did the tutorial on this site for an xml image gallery - it worked great... My question would be is there a way to accomodate for multiple image sizes that would allow the image displayed to be centered?
View 1 RepliesI have a gallery where passing over the image a rectangle drops down showing the caption for the image. The informations are read from an XML file and some of my images don't have a caption, for those emails I want to avoid the tween.
[Code]...
I'm trying to find out how to make a simple image gallery which changes image upon a mouse click on a button, when a button is pressed I want the image to slide in from the left into the viewable area and then when another image is selected I want the previous image that was viewed to remain in the screen and then the new image slide across over the top to replace the image.
I can get the images to slide across from the left upon a mouse click however I can't change the layer order so if image 6 is viewed and then I click to see image 1, the image will slide into place however it will be below image 6 so therefore not viewable.
I don't have an example of what I'm after but I hope my explanation was good enough, I've seen this been done in javascript but I have to use flash and am unable to replicate the effect I'm after
I have this piece of code to change images. I was trying to figure out how you could put a timer on the code, so if the image has been displayed for say 5 seconds it diverts to the next image automatically? Also if it's not to hard, when it has played to the end to divert to the 1st image.
[Code]...
Just wondering if anyone knows about the project I am trying to start, uploading images from flash using php is fine but wondering if anyone knows how to create dynamic xml from php and it takes all the image names from the same folder where those images have been uploaded. So we can load all the images in image gallery through xml into flash.
View 5 RepliesI have found an excellent tutorial and source file for a 3D image gallery. However I would like to make the thumbnail click thorugh to a url link when pressed rather than loading the image into the gallery.
Currently the images load in through actionscript. Is there a way to amend this script so you can specify that a thumbnail clicked links through to a url, like you would with a normal button instance rather than loading the image. Here is a link to the file and tutorial. The actionscript is on the top layer within the file.[URL]...
I have found an excellent tutorial and source file for a 3D image gallery.However I would like to make the thumbnail click thorugh to a url link when pressed rather than loading the image into the gallery.Currently the images load in through actionscript. Is there a way to amend this script so you can specify that a thumbnail clicked links through to a url, like you would with a normal button instance rather than loading the image.Here is a link to the file and tutorial. The actionscript is on the top layer within the file.URL...
View 9 RepliesI am am not a developer but have bought a template which I am modifying to suit my needs. I have made most of the modifications but and stuck on how to change the animation for the image gallery. When I move from one picture to the next the animation effect is something like a bubble burst. This is too flamboyant for me. I would like to change it to something more sleek but have no clue where to start.
View 1 RepliesI have a dynamic image gallery that pulls the pics into a movie clip and adds them to the container (slider) The issue i am having is that when i click on this i am essentially clicking on all the items collectively and i would like to be able to click on each image seperately...
[Code]....
I have an image gallery but I can't seem to get the previous image removed. I have two functions:
ActionScript Code:
function clearLoader():void {
try {
var li:LoaderInfo = slideLoader.contentLoaderInfo;
[Code]....
But in some way not the previous image is removed, but the one before that. Annoying, because if image 1 is larger than image 2, image 1 stays on the background. It is only when loading image 3 the first image is removed from the stage.
So I'm having some trouble modifying this script. I have a text box so a user can go to a certain image (In my case page). So if the user type 5 it should go to image 5I've tried numerous methods, none of which are working (they work but then my next and previous buttons aren't working properly). I know I need to just get go to the number image in the array but the way the script is set up it seems I would have to change the current position value but that doesn't seem to be the case.Am I over complicating this?
ActionScript Code:
function loadXML(loaded) {
f (loaded) {
[code].....
