Does anyone know what I can do to change the claudio scroller so that it will scroll ease depending on the vertical mouse position?
View 4 RepliesUsing this code made by Genesis F5:
Code:
// EXAMPLE CREATED BY GENESIS F5 (www.flashkit.com)
stageheight = Stage.height / 2;
overhangy = ((stageheight * 2) - image._height) / 2;
[code]...
Basically, my problem is that i've got 15 buttons labeled Channel 1 to Channel 15, but when the page first loads up, it skips down showing the very last button at the bottom, rather than the very first button at the top. The top button is off the screen.
I'm looking to a menu that scrolls vertically depending on the mouse position.I know that voetsjoeba has a cool scroller that does this, but loads XML and such. I'm just looking to scroll an MC up and down with easing depending on the mouse position.I like the way that the new XML thumbnail gallery that Kirupa put up scolls along the bottom, how about something like that?
View 4 Replieschange vertical scroller to horizontal scroller?
View 2 RepliesI am creating mouse scroller and when I insert actionscript my images wont move depending on the mouse movements..I am using Flash cs5 and Actionscript 2.0...this is my actionscript:
[Code]...
fixing my XML thumbnail images to work with Claudio's scroller. The scroller doesn't adjust correctly to show all of the dynamically loaded thumbnails..? I found this thread explaining why this is happening but I haven't been able to correct the problem with the suggested fix.
http:[url]....Apparently the variable located inside my scroller,
"bottom= thumbnail_mc._y-mask_mc._height+thumbnail_mc._height-space;"
is set before the XML has finished loading so does not calculate the correct mc_height to work with the scroller and show all the thumbs at the bottom... ?
I've been messing with the Claudio Scroller trying to get it working on an angle. Right now I've got it working but really buggy like and it has some issues. I got it working pretty much perfectly at the angle its set on right now in the fla, but I want it to be workable at any rotation without having to change any numbers.
ps - this is running flash 8 with as 2.0. the first file is for those with flash 8 the second file is for those with mx2004.
I'm using the dynamic scroller found on the kiropa site found here [URL]..In the action script on the ScrollBar, I can't find what variable to change to reset the position of the bar to the top of the scroller when I use the same dynamic text area for other content. It loads just fine, but if the scroller was left at the bottom, it stays there on the new text until you move it a bit, then the text catches up.
I'm hoping to find the variable and reset it when the new text loads.
Essentially what I'm trying to do is nearly the same as this: http:[url].......However I'd like to ease/tween the movieclip position and rotation to the mouse position.The main issue I see is trying to get the current movieclip rotation and the target rotation,then tween it cockwise or counterclockwise from current to target.The way a movieclips rotation uses positive and negative numbers throws it off.If you just want to lock the mc rotation to the mouse rotation its fine, but once you try to tween it you run into difficulties. So the end effect would be like if you were to draw imaginary clockwise circles around the object, it should just keep rotating clockwise towards the mouse. Then if you started going counter clockwise it should just keep easing counter clockwise to the mouse.
View 1 RepliesI'd like to ease/tween the movieclip position and rotation to the mouse position.The main issue I see is trying to get the current movieclip rotation and the target rotation, then tween it cockwise or counterclockwise from current to target. The way a movieclips rotation uses positive and negative numbers throws it off. If you just want to lock the mc rotation to the mouse rotation its fine, but once you try to tween it you run into difficulties. So the end effect im looking for would be like if you were to draw imaginary clockwise circles around the object, it should just keep rotating clockwise towards the mouse. Then if you started going counter clockwise it should just keep easing counter clockwise to the mouse.
View 3 RepliesI have an MC that contains a menu. Within the menu MC I have a little arrow movie clip that I would like to ease to the mouse position when clicked. I have this code on the little arrow, copied from many easing tutorials:
[Code]....
Also, I want the arrow MC to start at a particular place. But when I put _y = 30 (for example, which is where I would want it to start from) it is still at 0,0 - even when I change _y to this._y. What the heck?
