the thumbnails in Silver Pistol website [URL]..I noticed that some of them align to the center (x,y) of the cursor while others are dragable thumbs. I was trying to replicate that stuff using some basic drag stuff but I miserably failed.
View 1 RepliesDo you know any tutorial similar to this one [URL]...y=ActionScript) that shows how to make a bouncing image that resizes during bouncing?
View 3 RepliesI have a movieclip that I want to be resized when a button is clicked. I want the animation to be smooth as if it had weight though. I read the tutorial on this but I need something slightly different, I would rather it where I can just refer to a function that is set in another movieclip. That way I could easily refer to it again and just set the height, width, and if possible, x, and y.
And my second question, is how to keep the border of my movieclip that is going to be resized the same thickness. I want the inside to be resized but the sides to stay the same width but move to stay on the edge.
Haven't been here for a while and I'm really rusty using Flash. I looking for a tutorial or some information on how to scroll thumbnails by scrolling the mouse left or right over the thumbnails.
View 3 RepliesI used the tutorial "Adding Thumbnails" to build a fotoshow. Adding another xml-file I have the problem,that I cannot reload(?) the thumbnails correctly.[code]Then I do not see any thumbnails,if(!) the new thumbnail list contains fewer elements than the old one and if the old thumbnail list was scrolled over the hit_right field before.It is seemingly necessary to reset the internal state of the movieclip. But how can I accompish that?
View 1 RepliesI've got a website with three links to three different thumbnail galleries. When I click the link to a gallery that has a lesser number of thumbnails, it fills the difference in numbers in with thumbnails from the previous gallery.
View 1 Repliesthen you will see that when you hit the walls or boundrys you "bounce" off them. I have accomplished stopping movement when hittest occurs but how shall I get the car to "bounce" off the walls. It would be great if you could supply the full code as I am not a great coder.
View 1 RepliesI am trying to make an effect on a button that when I mouse over it, it keeps jumping up and down smoothly and when mouse out it stops. I tried this but the result was really bad:
[CODE].....
i have just came across the tutorial with physics/bouncing ball - so far i have encountered no problems in understanding it, but just a question:how do i stop the ball bouncing? do i have to equal it to a certain value or just drop in another if/else statement, because now the ball seems to bounce forever, since it gets every time multpilicated by a negative number.
View 2 RepliesI've got this ball that bounces around the screen. There are a bunch more that are made with the duplicate movie clip command. I want them to bounce off eachother, as well as the walls. The problem is, I cant just put the code on the original ball because then balls want to bounce off themselves which creates problems. So my question is, is there some kind of loop I can use to make it so each duplicate ball will bounce off the others but not itself?
View 5 RepliesI followed the tutorial about gravity, with bouncing, and I wanted to figure out how to test when it has stopped bouncing.
What I am trying to get at is say I had the objet bounce from a point, then when it has stopped bouncing, move left or right. Think of a person dropped from a plane with a parachute. He has to wait until he is firmly on the ground before he can start moving...thats what I want to do.
im was wondering if anyone knows the script for a ball bouncing off a paddle. I want the ball to bounce off the paddle in different directions depending on:
1) which side of the paddle it hits
2) which direction it came from
Ive only got this so far : script for the paddle
onClipEvent(enterFrame)
{
if (this.hitTest(_parent.ball)) //if this movieclip hits the movieclip 'ball'
tellTarget(_root.ball) //tell the ball to:[code]....
I've been trying to recreate the yugop examplewhere the balls seem to bounce off each otherbut the difference is, they can also rest on top of each other.click to add more balls.
Code:
main.fla
var ballcount:Number=1;
[code]....
I have an image and I want it to have a reflection and to apply an effect onMouseOver so that image bounces (like a rubber ball) until it stops.I found this example (http:url]....)that does exactly what i want (except I want it to bounce just one time per mouse over), but this is for Flex and I cant manage to translate it to Flash.
View 2 RepliesI have created a flash AS3 file with two movieclips. One is a ball (ball_mc) and a wall (wall_mc). The ball bounces around off the outer walls of the stage, in horizontal lines.
The ball also changes direction if it bounces off the wall. However its not bouncing off the wall in the right direction?
Code:
var dx:Number=3; //the amount the ball will move horizontally each frame
var dy:Number=5; //the amount the ball will move vertically each frame
this.addEventListener(Event.ENTER_FRAME,moveBall); // call the function moveBall every frame
[Code].....
I followed the tutorial about gravity, with bouncing, and I wanted to figure out how to test when it has stopped bouncing.
What I am trying to get at is say I had the objet bounce from a point, then when it has stopped bouncing, move left or right. Think of a person dropped from a plane with a parachute. He has to wait until he is firmly on the ground before he can start moving...thats what I want to do.
below is the code I am useing I have created a simple frame with 2 layers one named body and one named Code in the code frame I have
[Code]...
