In Java, what is the best way to determine the size of an object?
In Actionscript I can usually just do:
var myVar:uint = 5;
getSize(myVar)
//outputs 4 bytes
How do I do this in Java?
I tried with flex and java in the backend. In this, I am able to upload files till 100 MB using remote object (blazeDs) where we will read the file as byte array and send it to the java method. If the file size exceeds after that, then I get the run time error in IE.
View 1 RepliesI have a list of fonts obtained via Font.enumerateFonts() and I want to display them all as 12 pixels tall. The problem is that I cannot simply set the point size because this can vary in actual pixel size for each font. So basically I want to determine what the correct point size is for a font in order to make it exactly 12 pixels tall. Because I'm doing this with a potentially large list I'm looking for an efficient method to do this.
View 1 RepliesAssume I have the following java class public class Square {
[Code]...
Inside an actionscript class, using RemoteObject, I invoke the java method SquareDAO.findById(Long id) an I get an Object with the following: But I don't get the area. How can I invoke the method getArea() ?
I have a swf file that is 7367KB. I would like to reduce the size of the file. How do I go about figuiring out the respective sizes of my movieclips?
View 2 RepliesIs there a way to take a compiled SWF file and figure out how much of it's size is used by code and how much is assets (images, etc)? I'd like to see if I can get my Flex SWF smaller but I'm unsure what's taking up the most space.
View 1 RepliesIn general, I haven't yet found a definitive way to get Flex and Spark containers to size themselves relative to their children. I have searched for good documentation for this concept many times but have yet to find anything that sufficiently explains the concepts. A simple example of something I often want to do is to draw a border uniformly around a set of controls. The goal here would be to have all UI elements to size themselves automatically.
<s:BorderContainer>
<s:HGroup>
<s:Label text="l1" />
<s:Label text="very long label 2" />
</s:HGroup>
</s:BorderContainer>
I would want the Labels to size themselves based on the text property, and the HGroup should be as big as needed to contain labels and BorderContainer should only just contain that HGroup. Now the more complicated example that I am working on now. I have a class that extends the BorderContainer. Within the class I create an HGroup with 5 Labels as children of the HGroup. Then the HGroup is added as a child of the ExtendedBorderContainer (using addElement() method).
Then the new class is used in the application as:
<mx:ViewStack>
<s:NavigatorContent>
<my:ExtendedBorderContainer />
</s:NavigatorContent>
<!-- more NavigatorContents here -->
</mx:ViewStack>
I have tried various [max|min]height/width combinations and I can not get the desired layout, which is very tight borders around elements without extraneous space starting from the deepest Label children all the way up to the NavigatorContent.
Is there any AS to determine the size of the fullscreen playback? Usually I use;
fscommand("fullscreen", "true");
fscommand("allowscale", "true");
But I would like it play back at a particular size like 800 x 600 so the rest of the screen is just a border of the documents colour. Can this AS be adapted to do what I need?
Each system - whether it is win, mac, or linux - displays (desktop) icons at a
user selected size (e.g., 16x16, 32x32, 48x48, etc.)How can I find which size is being used by the local system from within Flex or ActionScript3?
Executing one of the ant tasks, which launches mxmlc (which in turn uses JVM). I am getting the following output:
build-swf:
[exec] Current OS is Linux
[exec] Executing '/usr/local/flex_sdk_3/bin/mxmlc' with arguments:
[exec] '/home/user/dev/branch/flash/FLA/layer.as'[code]......
By googling on the error message, I've realized that the heap size for the jvm was not set correctly. Tried to examine my environment variables by grep-ing "384" or "java" but got nothing. Where are those parameters taken from?
I am trying to create a button that when clicked will open a webpage with a pre-determined size. This is my code now that works without Java:
[Code]....
but I can't seem to figure out how to add this and make it all work:
[Code]....
how to determine if there's a dragged object. Is there a way to do this?
