Is there any AS to determine the size of the fullscreen playback? Usually I use;
fscommand("fullscreen", "true");
fscommand("allowscale", "true");
But I would like it play back at a particular size like 800 x 600 so the rest of the screen is just a border of the documents colour. Can this AS be adapted to do what I need?
I like to make a fullscreen desktop application, with an FLV, using the FLV Playback component. However, I�d like there to be a Fullscreen button on the playback component, which will allow the user to toggle the video fullscreen.I cant, for the life of me, figure out how to do this with various settings�it should be easy! This is what I have--is there a better way to do things (without a custom movie player)? My inital settings are as follows:
Code:
stage.displayState = StageDisplayState.FULL_SCREEN;
theMovie.fullScreenTakeOver = false;
Then I have a function which should work--but my button won't appear in fullscreen--Can I apply this function to the built-in fullscreen button?:
Code:
function handleClick(event:MouseEvent):void
{
if ( !theMovie.fullScreenTakeOver )[code]....
I have a list of fonts obtained via Font.enumerateFonts() and I want to display them all as 12 pixels tall. The problem is that I cannot simply set the point size because this can vary in actual pixel size for each font. So basically I want to determine what the correct point size is for a font in order to make it exactly 12 pixels tall. Because I'm doing this with a potentially large list I'm looking for an efficient method to do this.
View 1 RepliesI'm trying to accurately determine how many seconds of a video (NetStream) have been loaded so I can scrub/seek correctly. First I tried doing duration*(ns.bytesLoaded/ns.bytesTotal) but this is inaccurate by maybe 15%, ie if that calculation says 20 seconds is loaded and I scrub to 20 seconds ns.time will tell me it can't go past 17 seconds.
I think this is because the size of the file loaded doesn't map perfectly to the number of seconds loaded (obviously), ie as the video loads, some of the bytes loaded aren't the actual video but are overhead of the container/file the video is in. So to load 1% of video you have to actually load 1.15% of the file's size.
when i create an exe and i take it to fullscreen, my videos stop playing...and if yes how can i allow it to play my videos in fullscreen mode....
View 0 RepliesI have a swf file that is 7367KB. I would like to reduce the size of the file. How do I go about figuiring out the respective sizes of my movieclips?
View 2 RepliesIn Java, what is the best way to determine the size of an object?
In Actionscript I can usually just do:
var myVar:uint = 5;
getSize(myVar)
//outputs 4 bytes
How do I do this in Java?
Is there a way to take a compiled SWF file and figure out how much of it's size is used by code and how much is assets (images, etc)? I'd like to see if I can get my Flex SWF smaller but I'm unsure what's taking up the most space.
View 1 RepliesIn general, I haven't yet found a definitive way to get Flex and Spark containers to size themselves relative to their children. I have searched for good documentation for this concept many times but have yet to find anything that sufficiently explains the concepts. A simple example of something I often want to do is to draw a border uniformly around a set of controls. The goal here would be to have all UI elements to size themselves automatically.
<s:BorderContainer>
<s:HGroup>
<s:Label text="l1" />
<s:Label text="very long label 2" />
</s:HGroup>
</s:BorderContainer>
I would want the Labels to size themselves based on the text property, and the HGroup should be as big as needed to contain labels and BorderContainer should only just contain that HGroup. Now the more complicated example that I am working on now. I have a class that extends the BorderContainer. Within the class I create an HGroup with 5 Labels as children of the HGroup. Then the HGroup is added as a child of the ExtendedBorderContainer (using addElement() method).
Then the new class is used in the application as:
<mx:ViewStack>
<s:NavigatorContent>
<my:ExtendedBorderContainer />
</s:NavigatorContent>
<!-- more NavigatorContents here -->
</mx:ViewStack>
I have tried various [max|min]height/width combinations and I can not get the desired layout, which is very tight borders around elements without extraneous space starting from the deepest Label children all the way up to the NavigatorContent.
Each system - whether it is win, mac, or linux - displays (desktop) icons at a
user selected size (e.g., 16x16, 32x32, 48x48, etc.)How can I find which size is being used by the local system from within Flex or ActionScript3?
Here is my code that plays the video:
import fl.video.*; var myVideo:FLVPlayback = new FLVPlayback(); myVideo.source = "video.flv"; } addChild(myVideo);
How to I set the size of the video? I have tried "myVideo.videoWidth = 400;" but that gives me an error.
I am including a image on SWF file (using Flash CS4) i want images to keep its original dimension whether user fullscreen the SWF movie or play it on windows.
currently i do not have any action script or coding on my .fla file. when i publish the movie and fullscreen it, the image i put in fla file get all stretched out and blur.
Is there a way to determine the non-fullscreen maximum stage height/width? In other words, is there a way to pre-determine what the value of stage.stageHeight and stage.stageWidth will become before the user maximizes his browser?
View 2 Replieswhat kind of compression and image size should I use for a jpg fullscreen?What I am looking for is a balance between download speed and image quality.I know how to use the psd's save for the web options, but when get images at the size of a big resolution screen they quicly get heavy.
View 4 RepliesI'm currently making a website that i would like to be full size, whatever the resolution/window size is. Whenever i search for help i just get tutorials for fullscreen mode which is not what im looking for.
an example of what i'd like is this: [URL]
Whatever size you make the window - the flash file is stretched to fit.
