ActionScript 2.0 :: Add A Setinterval Function To Slideshow?
Jun 16, 2004
I added a setinterval function to my slideshow.Prob is when the slideshow reaches the last pic it returns to pic1 goes to pic2,... but after the second loop it starts mixing the wrong pics for the wrong number.I guess I did a mistake in the if statement(if (nextSlideNode == null)...). can someone solve this for me.
See following code below. Also how can I stop this animation. I did something like learinterval(advance); but that did not do the trick.
I'm using a version of XML Slideshow Photogallery that loads slideshow.swf (and other pages) into master.swf. It plays good the first time through and when I trace myInterval, I can see it increment 1,2,3 ... with each slide. When I go to another page and then come back to the slideshow - the myInterval will skip a couple or I get 2 values at the same time. This causes the slideshow to display every other image (or every 3, etc). I can see that the problem is from not clearing the myInterval variable properly. The clearInterval(myInterval); function seems to just clear the last instance created. Is there a way to clear all instances?
how to use if/else and setInterval statements on the cross fade slideshow. I am trying to edit the code to have the xml slideshow loop back to the first image and play continuously. I am ok following existing code, not great at writing/editing my own. I thought I needed to work within the nextImage function, and add a slideshow (); function. I haven't been able to get it right. Here is the code minus the xml loading part:
I'm creating a banner ad that tweens a thought bubble.It has 3 bubbles which tweens from the small bubble(1st one) to the big(3rd)one every 1/2 second with the setInterval function and then Invokes another setInterval which changes the text in the big bubble every 2sec. I got it to work perfectly, but the only problem is that I cant get it to loop through again properly. When I try to invoke the setInterval "animBubble" in the changeText function it doesnt read the clearInterval in the "animBubble" function causing it not to stop once the 3rd bubble has tweened in.
ok how and where do i put the setInterval script if i want to execute the "animateThumbsToLeft" function for 6 times and inbetween each time have a delay of say half a second..
how to clear the interval in this code? I'd also like to know if there is a better way of firing makeStars() than using setInterval in a function - like I'm doing. I've looked at the Kirupa tutorial and I'm not seeing what should be done.
Basically, this attaches a number of stars within the Stage width and height properties. When the browser resizes I rewrite the stars to the screen with the new bounds. But I can't get the interval to stop, so the stars just keep getting replaced - disappearing and relocating abruptly.
It all works great outside of the resizeIt() function, but once inside she goes down hill from there. A couple of things I need cleared up (pun intended) are:
1. Am I creating a new interval each time resizeIt() is executed?
2.What is the scope of the interval(s), and does how you access them change depending on where you are in the code, or are they more global?
stop(); //number of stars to make var numstars:Number = 100; _root.attachMovie("background","bkgd",this.getNext HighestDepth());
I have a function on my script that attaches a movieclip on a specific position and then it duplicates it several times. This movieclip has a code in order to move across the stage randomly. When I try to use SetInterval to repeat this function two weird things happen: the movieclips don't duplicate over that specific location (they appear on x=0,y=0) and if I set the location only one duplicates and the rest don't. My question is: what can I do to repeat the function every 2 seconds exactly as it is the first time it runs, without the objects not duplicating or moving from the original location?
Here's the code: meteoros = function () { this.attachMovie("asteroid","asteroid_mc",this.get NextHighestDepth());
[AS] _root.logo._alpha = 0; //Stt alpha p logon till 0 _root.meny._alpha = 0; //Stt alpha p menyn till 0 var donealpha:Boolean = false; //skapa en Boolean var doneshrink:Boolean = false; //skapa en Boolean var donemove:Boolean = false; //skapa en Boolean [Code] .....
The first two functions wont get executed.. I have tried to put trace("test") strait under the function ...(){ but it wont execute it..
I have four buttons on the stage which I want to move 20 pixels up (easing) and fade in from 0 to 100. But I want them to appear with a interval of 1 second. I came up with the following function:
Code: function showClips(yPos, alpha, speed) { var endY = yPos - this._y; this._y += eindY /speed;
I have a function that draws a rectangle on the screen (see createInfoPanel())While drawing rectangle, I am adding 2 text fields on it.But as you may guess, it is adding those immediately. I want to delay adding these text fields, then I want to remove these panels after a while. The problem is, when I set an interval or timer, they won't work after I using once (I had to stop them by clearing/removing, it didn't set them again).Since my panel is being created each time image changes, I need them to work every time image changes.
