ActionScript 3.0 :: Movieclips Bouncing Of Stage Border
Sep 16, 2010
Im having multiple movieclips moving randomly and bouncing of the stage border, however, my problem is, first of all that the movieclips get half their body into the border on the right and top, and on the left and bottom the movieclip stops before the border. My other problem is that the movieclips have a tendency to get stuck in the border and just bounce rapidly along the border side. Im gonna asume that i only need to show you the code which the bounce back at border is created not to make the code to long (so hopefully im right):
[Code]...
View 1 Replies
Similar Posts:
Nov 23, 2003
I have 2 Movieclips, box and car, and I want them to bounce backwards 10 pixels when they hit. I have a little understanding of hit test but do not know how to make something happen when hit test occurs. And it would be great if you could make the movieclips "move" back 10 pixels instead of automatically jumping 10 pixels back.
View 1 Replies
Jul 10, 2008
Do you know any tutorial similar to this one [URL]...y=ActionScript) that shows how to make a bouncing image that resizes during bouncing?
View 3 Replies
Jan 5, 2010
When I bounce a ball off the walls of the stage using the following technique.[code]Not only is the ball jumpy and skippy. but after so often it begins to go either in a vertal motion y = 5; x = 0; or a horzontal motion x = 5, y = 0. And stays that way. Why is it that the first method works fine but the other method works terrible. Could it be because the Math.cos and Math.sin returns very large decimals.I really prefer to use the second method.
View 5 Replies
Mar 8, 2011
I have a ball bouncing on a paddle. I want the "stage" to move vertically in order to always keep the ball centered.
View 2 Replies
Jun 22, 2009
I have recently started Learning Actionscript 3.0 out of my own interest. I was trying on making a ball bounce off the edges of the stage using the Actionscript 3.0. But the code not working. The Ball happens to move on X and Y, till it hits the end of the stage, and then it just does not reverse its direction to give the effect of bounce, it gets stuck to the X axis and moves out of the stage. I tried to make changes, but failed.
Code:
function bounceBall(evt:Event):void {
var vx:Number=Math.random()*10+5;
var vy:Number=Math.random()*10+5;
var radius:Number=mcBall.height/2;
var top:Number=0;
[Code] .....
View 2 Replies
Nov 5, 2009
I have added full screen code on my movie so that the user can extend the size of the movie. eg If the user expands the browser window to 1200 X 900, then my movie will become 1200 X 900 without the movie deforming.
Code:
Stage.scaleMode = "noScale";
Stage.align = "TL";
[code]....
View 3 Replies
Jun 4, 2009
is it possible with AS3 to see the list of the movieclips that are on stage?
View 13 Replies
Dec 6, 2009
How do you put a neat little border around the stage so you can see precisely where the stage is at when working with a large graphic?
View 2 Replies
Nov 21, 2010
add a 1 pixel border around the entire stage so it appears in swf?
View 3 Replies
Jan 8, 2012
I am kind of new to the whole flash sceen and am getting a little bit frustrated with the snapping (I am used to Photoshop Snapping). I have a bunch of objects the exact same size as the stage and I would like to snap them to the stage (I am making a slideshow-rotating image). I always find myself having to zoom in extreamly to make sure the edge of my image is lined up with the edge of the stage... is there a way to snap my images to the stage.
View 1 Replies
Sep 9, 2011
Looking for a way to stop all movieclips both are the stage and that are children of the ones on the stage.
I toyed with looping thru stage's children so I can first target clips on the stage. But I am getting error.
for (var i:int = 0; i < this.numChildren; i++) if (this.getChildAt(i) is MovieClip)
{
this.getChildAt(i).stop
}}
View 5 Replies
Dec 23, 2008
I am in the making of a isometric level editor, and I have about 15 movie clips with more to come. I want to let people change the color of tiles to what they want from a list of colors, so how can I let them change the color of a tile dinamicly with actionscript so that it changes a tile's color while preserving changes of "shadows"? I mean I have let's say a cube and to make it look 3D I need to change each face to make a feeling of 3D and not a flat one.
View 1 Replies
Apr 12, 2011
I'm having a hard time trying to accomplish this. I want to have several different movieclips on the stage, either added there when making the fla or dinamically created through AS3 and I want them to be controlled by a certain function. I read the blue circle tutorials on this site but I'm not sure I got it right I have done something similar to this (not posting the real thing because it's not in English and too long):
public class blabla
private var variable1
private var variable2
[Code].....
I'm not sure what to do to have the function work with different movieclips using different arguments. I could change this for an instance name, for example, but then I would have to do a function for each mc and that wouldn't make any sense. It would be cool if I could give the instance name as an argument but I don't think that's possible.
View 2 Replies
Feb 3, 2009
I have one MC on stage with instance name "box". That MC duplicates by using this script:
Code:
duplicateMovieClip (box, newname="box2", this.getNextHighestDepth());
box2._x = xPoz;
box2._y = yPoz;
So the new MC is now called "box2".
Inside original MC "box", I have one button. After click on that button, I need to know on which MC I clicked. box, or box2. I tried to use:
Code:
trace (this._name);
But, that get me only instance name of the button.
View 4 Replies
Aug 9, 2009
i made this code that duplicates a movie clip randomly in the stage but i want it to be duplicated out of the stage.
