I must say that learning by "trial and error" gives one an opportunity to see quite a lot of inventive error messages Here's my latest nut - needing a crack:In my animation I have a button utilizing the tellTarget command to activate another movieclip (which contains an effect for the button).The button and the "effect movieclip" (each on their own layer) are inside a movieclip called MC_mm_buttons which again is inside the main .swfWhen I test my .swf the output window gives me this error message:Target not found: Target="/test" Base="_level0.mc_mm_buttons"Trying to solve this problem, I isolated the button and its effect movieclip simply by making them again, from scratch, in a new document.. everything works fine, so I've got the tellTarget command and the interaction between the button and its movieclip nailed down.
Now, I'm pretty sure that it has something to do with me needing to specify that the effect movieclip (in my real .swf) is inside another movie clip and on a different layer.. still, I don't have a clue how I'm supposed to tell flash that in my script...So, to sum it all up:My button and movieclip are in the same movieclip but each on a layer of their own, the movieclip has an instance name of "test" and the button has a script like this:
on (rollOver) {
tellTarget ("/test") {
gotoAndPlay ("in")
i don't know why this isn't working.i got a button. and when it's pressed, i need it to go and play a frame in a movie clip. i'll test it and then when i click on it, i get this:
Target not found: Target="whoweare" Base="_level0.instance20.instance48.instance49"
this is the code that i am using:
on (press) { tellTarget ("whoweare") { gotoAndPlay (51); } }
In my animation I have a button utilizing the tellTarget command to activate another movieclip (which contains an effect for the button). The button and the "effect movieclip" (each on their own layer) are inside a movieclip called MC_mm_buttons which again is inside the main .swf
When I test my .swf the output window gives me this error message: Target not found: Target="/test" Base="_level0.mc_mm_buttons"
I isolated the button and its effect movieclip simply by making them again, from scratch, in a new document.. everything works fine, so I've got the tellTarget command and the interaction between the button and its movieclip nailed down. Now, I'm pretty sure that it has something to do with me needing to specify that the effect movieclip (in my real .swf) is inside another movie clip and on a different layer.. My button and movieclip are in the same movieclip but each on a layer of their own, the movieclip has an instance name of "test" and the button has a script like this:
on (rollOver) { tellTarget ("/test") { gotoAndPlay ("in") }} on (rollOut) { tellTarget ("/test") { gotoAndPlay ("out") }}
When I roll the mouse over the button, the output window gives me this: Target not found: Target="/test" Base="_level0.mc_mm_buttons"
I have been following the Flash CS3 Portfolio website tutorial on [url].... exactly and haven't run into any problems until this one.I am getting this error?
I'm working on a Flex application that processes and displays small amounts of HTML, sometimes including images. I'm getting the HTML out of third-party RSS feeds. Sometimes, I see this in a pop-up window: Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
The RSS URL is just fine, but there's apparently something in the downloaded HTML that's causing a problem. Since the application is meant to run as part of a non-interactive digital sign, anything that requires a click to continue is completely unacceptable. I don't care how useless or malformed a URL is; the app needs to ignore the problem without pestering the user.
Unfortunately, I'm having no luck trapping this event. I'm sprinkling calls like this liberally through the code: [object].addEventListener(IOErrorEvent.IO_ERROR, handleIOError); where [object] is everything from the mx:Text object rendering the HTML to its mx:Canvas parent to the mx:Application top-level app, and handleIOError is a simple function that looks like this:
i was building a simple menu shown on a tutorial entitled Drop Down Menu and Linking it: Flash Toturial. Im using Flash CS3 action script 3.0 and i recieve this error 1087 syntax error extra characters found after endo fo program.
I'm building a site for a friend and I am having trouble getting rid of "Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found". I have the main site and 4 other swf's which are supposed to load and unload at the click of a button all together in a folder. Now, I've triple, quadruple-checked all paths and they're the same. It's really irritating me because I can't find the reason why these SWF files won't load at all. Here's my code:
flash CS4i trace the thumbURL it give me right path in output,but when i call it in new URLRequest. it give me Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
var thumbURL:String = "thumb/universe" + id + ".jpg"; trace(thumbURL); ///<<<<<<<<<<<<<<when i trace it it give me exact path var imageLdr:Loader = new Loader();
I am designing a mini-website that loads external swfs. One of my swfs is missing, so when I hit the button whose function is to load it, I get an output message that says:
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
So far, this makes sense to me. I got curious about how to let the user know that the swf is missing or otherwise let him or her know that I made a mistake, so I've learned about IO_ERROR. I came up with the following code and now I am not getting any error messages - but also nothing is happening. If there is content in the Loader already, it doesn't go away. If the Loader is empty, it stays empty.
function page4content(evt:MouseEvent):void { var myURL:URLRequest=new URLRequest("page4.swf"); myLoader.contentLoaderInfo.addEventListener(IOErro rEvent.IO_ERROR, ioErrorHandler);
1.) I have the following exact code for a button in a keyframe on the timeline (not in the button itself and of course excluding the quotes)
" on (release) { getURL ("www.yoursite.com", "_blank"); } " and I get the following error when I try and preview in Flash CS3 1087 : Syntax error: extra characters found after end of program.