I have a easy dummie code were I have a vertical scroll and i'm trying to change it to horizontal but I fail [code]....
View 1 RepliesI wrote a short AS program to create a tileList and it functions fine, but I need to be able to scroll the list of pics according to the position of the mouse with out actually moving the scroll bar.... example of what I mean: the farther to the right mouseX is on stage, the faster my tileList scrolls to the right, if mouseX moves to the left of the stage, so does the scroll bar...Here`s my code so far:
import flash.display.Sprite;import fl.controls.TileList;import fl.controls.ScrollBarDirection;import flash.text.TextFormat;
var tlc:TileList;[code]........
I'm trying to create a vertical auto scroll. The idea is to move up or down the image gallery when the user passes the mouse over a mask movie clip. Problem is I'm not sure how to determine the right coordenates form this movie clip. Let me explain, I can imaginary divide this movie clip in half. Top half let me move the gallery to the bottom and bottom half let me move the gallery to the top. It will be great if some easing could be added in the process.
View 5 RepliesI am trying to make a vertical mouse-sensitive scroll that I created a while back work going horizontally. You can see the one I created at [URL] and click on the "CUSTOM" link. I have been fiddling with the x and y coordinates but can seem to make it work. If I sent someone the FLA file, could you possibly help me make it work scrolling HORIZONTALLY?
View 1 RepliesI know this can't be to hard too achieve, but my actionscript skills aren't quite up to it yet.
- I have 5 frames within a MC.
- In this MC there is text saying "center", "left", "right", "up", "down" on each frame.
- All I want to be able to do is make the MC change to frame 3 "right" when my mouse moves to the right of the MC.
I know the script below is wrong, but would it go something like, this. Would I have to use angle and math or is there a simpler way to achieve this?
onClipEvent (mouseMove)
get x position
get y position[code]......
I have a button symbol on my stage that I want to change size depending on where the mouse is on stage. ie: the y position of the mouse will make the x and y scale change (the symbol should get smaller as the mouse moves up the page and larger as it moves down - as if it is getting closer or further away).
View 1 RepliesI know this can't be to hard too achieve, but my actionscript skills aren't quite up to it yet.
- I have 5 frames within a MC.
- In this MC there is text saying "center", "left", "right", "up", "down" on each frame.
- All I want to be able to do is make the MC change to frame 3 "right" when my mouse moves to the right of the MC.
onClipEvent (mouseMove)
get x position
get y position
if statement x= > -180 and y=> 0 (something like that)
_root.myMovieClip.gotoAndStop(3)
Does anyone know how I can adjust the speed of Cladio's scroll bar so when the arrows are clicked the scroll runs faster? Attached is Claudio's original file if needed. The speed variable has no effect on this? I tried adjusting the interval property of both the (up_btn and down_btn) to a lower number from "18" to "0" Like so...
[Code]...
This seemed to work when previewed in the player but once uploaded for some reason the scroll slowed down again? something to do with the frame rate? movie is set up at 30fps. Also, the content being scrolled is dynamically loaded via XML... Would this have anything to do with the lag?
I am trying to build a vertical slide scroller based on a tutorial for a horizontal slide scroller and am having difficulties undertanding what values I need to change in the code for the slider mc in order to make it work. The horizontal slider is quite smart [code]
View 3 RepliesI have created an animation which has frames with the head drawn in the various positions it needs to be in to look in all directions. Each frame is unique as it shows the head look up down sideways etc.What I need to do now is to make the movie clip play certain frames depending on the mouse position.I am having some trouble with the logic of how to do thisIs the best way to detect the mouse position then tell the movie clip to gotoandstop a certain frame depending on the mouse position?
View 2 RepliesI am trying to simulate a 3D navigation which changes the movement depending of the x and y mouse position.url...Does anyone know where I can find a tutorial step by step for it or something similar?
View 1 Replieshave a cool vertical scroller that I did try to convert to horizontal, but I could not make it work.