In the body I have 4 walls all named top bottom right and left they are movies and they are named in there instance the same I have a circle I named ball and made it into a movie and named it ball yet when I run the flash file the ball flys off the page and doesnt bounce inside the boxes?
I am currently making a brick breaker game, so I want to make the ball bounce from the paddle. My paddle's name is pwn and the ball's name is ball.
My code for ball is currently:
onClipEvent (enterFrame) {
this._y += 5;
this._x += 4;
}
[Code]....
I just want the ball to bounce somewhere else other than stopping the ball at the place. I already made sure the paddle can move and the boundaries block the paddle from leaving the stage. So can someone give me the codes (please simple for me to copy-paste) for having me to bounce the ball some opposite direction or whatsoever. Like once the ball touches the paddle, it reflects somewhere else at the same speed and a different direction without any errors.
What I need is a ball to be bouncing. It needs it needs to slow down when it reaches its peak and increase speed as it falls. It needs to bounce forever at the same height. And last ... I need a button to make the ball look like its moving in slow motion (while still bouncing at the same height).
This is the closest I have come to getting it right. if you click the button when the ball is at its peak it works. but if you click any other time the ball will fly up to far (it needs to bounce the same height when in slow motion and in regular motion).
movieclips - "ball", "ground"
button - "btn"
[Code].....
I am making a game where you have to collect tangerines which randomly spawn every second and bounce around randomly but I need to make them spawn and bounce randomly.
View 2 RepliesWhen I bounce a ball off the walls of the stage using the following technique.[code]Not only is the ball jumpy and skippy. but after so often it begins to go either in a vertal motion y = 5; x = 0; or a horzontal motion x = 5, y = 0. And stays that way. Why is it that the first method works fine but the other method works terrible. Could it be because the Math.cos and Math.sin returns very large decimals.I really prefer to use the second method.
View 5 RepliesI have a ball bouncing on a paddle. I want the "stage" to move vertically in order to always keep the ball centered.
View 2 RepliesI'm looking at creating a game which involves many bouncing balls on the screen, and the user can sortof select one of those balls and take it out... The balls should be able to bounce of eachother and the walls. I've tried implementing this from scratch, following the tutorials at [URL] - but it's not quite working for me, and if I need the game to become more complicated- probably best to use an existing engine. So is there an existing engine that will work very fast and well for this sort of thing? At a glance- it didn't seem like box2d or flixel would work for this... but what do you say?
View 2 RepliesI 'm looking for something like this but for free [URL]
View 0 RepliesIm having multiple movieclips moving randomly and bouncing of the stage border, however, my problem is, first of all that the movieclips get half their body into the border on the right and top, and on the left and bottom the movieclip stops before the border. My other problem is that the movieclips have a tendency to get stuck in the border and just bounce rapidly along the border side. Im gonna asume that i only need to show you the code which the bounce back at border is created not to make the code to long (so hopefully im right):
[Code]...
I have a number of random balls bouncing around the stage.What I am having difficulty with is making them bounce off each other when they run into each other.The balls bounce off the walls just fine, but I can't seem to figure out the hitTest thing.
View 3 RepliesI have recently started Learning Actionscript 3.0 out of my own interest. I was trying on making a ball bounce off the edges of the stage using the Actionscript 3.0. But the code not working. The Ball happens to move on X and Y, till it hits the end of the stage, and then it just does not reverse its direction to give the effect of bounce, it gets stuck to the X axis and moves out of the stage. I tried to make changes, but failed.
Code:
function bounceBall(evt:Event):void {
var vx:Number=Math.random()*10+5;
var vy:Number=Math.random()*10+5;
var radius:Number=mcBall.height/2;
var top:Number=0;
[Code] .....
I'm looking for a bouncing ball script, but one which is easily editable. I'm not a coder of any sort, but I can work out small sections of script.Basically, I want somewhere to set the number of balls, somewhere to set the speed and somewhere to set rotation. The objects I will be using will not be completely spherical, and need to look natural as they bounce off each other and off the walls, rotating as they do so.So, to clarify, I need an actionscript file that:
* Allows me to create objects that will bounce off all four walls. Gravity isn't a requirement.
* Allows me to create objects that have collision detection, allowing them to bounce off each other and rotate as they do so.
* Allows me to have the objects bouncing as soon as the flash file plays. In other words, clicking and dragging is not a requirement.
* Allows me to create x amount of objects at a randomised size.
* Allows me to specify the speed of the objects.
* Allows me to specify the rotation speed of the objects.
I am building bouncing application, here is the document class:
Code:
package{
import flash.display.*;
import flash.events.*;
public class BasketBall extends Sprite{
private var IsMouseDown:Boolean = false;
[Code] .....
Now the problem is that the "ball" clip some times does not bounce properly and it is also not getting right angle.
trying to basically using AS3 to make a ball bounce around the stage but never lose motion and have the chance to speed it up or slow it down through code.
View 3 Replies