The code that u have recommended is not working properly... What i meant is that the function of the back button is to navigate where the users has last viewed the webpages..
View 1 RepliesI am creating a website using the slide presentation template. However, when I navigate to a page I have already viewed, it only shows the last frame of the slide rather than starting from frame 1 of the slide. Is there I way I can tell button to go to a slide and play from frame 1 regarless of how many times the slide has been viewed?
View 6 RepliesI have a flash piece that contains a short intro animation and then loads a photo carousel.After a user has entered the site and viewed the home page information including the opening intro , i want to make settings so that when user goes back to the home page during the same visit he/she doesn�t have to wait for the logo intro to load.
View 0 Repliesi created a preloader, but the font i chose cannot be viewed by other users beside me... or another person who has it installed! whow can i overwrite this problem?
View 9 RepliesAnyways I am using action script 3.0 and I created multiple layers using just one scene. I created a layer with lables on them to mark where I want my buttons to point to and go to. I have the stop (); on the first frame. And I made my buttons mostly interactive with movie symbols and tweens.My first scene I have 2 doors, the user can pick which door to go to and it takes them into a different path.I made the buttons that are clicked to go forward, and then I tried to make an invisible button on the button edge of the scene to go backwards However, the PROBLEM is when I click my button to go backwards I am stuck on the first page and can't move forward.
function gotoOne(evt:Event):void{ gotoAndStop("one")}backbutton1.addEventListener("click",gotoOne);
function gotoFour(evt:Event):void{
[code].....
I've a couple of website on thefwa.com in which you can avigate by using the back and forward buttons on the browser.[URL].. Look at the URL String. It's done through that.
View 1 Repliesas a follow-up to my question earlier. Where would I be able to locate the transition script so that I can delete it alltogether and allow users to navigate with solely the previous and next action buttons. (And what verbiage [more or less] am I looking for)?
View 3 Repliesbasically this code will work like a browser back button its very simple but "could end up very long" basically it will act "similiar to the browser back button"
Code:
on (release) {
if(page1 = _currentframe){
_root.gotoAndStop("quiz");
} else if (page0 = _currentframe){
[code]....
it works when the (page1 = _currentframe){ is rotated with the first if statement...because for somereason it seems to not recognise the "else if's"
i want to know how we can make back button in flash to go back to page same like browser back button.
View 1 RepliesI have a problem with a preloader on a slideshow. The preloader works perfectly the first time the slideshow is loaded but if you move to another frame and then return the loader bar loads in the top left hand corner of the stage and does not function, it just duplicates every time you navigate back to the page.
[Code]...
I have an action script code for playing a nested movie clip from the main timeline. I want to come back to the frame2 of the main time line when the nested movie clip goes to the last frame. Which code I have to add at the last frame of the nested movie clip to come back to the frame2 of the main timeline..
View 1 RepliesI have this script (below) and I'm using the next/prev button script to navigate back and forth. When I navigate back to the first page which has the actionscript code to load the music, it begins to load the song again and they overlap. How do I stop loading when song is already on?
var audio:Sound = new Sound();
var req:URLRequest = new URLRequest("MenuBackground.mp3");
audio.load(req);
var channel:SoundChannel = audio.play(0,1000);
var xForm:SoundTransform = new SoundTransform();
musicOn_btn.addEventListener(MouseEvent.CLICK, playSound);
[Code] .....
I'm building a site to showcase various engagement tools for the web. Most of what is involved is new to me. My biggest challenge is finding the right AS3 code to make buttons link to URLs. when I try to duplicate it and change the btn name, in order to make two, or three or four separate links to four unique buttons I get an error about trying to call the same function more than once. This is her code and as I said it works for one button link. Can it be made to work for multiple instances?
inv_btn.addEventListener(MouseEvent.CLICK, buttonClickHandler);function buttonClickHandler(event:MouseEvent):void { navigateToURL(new URLRequest("http://www.adobe.com")); trace("I'm clicked");}
Right now all of my links use the Properties text link feature, which continues to deliver target=blank function despite my having deleted the target and saved and republished way more than once.
[URL]
I am having serious problems with creating a simple navigate to URL in Flash CS3. The code I have is:
[Code]...
I have put this in the first timeline in my movie. When I "check syntax" everything seems great. But when I publish as AS3 I recieve the following error:
[Code]...
I am currently building an assessment in flash using AS3. I want to have all navigation buttons visible on the main screen, including the "assessment" button where users will go to sit an assessment based on the content they just viewed.
how can I lock the assessment button until all the other pages containing the content has been viewed? A bonus would be a pop saying something like "Please view content first" appearing when they try to click it.
But on this occasion I have created an assessment in AS2 and I want my "Take Assessment" Btn disabled until the rest of the content has been viewed. If someone clicked on the Assessment button before it is viewed it would be good to have a message pop up saying "content must be viewed first" or something like that. How do I do this?I have the content set up in scenes.
View 1 RepliesI'm trying to record video from the users webcam and play it back at a later date.
I call
[Code]...
However, when I look at the FMS Admin Console at the streams in app/_definst_, their types are either "NetStream" or "Live". If they were being saved wouldn't they say "Stored"? After I close the application doing the recording, the "NetStream" type stream disappears, and after a while all the "Live" typed streams are gone too. Nothing is saved.
I have no idea what is happening. I don't know if it's a problem with my AS3 code not closing the recording properly or if I'm doing something else wrong, or maybe somethgin isn't right in the FMS?