I would like to be able to add the functionality of being able to load different galleries from a menu without loading a new mc with gallery inside it. I managed to botch the file up pretty good on my own, and was wondering if there is a ready answer nearby.So I'm thinking have but1, but2 and but3, with a seperate xml file for each. What would you recommend for a smooth way to swap the the xml files to the gallery, and load the first image of the new xml file? Also, can it be done with one big ol' xml file while keeping the galleries seperate? It's not necessary, but could be handy, and save some loading.It would also be interesting to apply the same principle to the resizing script that Scotty has in that big Resizing thread, just a thought.
View 2 RepliesSecond, I'm struggling a bit on xml and hoping for a hand. Your xml image gallery is a sweet piece of work, and I would like to be able to add the functionality of being able to load different galleries from a menu without loading a new mc with gallery inside it. I managed to botch the file up pretty good on my own, and was wondering if there is a ready answer nearby.So I'm thinking have but1, but2 and but3, with a seperate xml file for each. What would you recommend for a smooth way to swap the the xml files to the gallery, and load the first image of the new xml file? Also, can it be done with one big ol' xml file while keeping the galleries seperate? It's not necessary, but could be handy, and save some loading.
View 5 RepliesI'm told that the following chunk of script will center the stage on resize, but not knowing much of anything about actionscript,
myListener = new Object(); myListener .onResize = function () { ... } Stage.addListener( myListener ); // later ... Stage.removeListener( myListener );
I have a movieclip on the stage which has the dimensions 400x400.I currently load images,and add them to this component.Each image is a different size. At this moment in time, they are placed at position 0,0 within the movieclip container.Some of the code looks like
var data:XML;
var total:Number;
var url_list = new Array();[code]....
Is there anyway I could get the loaded images placed at the center of the movieclip container.I dont know if I have to do something like subtract the images width and height from the containers width and height, and then divide by 2?
i've created a rotating banner with images and wanted to increase the stage size so i can put an opaque larger image in the background and have the other images rotate on top of it. when i made the stage larger i'm having difficulty selecting the other photos so i can center them back on the on the stage. i was able to get the first image centered but i only see the outline of the other images.
View 3 Repliesi am trying to get an empty movieclip to center after a jpg loads into it. the images load, but they don't center. my first attempt (using loadMovie) would read the size too quickly and would only center after a second click. i thought using a MovieClipLoader would work, but my leftEdge always returns 350. i'm getting a 0 value for _width.
on a related topic, i want to apply a DropShadowFilter to the same empty movieclip.i haven't tried it with the MovieClipLoader, but it didn't work using loadMovie. any ideas on that? if i have to, i can create a generic dropshadow and position and scale it accordingly, but again, i will need to be able to read the size and position of the empty movieclip.
Code:
var mcl:MovieClipLoader = new MovieClipLoader();
var mclListener:Object = new Object();[code]...
I'm developing an ActionScript 3.0 app for Blackberry Playbook. I have a Loader with a fixed size of 240x240px. The images that can be loaded inside are smaller or bigger than 240x240px, and also they aren't squared. I use this code to resize that images:
[Code]...
I am needing to load an external image (probably jpg) into a movie. I am using an empty movie clip, giving it an instance name and the code:
Code:
instance1.loadMovie("image.jpg");
What I also need to do is be able to either place that image in a specific location on the stage or just center it. Any advice you can give me on that?
I am attempting to do something like this: Use two movie clips. One is a holder that contains the second movie clip, which is where the image is actually being loaded. Then, I am using the following math:
Code:
instance1.isntance2.x - instance1._width/2 instance1.isntance2.y - instance1._width/2
Does this look like it would work? Is there anyway I can set instance1 to have a width that is equal to the size of the main movie (1024 x 768)?
Im having problems of centering my images dead center of my resizing frame.
heres the code:
// All the credits go to Gorlim from www.flashxpress.net
// You need 2 clips in the library: btn and fond
cmpt = 0; //handles depth to attach
[Code]....