//code by Billy T
//set a variable
targY=0;
//set the x position of the dragger
dragger._x = 370;
[code]....
I would like to use it as a horizontal scroller for an image gallery. Just to clarify a horizontal dragger and a horizontal stage motion for image viewing.
fscommand("allowscale", "false");
bar.useHandCursor = dragger.useHandCursor=false;
space = 20;
[code]....
I have recently followed a tutorial to make a movieclip in flash that makes buttons spin around a point depending on the mouse position. I have made my own version off this and would like to use it in a full flash website that i am making at the moment.
The only problem that i am having is with aligning this clip and as it is made up of script i cant physicly drag it to were i want it. I understand how to alighn this with x/y positioning but when i preview the flash in a web browser it is positioned correctly but then when i 'full screen' the browser this clip jumps about 4 inches down the page.
This is a CS4 file so and I have CS5 so if you give me either it will be awesome
I have a movie clip that follows the mouse..
Its not done yet but its gonna be a dog chasing a/the mouse...
I want to have it where the if the mouse is left or right of the following movie clip it shows it walking toward the mouse... so something like
if mouse positions is less the the cursor + 10 (pixels) goto and play frame with dog walking left and one for right up down (I want this to walk till its directly under or over mouse and then laydown or jump only when over or under mouse..
(say its a 20 pixel wide object and 10 on each side will cover the whole thing and not just the exact center pixel, thats what the 10 + movie clip position is for, but Is there a way to tell it to goto and play whatever_frame when mouse is left of any graphic on the sitting dog section??? like the equivalent of onRollLeft or whatever.)
this is the code i have.. its the top statement that doesn't work the bottom 2 do..
Code:
if (_xmouse < detail.x+10) {detail.gotoAndPlay(61);
}
detail.onRollOver = function() {
detail.gotoAndPlay(31);
[Code].....
I already created the shapes and placed them in the appropriate frames.. you should only need to mess with the actions on the instance "detail" (the dog face in frame 1 of scene 1 in layer "follower" ---- just the actionscript needed for that instance is needed in the reply.. you should not need to chage any of the layers, but if you do just tell me what you did and why.
my fla is to big to upload to this form so im placing it on my website here
Its not done yet but its gonna be a dog chasing a/the mouse. I want to have it where the if the mouse is left or right of the following movie clip it shows it walking toward the mouse... so something like
if mouse positions is less the the cursor + 10 (pixels) goto and play frame with dog walking left
and one for rightup down(I want this to walk till its directly under or over mouse and then laydown or jump only when over or under mouse.. (say its a 20 pixel wide object and 10 on each side will cover the whole thing and not just the exact center pixel, thats what the 10 + movie clip position is for, but Is there a way to tell it to goto and play whatever_frame when mouse is left of any graphic on the sitting dog section???like the equivalent of onRollLeft or whatever.)
[Code]...
I am trying to build a vertical slide scroller based on a tutorial for a horizontal slide scroller and am having difficulties undertanding what values I need to change in the code for the slider mc in order to make it work. The horizontal slider is quite smart and there is additonal functionality attached to it to affect it's movement which I'm not too worried about although it would be nice)
Code:
// set up content_mc info
contentRight = _root.content_mc._x;
[code].....
I am looking for the a code to make my background image move horizontally both ways, when the mouse position is on the left or right of the screenDoes anyone know the Action Script 3 that is used?
View 3 RepliesI`ve been trying to make a scroll gallery depending on mouse movement, but I couldn't make it work.
Now, i found a script that works fine, but i have a problem at the beginning and at the end, because i can see a part of each image. If i put the mouse off stage, each one is shown enterily but when i tried to click them, i can see a small part of them.
I guess i should adjust the code, but i can't understand all the lines..
the code i founded on kirupa's forum is this one:
Code:
this.onMouseMove = function() {
constrainedMove(bg_mc, 4, 0);
};
[Code].....