Having spent ages finally getting an active/viewed button script to work, I thought all I had to do to complete things was add the button actions (I want each button to load an external swf). For some reason, this is then preventing the above working as it should. I suspect it's obvious to someone who understands this stuff, but I've got things working so far through a mixture of copy/paste and trial&error, and I've got completely stuck at this last hurdle.
[Code]...
I think this may have something to do with the order it's all in, and I suspect having most of the above commands in a for / if loop might not support me adding additional actions afterwards which may overrule the other ones.without anyone else wasting too much time, if anyone can see the (presumably obvious to some people) mistake I'm making in the above, please let me know!
I've been having a bit of a hard time understanding how to get a button which I have created in Flash to navigate to the next slide of the PowerPoint presentation which it has been added into.
I understand that I somehow need to make use of fscommand in ActionScript, but I'm not sure how I can get Flash and PowerPoint to communicate between themselves.
I'm using Flash MX 2004 7.0 and Powerpoint 2003.
My first time making anything in flash, so go easy on me. I made a set of navigation buttons for a website I'm building for a friend of mine.
When I make it in Flash, everything looks perfect. When I save it as a movie and run on my computer (in Flash Player 6), it still looks perfect. But when I put it on my website, the "M" in "HOME" gets distorted (on all browsers). See here: [URL]
Using Flash MX, can't afford the upgrade to CS right now!
I have a Flash website with 3 interfaces( 3 frames with movie clips inside). they have a button that goes to different loaded .html page(text). But once the back button is pushed on the web browser, it always goes back to the first frame instead of the actual last page, which might have been frame 2 or 3.
View 1 RepliesI'am making a advanced mp3 player arund this tutorial: [URL] and i want the users of the player to see how long they have listen or how long time back of the song. i have the AS i what to use but i cant connect them. becuase the tutorial i used does not make a sound objekt (MUSIC)
[COde]...
I'm trying to put together a sideshow using a modification of load_images.fla (a sample file supplied with Flash) combined the the 'Kirupa Menu with Slider' tutorial ([URL]) The slideshow uses a 'next' & 'previous' button to click thought the images. In addition to this I have a separate slide menu navigation (currently just numbers 1-7), with a rectangle highlighting the number of the image being viewed. I would like to move the rectangle to show which image is being viewed, when the 'next' or 'previous' button is pressed. The follow code shows the actionscript for the 'next' & 'previous' buttons....
[Code]....
I have an interactive story divided into scenes. At the end of each scene a button appears. This occurs on a frame on the timeline.
There are two different buttons that might appear based on whether a prior scene has been viewed or not.
For example, there are Scene_1 and Scene_2. At the end of Scene_2 one of two buttons will appear. The buttons will be either "Go see Scene_1" or "Return to Main Menu".
If the user has already seen Scene_1, Flash will know that and automatically go to the frame in Scene_2 that contains the button "Return to Main Menu".
Conversely, if the user has not seen Scene_1, Flash will know and automatically go to the frame in Scene_2 that contains the button "Go see Scene_1".
I imagine there would be an action frame at the end of Scene_2 that will contain the as2 code to enable this action.
Perhaps something like, but probably not at all like the following:
if ("Scene_1", last frame == true){gotoAndPlay("frame#");}else{gotoAndPlay("frame#");}
I'm working with Flash CS4 / ActionScript 3.0I just wanted to know how to link my finished flash ad to its corresponding webpage.-->Click anywhere on the banner and it links you to...youtube or whatever :]
View 5 RepliesI am trying to create a personal portfolio website using Flash CS4. Understand that there are a number of ways to create web pages using Flash. One way is to create separate swf files for the web pages and load them when the web page is requested. Another way is to put the pages in separate frames in the same swf file or to use scenes and use gotoAndPlay(). Another possible way is to create separate movie clips for the web pages.
View 1 RepliesI posted this on the Apache board, but after 4 days with no reply am still needing an answer so I thought I'd try here.
Needing a testing server I installed Apache 2.2 and PHP onto my Windows XP Laptop. That went great. However I can't run flash modules, like, for example, a video player streaming an FLV.
I was only able to install Apache and PHP by following directions, but don't really know much about such installs.
What do I need to do to make Apache run (display) flash?
I'm writing a small game app in Flash, and I'm wondering what the benefits of having one giant SWF loading everything vs multiple webpages and multiple SWF's.
View 1 RepliesI've been building a website for a friend: WEMI.
The thing is I'm using a script I bought from Activeden.net which is awesome and works great for displaying external webpage's within you flash site.
However, there are a few issues. If you visit the link above (WEMI) and navigate to either "Till salu" or "Frmedlade hem" you'll notice that the popup is not positioned in the middle. Also, the popup only goes away if you interact with it, such as scrolling down or something like that. You can't just click on another button, say "Kontakta oss" and continue navigate. I just won't go away.
"You can call setInvisible(); through the popup reference (in the example called p) and to center it you can add a resize event listener to the stage and in the callback function set the x and y of the popup"[code]...
Ok I have create several buttons to navigate to other urls, and one of them is working but the other 3 I have are not working. All I did was copy over the code and change the differences between the two. I don't get any errors or anything but when I click on them nothing happens...
var myspaceSite:URLRequest = new URLRequest("http://www.myspace.com/thehangoutinfo");
myspaceBtn.addEventListener(MouseEvent.CLICK, goMyspace);
function goMyspace(e:Event){
navigateToURL(myspaceSite);
}