I have main MC when press it opens up and then has buttons in that MC.if main_MC is open then press it again will close it. Problem is I need to target the buttons inside main_MC but I can't cause it targets main_MC and thus closes the MCI tried doing main_MC.sub_MC.onPress = function ...... but it still targets the main_MC.
View 4 Replies
I've just finished the navigation buttons in my flash movie which take the viewer to the different sections of the site by directing the playhead to the right frame label. I've used the following code to do this:
on (release) {
this.gotoAndStop("info");
}
I have a problem though: I've also created a movie clip animation where two rectangular shapes move in simultaneously from the left and right sides of the stage creating a sliding door effect. When the viewer is in a particular section (frame) and they use one of the nav buttons to go to another section, I'd like for this animation to play (giving the effect of sort of closing a particular section) and then having another movie clip where the sliding doors open up in the incoming section to reveal that section. My problem is that I don't know what actionscript I'd use to achieve this. What code would I use on the nav button to make the first sliding door movie clip play, then have it move to the second sliding door movie clip and then finally go to the section labelled on the nav button.
Ok, here's the deal. I have a MC in a MC, but i want to target the middle MC.MainStage -> Clock -> clock(art)there is a button on "clock(art)" i want it to target "Clock" to animate. i know the root function should target the mainstage...how can i target that middle MC?
View 3 RepliesI'll try and make this as clear as i can, so as not to waste your time. I think it's something really simple i'm just missing...On the main timeline, i've got a movie clip ("mc_A") that contains two other movie clips ("mc_1" and "mc_2").at the end of it's timeline, I put a button in "mc_1" to play "mc_2". I'm using
on (release) {
telltarget ("_root.mc2") {
play () ;
[code].....
Here's my example, on frame 1 is an mc I created named holder. Inside there's an mc named box. Inside box are four mcs, circles1-4, inside the circles I have four skulls. If I want to affect only the skulls, what is the proper way to go about it?For instance, whats the proper way to write a trace statement?or , if I wanted the skulls to fade individually on mouse over, how would you properly go about writing this function?
function over(evt:MouseEvent):void{
evt.target.alpha = .5;
{
[code]....
I'm having trouble figuring out how to target a series of movie clips i'm attaching to my movie.I'm loading some xml for a slideshow and i'm generating a series of dots at the bottom of the screen to indicate how many steps are in the slideshow and the circle is meant to highlight your current position as you step through the presentation.the MC for the dots is two keyframes with a different color and a stop action on each frame.
Here's the rundown of the code:
1. There's nothing weird here, i'm just bringing the xml in [code]
2. Here is the loadXML function i reference in the xml.Data.onLoad above:[code]Okay so now i have some dots with the instance names, step0, step1 etc. right? And at the end of my loadXML function you see the firstImage(); function. This is where my problem is, how do i target the first (step0) instance? I have no problem when I write "step0.gotoAndStop(2);" but I need to figure out how to use a variable to keep moving it along when i make my next and last functions for the slideshow.
3. Here is the firstImage function:[code]how do i target the step the same way i target the image? do i have to go back and do something in the loadXML for loop?[code]
I am trying to target multiple tweens, trying to turn their visibility false/true. I have named each tween in the tween properties box, and I have targeted them like this: plane.plane2.tween1._visible=false (and so on), but no go! Only the first of the seven is actually affected--the others are not.
View 11 RepliesI have created several movie clips in a loop.
[Code].....
After they are added to the stage I later want to go back and alter their appearance. I am having difficulty targetting them:
[Code]...
I'm new to AS3 and have the following problem. MovieCLips inside another container MovieClip won't respond to a DOUBLE_CLICK event. I've added EventListeners for MOUSE_DOWN and MOUSE_UP and the contained MovieClips respond well to those, but not the DOUBLE_CLICK (Argh). Why? Doesn't DOUBLE_CLICK propugate to the children inside the container? I've tried doubleClickEnabled = true, but that don't work.
[Code]...
I want to add a logo to my dynamic menu tabs, the code below adds the logoLdr to the very last tab, but i want to add logoLdr to the first tab generated?How do i target individual tabs in this loop?
PHP Code:
function createMyMenu():void {
//This will be used to represent a menu item
[code].....
I made an array containg 3 clips and dynamically attached them to my main timeline. I can successfully tween all of them with the following code.
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
[code].....