2.) Also, I have another layer with a "stop" action taking place at the same time that this button occurrs, however, once I have the script in the keyframe for the button, it seems to override the stop action. So, basicly, IM looking to stop the movie and get this button to, once clicked, open a web address.
i am currently working on a user interface based project using as3,cs4 and xml, all of which is working fine except when i launch the .swf and this error appears in the output box
[Code]...
this is confusinig though as channelslide doesnt not exist anymore and after debuging the .swf several times to see if it was being referenced in the code i found that channelslide is not referenced at all.
I used the code below to make a preloader and it works fine when I try it locally, but gives me the following error when I try to use it in a website: "Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found." The preloader is a swf that pulls in another swf after it loads. Also when I use the swf that the preloader is pulling in, it also works.
After struggling for days, it seems I finally got the variable referencing between classes and custom event problems sorted out. Now I got a question regarding the Error #2044 and Error #2035. The error reads like this:
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
I've put all the swf in the same directory, so I don't think that is the problem. Could it be that my XML file is in another directory that's causing the problem? I also heard having quotes in the URL in the XML file could also be problematic. Is that true? Here are my AS and my XML file.
I am developing a photo gallery using the UILoader to load external (larger resolution) images after the thumbnail is clicked on. It appears everything is working when I test the movie, except I receive this error:
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
Again the loader shows, and the picture loads when it is done, I'm just not sure about that error message. The action script for clicking on the thumbnail is:
Code: function onBlackClick(evt:MouseEvent):void{ var myRequest:URLRequest = new URLRequest("pic1.jpg"); var myLoader:Loader = new Loader();[code].....
I want to load as many bitmaps as are in a folder, looping back to the 1st when I run out of files. I've modified code I found elsewhere for the error trapping, but it doesn't work. Instead of getting the traced 'Errorhandler: ' + event, I get 'Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.' in the output window.
So I'm trying to get cute again by building stacks of buttons dynamically, then labeling them from an external text file. The code I have so far is as follows:
[Code]...
But I keep getting the error message: Target not found: Target="undefined" Base="_level0" I'm not sure what this means.
I am developing a photo gallery using the UILoader to load external (larger resolution) images after the thumbnail is clicked on. It appears everything is working when I test the movie, except I receive this error:
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
Again the loader shows, and the picture loads when it is done, I'm just not sure about that error message. The action script for clicking on the thumbnail is:
Code: function onBlackClick(evt:MouseEvent):void{ var myRequest:URLRequest = new URLRequest("pic1.jpg"); var myLoader:Loader = new Loader();
[code]...
I have attached a .zip of my movie as it is very small. This is only a test file using shapes in place of thumbnails and dummy images just to see if I can get this working.
having an error 1069 Property_transitionManager not found in subMenu and there is no default value.at fl.transitions::TransitionManager$/start()at Painel3/onClick(Heres my code:
I'm developing a xml photo gallery and on loading the xml and jpegs I am getting a Error #2035 for "some" of the images being loaded. The wierd thing about it is that ALL images are in the same folder. (I'm currently doing a "local machine" to "online server" test). I'm not sure if its a case of progressive loading but you can see for your self .This URL generates a #2035 Error:
http:[url].....
While this image loads
http:/[url].....
i don't think its a case of the ".JPG" ".jpg" as the urls load the images in the browser. IS there anything else that can cause the image not to load? Just to note at a given time i am loading up to 300 images.
to call external as3.0 file in another as 3.0 file error: type not found..for ex.:i hv a as file car.as and in another racinggame.as file,call car. as in it.i found:error: type not found...car
I have a curious issue that I've never run into before... I'm trying to load an image into flash, and for some reason it's failing. Going by the JavaScript console, the "Network" tab (using google chrome) makes the request, I get the "pending" message, then "undefined", then "canceled".I'm trying to track down where this issue is, as the Flash piece is part of a much larger framework, so my question is whether or not you guys have ever heard of anything that could be causing this within Flash itself. I'm kind of thinking not...Anyway, here's my code in Flash:
ActionScript Code: private function loadImage():void {