So, I have 2 questions:1- How can I re-set interval each time my createInfoPanel() function works? It won't work anymore after setting and claring once. 2- You can see infoPanel.addChild(titleField); line in addInfoPanel() function. How can I work a smooth animation here? I mean, text appears slowly?
I have a custom class called SpeedCheck, in this class I have a function called Activate(), I am trying to call this function using setInterval from another class but I am not sure how to format it.
I am doing some animation using setInterval. It runs ok on all browser(firefox, sarfari, and opera..), but not in IE8. I just check ie7, it works fine also.
My issue is that I want to set up a system whereby I can register clips to a class that will have certain properties set and then animate changes in those properties. Namely, each clip is placed at a different _y position at authoring time, then at run time be repositioned at a different _y position, only to be animated back to the original position. I want to do this so I can edit the clips in their destined places to layout their positioning.
Visually, my code works fine but, as is apparent from the "trace("muvUp "+thing);", the interval isn't being cleared. And what's worse � at around 40000 (of getTimer()), the clips start disappearing.
I've attached a file but here's the code I'm working with (as you can see with the lines I've commented out, i've tried a few different options):
//MY CLASS ON FRAME 1: function wordsClass(){} wordsClass.prototype = new MovieClip(); wordsClass.prototype.onLoad = function(){
I am creating a text scroller and am having problems with clearInterval - the text starts scrolling, but it won't stop after I try to clear it upon a button click.
1. I declare a var (uint) equal to a setInterval() call within a function (if the text exceeds the width of the textField)
2. I have a button that "turns off" the mp3 player (swf) and resets all the text fields.
3. I can't seem to access the setInterval ID var from within the click handler.
I have declared the var (uint) at the root level, then set it to setInterval() within the function. Then I tried to access it from the click handler. I thought this would work since it's global at that point, but it doesn't.
Here's a link to the page so you can see how it doesn't work [URL] (you have to click on the last link with the long client name)
Here's the code that's involved with this function (of course this is only the relevant code, but I would post the fla when done for anyone who wants to use it):
Code: Select all//::: SCROLL DISPLAY TEXT function scrollDisplays():void { (trackTextField.textWidth > trackTextField.width) ?
OK, trying to fade out a button through a function. I've done this before but I'm tired and it's just not happening. OK, there's a button named "button" and a movieclip named "fadeThis". The first frame of the root has the following code in it:
I have a random array of times in milliseconds, of which I want a function to be called on. Problem is, it seems to be ignoring the times in the array, and instead using the number of items in the array as a guage of how fast it should call the function. Any pointers?
i've tried searching the forums and fighting with this way of fading the movie clip in and out. The movie clip has an instance name of "box", my brother also can't figure it out.
Code: var fadeChecker:Boolean = true; function flicker():Void{ if(box._alpha >= 100){[code].....
i'm reusing a function as a timer with setInterval. it works the first time around but then for some reason the counter var gets stuck at 10 (the delay var = 10) and won't reset and start counting up from zero again...code:
As entitled in this post, suppose we have wrote in timeline
[code]...
The problem emerges because I want to use local variables (i.e. a and b) to perform tasks of myF2 on several clips at the same time but started, say, a half of second one after the another. I don't want to use timeline variables because all clips must start with the same initial variable values.If it's impossible to use setInterval like this, how is it possible to fix the problem I described here? .This code is for Flash Professional 8.0
I have a function that draws a rectangle on the screen (see createInfoPanel()) While drawing rectangle, I am adding 2 text fields on it. But as you may guess, it is adding those immediately. I want to delay adding these text fields, then I want to remove these panels after a while. The problem is, when I set an interval or timer, they won't work after I using once (I had to stop them by clearing/removing, it didn't set them again). Since my panel is being created each time image changes, I need them to work every time image changes. So, I have 2 questions:
1- How can I re-set interval each time my createInfoPanel() function works? It won't work anymore after setting and claring once.
2- You can see infoPanel.addChild(titleField); line in addInfoPanel() function. How can I work a smooth animation here? I mean, text appears slowly?
I have a function ("advance_slideshow()") that ticks a slide show up by one, then it loops back at the end. It works when called from the key listener I set up for debugging. However it does not work when called from setInterval. I added a trace to the function to confirm that it was being called, which it is; it just doesn't work when called via the interval
Code: ////////////////////////// /* IMPORTS AND INCLUDES */