I want to target ALL the 20 clips attached as below, at the same time, when I press the button "blue". However, my code can target only ONE of the clips at any time. I have tried attaching the clips to a separate dynamic clip and then targeting it but problems with the registration point (0,0) of that clip means I cannot achieve the result I want:
Code:
for(i=0;i<20;i++){
mc = this.attachMovie("red","red2"+i,i);
var scaleFactor:Number = Math.random() * 80 + 20;
mc._x = Math.random()*500;
mc._y = Math.random()*400;
mc._xscale = scaleFactor;
mc._yscale = scaleFactor;
blue.onRelease = function(){
new Tween(mc,"_xscale",Strong.easeOut,mc._xscale,200,3,true);
new Tween(mc,"_yscale",Strong.easeOut,mc._yscale,200,3,true);
}}
I'm trying to make a flash widget that loads thumbnails from an xml document and have each thumbnail link to a different web page. So far everything works fine but I don't like using _root incase the widget gets loaded into another swf. In my expereice _lockroot dosen't always work.the line highlieted in red will only work if targeted through root as opposed to all my othere reference to ["placeHolder"+i] which use this.["placeHolder"+i]. I've tried _parent, this._parent and adding lots of other _parents. Nothing will work this is the file structure _root.placeHolder'N'.tn_mc. how I can substitute _root for a relative path.
widget_xml = new XML();
widget_xml.ignoreWhite = true;
widget_xml.load('flashWidget.xml');//path to document
[code].....
[URL] Theres the example to work with....anyway....as you can see, im loading in movies externally...each on its OWN different level....what i want to do is make it so that when i click a menu option on the left, the current swf loaded on the stage closes and the new one comes up (to avoid the clutter of 10 differnt windows all scattered).....here are my thoughts:
1. have variables on the root timeline that are basically "currentLoaded" and "currentLevel" -- which basically will store the name of the currently loaded swf and the level that its on.
2. each swf would have code on frame one that would see if the 'currentLoaded' varible is blank, and if not...it will close the current loaded swf ....
my dilemma is that i dont know how to change the level dynamically...i know you could do the instance name like this:
[Code]....
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
How can I hide all children clips except a specific one with actionscript 3 ?
View 2 RepliesAs most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code:
//Don't worry I have an OnEnterFrame function here;
//attachedObj= the character; figure= the MC name of the character;
attachedObj = attachMovie("figure", "figure"+1, 1);
[Code].....
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 RepliesI'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?
View 5 RepliesHow would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
After the dublication of an movie clip,
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.
I'm making a OSX-finder-type file browser in CS4.The Structure for the folder and files is being generated by a PHP in a XML, heres an example:(sorry the xml is not sorted, but the command i'm using in php doesn't sort it)
Code:
<root>
<dir name="images">
[code]....
Does anyone know a good reliable way to get movie clips to point at other movie clips? I use MX 2004.
View 1 RepliesHere's what I'm trying to do (in example form): I have a movie clip called "dude". Dude is animated to walk around, then drop a cigar (all inside the movie clip). But the problem is, dude moves, so if you try and move dude as the cigar is dropping, the cigar moves with him. So what I want to do is create a new movie clip instance called "cigar" OUTSIDE of the movie clip dude right as he's dropping it, so that you can move him without moving the cigar. Get it? I've attached another helpful animation to explain.
What I have right now is, on the 13th frame of dude, a few lines of code that create and place an instance of cigar. In that frame I also have an invisible instance of cigar for me to duplicate. Inside of the cigar movie clip is the animation that makes it fall to the ground. I need to change that code so that the instance of cigar is created outside of the movie clip dude. Here's the code I have now (inside of dude, on frame 13):
[Code]...
I have a problem stopping multiple clips. I have created a presentation using flash and I have many movie clips which have sub movie clips inside of them. Ok lets look at one movie clip in detail. Inside one _root movie there are multiple sub movies; each with a different movieclip labels (each movie clip is named with unique labels ie. north, south, east, west, and What I need to do is be able to STOP all these sub movie clips with one stop, and in turn PLAY these same movie clip with a second action.
The only way I know how to stop all these sub movie clips is to target each and every one individually.
[Code]...
What I'm trying to do is have my Flash piece have custom elements set by an XML file. I'm using ColorTransform. I have a piece that's loaded as a separate movie clip, and I can't figure out how to get to the piece and apply the ColorTransform.
Here's one example of what I'm doing for a different element on the same mc.
[code]...
So, in this example, I'm setting header_mc to a color specified in the xml. In the case I'm having trouble with, I want to set a color to a movie clip on the timeline and not the main movie
I am setting up a flash game with seven toggle on/off buttons that all do the same thing.I know how to assign them all to be able to do the same function in the main timeline. What I can't figure out is how to get them all to also do the same function within each of their respective movie clips.
Here's the code:
Code: Select allstop();
DontDrive.addEventListener(MouseEvent.MOUSE_OVER, RO_DontDrive);
DontDrive.addEventListener(MouseEvent.MOUSE_OUT, ROut_DontDrive);
[code]....
I've been trying to reproduce an animation effect I've seen on the Armani website, but I'm stuck trying to duplicate an empty movie clip with image loaded into it. The duplicates exist and I can move them, but they are invisible. Since the duplicates reside on depths above the intitial clip I'm confused about why they are invisible. The duplicates are scripted to follow behind the initial clip - each offset by 30 pixels (though I don't have that working perfectly).
View 1 Repliesokay, i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect... my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) {
play();
}
i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect...
my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) {
play();
}
also if you want to see what the problem is, here's the website in it's infancy (700k)