Im trying to use a Loader component to add images to my flash file externally because i need to use a single loader for multiple images of various sizes the centerpoint is forever changing the centerpoint is ALWAYS to top left (as seen in image) and i cant figure how to change it.Ive used the following actionscript 2 code which i would have assumed it would center it fine but its never truley centered.[code]
View 1 RepliesI'm working on a fullscreen application that doesn't run flash on the browser. Running Flash player 10. When you open the file, I have fscommand to run fullscreen, the flash file is built at 1280 x 800, and I have an image (menu screen) that starts off the flash file. I'm trying to find a way to center the image to the native SCREEN resolution, not the flash resolution. Is that possible?
I have this code running on the menu MC:
onClipEvent(enterFrame){
this._x = Stage.width /2;
this._y = Stage.height /2;
}
I've tried other variations of this, and no luck. On my 1280x800 native resolution monitor, it's great. Tested it, and it works. However, if I run the same file on a 1920x1080 monitor, the image is on the lower right hand corner. Also, the image at the moment has a center anchor point, but I'm sure you realized by my simple code. Also, just escaping the fullscreen mode, and scaling the window also screws up the formula. So I'm not sure what I can do to make it dead center no matter the screen res, or size of window. The reason I need to do this, is also because there are times where I have to change the flash resolution, and I don't want to go into the image everytime to adjust the center.
I am creating an image gallery and the images change but change right back to the original image. I had it working yesterday but today it doesn't work.
[Code]...
I've been going through the tutorials and forum trying to build a photo slideshow. I managed to get the slideshow working with buttons, but am really stuck with trying to center the images ... I'm using portrait and lanscape images, and want them both to be vertically and horizontally centered in a 504x504 moive.
View 2 RepliesI'm looking for the best way to get a flex 4 image object to resize and horizontally center whenever its parent container (a custom component based on group) resizes. I cannot set horizontalCenter="0" to accomplish the image centering because I use a move transition to "slide" the image in and out of view.
I'm externally setting the image source in the component. Here is a simplified example of my component code that only addresses resizing the image.
<s:Group xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/halo" >
[Code].....
i was looking for gallery looking like this site [URL] i was looking gallery first page title gallery then Big image like this with description.
View 1 Repliesi am trying to add extra images to the photo gallery attached. I would have thought it is easy and it seems so. I add an extra image to the gallery. I publish it. The html file shows the extra image in the gallery but the swf doesnt. driving me crazy, cant work it out?
View 14 RepliesI've made a gallery slideshow before but wasn't as intuitive looking back at it now and I want to start fresh on this new project. I would like to convert a jQuery lightbox style gallery into a flash XML based AS3 image gallery with categories. I don't want to code the FLA, I want separate AS files.
This is a school project for my website. I would use jQuery and I have more experience with it but this project needs a flash component. I'm just not sure where to start and looking for some advice on how and where I could find resources. I want it to be minimal as I can make it;
- 8 thumbnails to a "page/section" with more flowed into page 2 or 3 etc. (or a srcoller)
- a few buttons for categories
- images fading in full size with a description when hovered over and a close button
- preloader (simple bar)
Esentially something like this > http:[url].........works which is using http:[url].... for the thumbnails. That might be ambitious but I'd suffice with a simple fade effect.I've downloaded some galleries out there but most of the code is messy or outdated.http:[url]... this is alright, but all the code is done in the FLA. I might break it into AS files but it depends.
Just trying to make a flash photo gallery that displays all the image files in a certain directory with the usual photo gallery functionality.
View 1 RepliesI did a website using actionscript 2 where the content was centered on the browser window both vertically and horizontally.
e.g. [URL]
all that took was a small piece of actionscript code that i can't remember now.
Now using actionscript 3, I can't find such code anywhere, instead I am guided towards using dreamweaver and css which seems like a nightmare for me to achieve. Such a fundamental thing should be possible with minimum effort surely?
Also, I have a similar problem where I'm trying to repeat tile or just add a textured background behind the stage. This also seems like I'm having to use html/css to achieve. I'd rather just use flash if possible??