. The external swf has buttons of its own...that I would like to use to load additional external swf's in its place. I click on the buttons and nothings happens.
My current code is as follows:
All of the following code is in my main.swf
================================
//Location where the external SWFs will load
var Xpos:Number=18;
var Ypos:Number=10;
[Code]...
External swf has no code except for a stop action.
I pieced this current code based on various articles I've found on the net.
I am loading external swf's into a main load.swf, using a Moviecliploader object. What I basically want to do is that, after an external movie, say home.swf, loads another external swf, say about.swf, home.swf should be unloaded.
home.swf is loading about.swf into the _root.mc_holder, which is placed inside load.swf. I want all external files to be placed within this holder. Now this is working with some files, but not with others. My standard code within all files is this:
//code within home.swf to load about.swf
var loader:MovieClipLoader = new MovieClipLoader();var ldrlistener = new Object();loader.addListener(ldrlistener);ldrlistener.onLoadStart =
[Code]......
I'm working on a Flash MX application which involves a Parent movie and a Child movie.
I've loaded the Child movie into the Parent movie using LoadMovie. The instance name of the Child movie is Child1.
In the Child movie I have a user-defined function called getChildXML (we don't need to get into more details about the function).
The point here is that I want to call the getChildXML function from the Parent movie. I've tried something like Child1.getChildXML(); but with no luck.
Multiple value passing Querystring using flash array method into asp file ?
trying to work with the code but not passing any value ?
Code:
for (var i = 0; i<newArray.length; i++) {
var num = i+1;
pas["n"+num+"="] = newArray[i].name;
[Code].....
how to pass multiple querystring to html or asp ?
I have a flash slideshow on my homepage which displays news by a xml file underand I am using slideshowpro for it. That slideshow xml file path must be set within adobe flash program.What I need in here, when a language is changed from language selector at header, News must be set as selected language respectively. My question is how to get querystring value and pass it to adobe flash so it is changed and set according to the selected language.
var flashvars = { var params = { bgcolor: "#000000", allowfullscreen: "true", wmode:"transparent", var attributes = {} swfobject.embedSWF("swf/slideshowpro.swf", "flashcontent", "550", "400", "10.0.0", false,
[code]......
Can someone point me to a simple example of posting to a user's facebook pages using a query string? ie I'm not using facebook connect.
View 1 RepliesI need to call a REST web service that provides an XML feed of weather conditions. I have 13 cities for which conditions are needed, and only 3 nodes for each city are required (vs. the entire feed). My very basic first attempt is as follows:
[Code]...
First, how do I parse the 3 nodes, and ? Next, is there a way to pass a different querystring argument for each of the 13 cities? Finally, how would I add these values to an FLV that's been imported and placed on stage? The FLV displays a geographical area and pans from east to west plotting cities as it goes. At each city plot, the 3 node values need to be "superimposed" onto the FLV.