View 1 Replies
Aug 17, 2009
I wasn't sure if I were to put this in the Actionscript forum or in here, so I put it in here. I'm making a small test for a game so I made two attached movieclips to the stage. I got them to move at each other, but when they hit, it doesn't detect it. Is there anyway i can make them hit eachother? Heres the code
[Code]...
View 3 Replies
Dec 13, 2008
I have 2 movieclips in the library exported as class d1 and d2 , I want to add them to the stage using something like the code below.
this doesn't work but you can understand what i want to do. what is the correct syntax ?
View 3 Replies
Jun 16, 2009
I've got a long list of similar movieclips I'm adding to the stage. There's 9 in total and the code looks like this...
stage.addChild(zone0_mc);
zone0_mc.x=267.6;
zone0_mc.y=120.5;
[code].....
View 3 Replies
Sep 30, 2009
I have a file where movie clips are added to the stage at random time intervals and locations. How do I get pieces of code to effect all the created movie clips? At the moment I'm using attachMovie to add the movie clips to the stage. Once a movie clip is added I want to add three actions to it: the first makes it so that clicking on the movie clip will remove it from the stage, the second makes the movie clip move in a random direction across the stage, and the third makes it so that when the movie clip reaches the end of it's own timeline it performs an action then removes itself.
View 8 Replies
Mar 20, 2011
for (var i = 0; i<= 3;i++){var pic_mc = new MovieClip(); pic_mc = MovieClip(getChildByName("mc" + i));trace(pic_mc); pic_mc.alpha = 0; pic_mc.x = 0; pic_mc.y = 0; pic_mc.addEventListener(Event.ENTER_FRAME, animate);
[code].....
View 5 Replies
Nov 21, 2010
I have some movieclips on my stage that are there via timeline. I also add movieclips on stage using addChild.
What is the best way of changing the order of the movieclips because they overlap sometimes? eg.
mc_a is on the stage already
mc_b is called on stage using addChild
Can I change the order of mc_a using script even though it was already on stage?
Can I remove mc_a off stage using script?
How do add mc_b under mc_a so that mc_b does not overlap mc_a?
View 2 Replies
Jan 30, 2012
I am creating a miner game (where there are pieces of gold and you have to catch them with hook).I modified the Main class to take all children of MovieClip(root) that has name "Gold" and them put them in an Array(boulders[]) where later check collision (I design and put on stage several "Gold" MovieClips for every level). When the player collects all gold (when the boulders array.length <= 0) then goToAndStop(nextLevel), where again it takes the gold MovieClips from the stage and if it's name is == "Gold" then put's it in the boulder[].
What happened: On the first level(frame 2 cause frame 1 is the preloader) everything is good - I have 2 gold MovieClips on the stage(in design mode) and all 2 gold are put in the array and displayed.
On the second level I have 4 gold and only 2 of them are put in the array and displayed.
On the third level I have 7 golds designed on stage, but only 3 are displayed and put in the boulder array.
It's almost the previous count of the gold(on the previous frame) are subtracted from the count of the next frame gold movieclips.I am placing the Main.as code:
public function createLevel(){
nextLevel = this.currentFrame + 1;
for (var i:uint = 0; i < MovieClip(root).numChildren; i++){[code]....
View 1 Replies
Nov 16, 2009
It this part in qeustion "if(ball._x + ball.width / 2 > 400){" should the trace function be recognised when the half of th ball moves over the 400 mark.
Its doesnt though and i dont know why?
ball.dx = 10;
ball.dy = 10;
ball.onEnterFrame = function(){
[Code]....
View 4 Replies
Apr 19, 2010
before it was just
somemc._x = someotherMc._x
but as3 doesn't know how to identify someotherMC
[code].....
View 5 Replies
Sep 20, 2010
Im trying to dynamically add several of the same movieclips to the stage. This movie clip contains a textbox. I have tried the following:-[code]I have my movieclip exported fror actionscript with the identifier as (textbox). This code does add a textbox to the stage however it only adds the second one which says "goodbye" but not the first one which should say "hello"? I thought the loop should go round twice and add a 'newText1' and a 'newText2'??
View 3 Replies
Jul 20, 2011
i want to loop through movieClips like in AS2; i have some movieClips and Components on the stage.i want loop through them to check their properties. i had used [ getChildName ] method to get the movie clips ,but i can't access their properities.
here's my code
Quote:
for(var i=1;i<=4;i++) {
var tempisplayObject = getChildByName("my_mc"+i);
trace(temp.currentLabel);
}
when i run this code i am getting error like this
Scene 1, Layer 'Layer 2', Frame 1, Line 251119: Access of possibly undefined property currentLabel through a reference with static type flash.displayisplayObject. i am getting the same error also when i access to components.
View 3 Replies
Jun 23, 2009
I want to pull in an xml list containing thumbnail image src, image label, and video clip info, into a format on the stage. The thumbnail images should be pushed into 5 instances of the same movieclip on the stage. Eventually, I want to load the image label into a text box (should be easy), and then the videoclip to be played via click onto thumbnail (will attempt that later)
Below is my code:
Code: Select allimport fl.transitions.Tween;
import fl.transitions.easing.*;
[code]......
View 3 Replies
Jul 21, 2009
How Do I Count how many Movieclips on Stage? I want to make sure the code is acting as I want and creating the correct amount of MovieClips (and deleting them after).
View 4 Replies
Aug 11, 2009
I have 4 MovieClips and they are in Array but i need to randomly fade-in them on stage within the boundaryes of stage. How to do that? I know i have to use Math.random
View 8 Replies