I am working in a player and when am trying to make it fullscreen the scrubber and volume bar everything become too big in size.
View 1 Replies[URL]when you resize the browser window you'll notice that the background pattern remains the same size but there's never a browser-scrollbar, besides that the movie in the center that is loaded stays centered when resizing while keeping it's window-dimension constant (it's actually 2 seperate movies forming the center window).
View 6 RepliesI've made a flash application using actionscript 3, I wanted this application size to be dynamic, To be able to embed it in any size and let it adjust itself accordingly. I managed to accomplish this, theres a problem though: The original width of the application is 700 pixels. I'm embedding the flash in a smaller size, (400 for example) going to full screen, and when I exit, the application sets itself back to being 700 pixels wide, and isn't adjusting itself to the 400px width of the actual embedding area..
[Code]..
I have a movie that opens up full screen and load an external movie into it. No problem there but I want the loaded movie to keep its original size and not resize with the full screen movie. In the screenshot, you see how the yellow external movie loads into the fullscreen green movie. The white rectangle is only for size reference (photoshopped it in) and is not in the actual flash movies. The yellow movie is supposed to be 800x125 pixels but resizes with the fullscreen of the green movie.
View 1 RepliesI need a fullscreen scroll bar on my fullscreen flash site , i need it to function similar to this URL...
View 1 RepliesI have a swf inside a html page. If I open it with IE or FF and put it into full screen I can exit full screen with the ESC button.Now if i try this with my WinForms app and WebBrowser (or ShockWave Flash Object) it's not working??
View 3 RepliesWhat I've done is created a "fullscreen SWF" by using ActionScript to stretch a movie clip (yellow rectangle) in the background to fill the whole browser frame. The navigation is positioned in the upper left using ActionScript also; when the user resizes the window, positions are adjusted so the nav always stays in the upper left. (Adapting the technique from http:[url]....
External SWFs are loaded from an XML file into a blank movie clip on a layer that is between the yellow background and the navigation (adapting the kirupa XML Photo Gallery). Here's my problem: I want to be able to create full screen backgrounds for these external SWFs so when they are loaded into the main SWF they cover up all the of yellow background of the main clip. Also if the user resizes the window, I hope like the main SWF, the background on the external SWF can also resize to match.
If you press next twice to get to item three for example, I want to be able to stretch that orange box to fill the entire background. You'll notice if you resize the window on the third item, the orangle rectangle will adjust, it's just not correct.
I'm hoping someone can help me with an issue I'm having.
I currently have an AIR Application that runs fullscreen.
At some point in the application, I am trying to get a video to play fullscreen as well.
[Code]...
I'm making a flash site, and i want it to load full browser with a "fullscreen"-button to go fullscreen. The problem, however, if i resize, the site will keep the same width-to-height ratio...But if i'm testing it using the flash debugger, everything resizes just correct...My html:
HTML Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">[code]......
i have my photo gallery and if you push a button photo has to open in new window with fullscreen.
for fullscreen i use Stage.displayState = "fullScreen";
So ive been asked to build a page for a real state company and the guy told me it should be similar to these [URL] Ive been trying a couple of weeks so far, but i dont seem to find a way to do somthing similar, i mean, i want to have the welcome screen as those two:
- the gradient background
- flash occupies whole screen no matter what size it is
- gradient expands sideways infinately
- no matter what height my explorer window is, gradient is always in the same position relative to top, and if i keep expanding downwards the background keeps last colour of the gradient.
- the brand logo looks as if it had top, left and right anchors, and it also limitates the minimum width of the explorer window
i though of addind a 3000 x 3000px square with the gradient and centering it, but i know there has to be a professional way of achieving that.
I am trying to build a flash that auto-adjust its size to the browser window size, while leaving the content of the flash itself top-centered in the screen.I have found this solution [URL].. on How to keep centered stuff in this exact case so i am pretty confident i will be able to adjust that script to do what i want.
Now my problem is that if i put my content inside the movie-clip (centerrectangle) with all the animation require, link and other stuff, the movieclip (center rectangle ) never have the exact same center, thus making the script go wild trying to always adjust the location to the variable size of the movie clip.
[Code]...
I am trying to build a flash that auto-adjust its size to the browser window size, while leaving the content of the flash itself top-centered in the screen.
I have found this solution [url].. on How to keep centered stuff in this exact case so i am pretty confident i will be able to adjust that script to do what i want.
Now my problem is that if i put my content inside the movie-clip (centerrectangle) with all the animation require, link and other stuff, the movieclip (center rectangle ) never have the exact same center, thus making the script go wild trying to always adjust the location to the variable size of the movie clip...
I need it to stay exactly at the same position whatever the size of the movie-clip. [code]...
I made a preloader for my single scene movie and although the preloader is about 16k, when placed into frame 1 of the movie and tested, the frame is shown to have about 256k, which is larger than the movie it's loading. I've gone through all the files and made sure that export in frame 1 is not checked and made sure the publish settings also are set to export in frame 1.
View 5 RepliesI would like to know how to make flash size (width and height) full size in the browser? the real size of flash is w:955px h:600px I tried to make w:100% and h:100%, it makes pictures pixelate.
View 6 Replies