I know if you start another drag on the other object it will stop the current dragged object. Maybe there's a public function that will query about this?
i have a class called "Ball" that extends "AllSprites" which is a class that extends "Sprite". there is an addChild within the "Ball" class that adds a Sprite to the stage. when i run it like this, it successfully adds the object to the stage.
in my Main class i have
Code:
var ballOne:Ball = new Ball();
i am trying to get the x and y value of ballOne from within my Main class but if i try to do
Code:
trace(ballOne.x);
i get an error:
1119: Access of possibly undefined property x through a reference with static type Ball.
how do i tell my code that the ballOne is a Sprite so i can get the x and y values?
also not working:
Code:
trace(Sprite(ballOne.x));
What is the simplest way to determine absolute object coordinates in AS3?
View 1 RepliesAny command to check whether an object is currently present in the Display List? I have a TextField called _startHereText. I have some logic where I need to sometimes use RemoveChild to take this object out of the Display List, but I first need to determine if it is presently there.
View 9 RepliesHow can I get the X, Y, and rotation values, relative to the stage of a child of unknown number of parents?
What I am doing is: I have a 'stick' object, that creates a child 'stick', that creates a child 'stick', etc a random number of times.
The end stick then creates a leaf.
Each new stick rotates a little bit randomly.
As a result when my leaf falls off the final stick it flies off in a strange direction.
How can I get the leaf to fall down (eg y++ relative to stage)?
Alternatively I thought I could dispatch an event that has a leaf created at the stage level but then I really need to know what the X and Y co-ordinates of my final stick is realtive to the stage.
I have this bit of code, and it's not working as I expected. btnContainer is a VBox that contains a ton of buttons (toggle=true); and I want to reset them to un-toggled at a certain point.
for (var btn:Object in btnContainer.getChildren()){
if (btn.isPrototypeOf(mx.controls.Button)){
btn.selected = false;
}
}
With the above code, "btn" shows up as just the index during each iteration of the loop (0,1,2,3,...), and the conditional never evaluates to true.I also tried this:
for (var btn:Button in btnContainer.getChildren()){
btn.selected = false;
}
This works fine, except that there is also a label inside btnContainer; so it throws an error when trying to cast the label as a button.
Is it possible to use JavaScript to detect whether a .swf file has loaded completely within a web page?Assume that the .swf file is pulled from a 3rd-party website and we don't have access to its source code.
View 2 RepliesHow can I get the X, Y, and rotation values, relative to the stage of a child of unknown number of parents?What I am doing is: I have a 'stick' object, that creates a child 'stick', that creates a child 'stick', etc a random number of times.The end stick then creates a leaf. Each new stick rotates a little bit randomly.As a result when my leaf falls off the final stick it flies off in a strange direction.How can I get the leaf to fall down (eg y++ relative to stage)?Alternatively I thought I could dispatch an event that has a leaf created at the stage level but then I really need to know what the X and Y co-ordinates of my final stick is realtive to the stage.
View 0 RepliesIs there a way to determine the current position of the pen in a graphics display object. Something similar to what is discussed in this thread but for AS3?
View 4 RepliesThis is probably a silly question buy how do I find out if an Actionscript Object is just an Object ,but NOT any subclass IE String bool etc?[code]...
View 1 RepliesI'm trying to place a displayobject at the bottom of the stage with scale mode set to exact fit. stageHeight returns the actual height in pixels, but the stage scaleY still returns 1.Isn't there a simple way to determine the original height for object placement?
View 6 RepliesI have loaded swf with an object 'Page'. A 'Page' object is created and a reference to it is added to an array 'pa'.
I have a 2nd loaded swf that then has a reference to the 'pa' array (I don't think this matters but I mention it just in case)
I want to cycle through the array and determine when I get to a Page object. Where I run into problems is trying to compile the class that does this.
Code:
private function CH(e:MouseEvent):void
{
trace(pa);//[object Image],[object Page],[object Blue],[object Red],[object Mask]
[Code]....
In Actionscript 3 is there any way to determine the precise display object hierarchy an event will traverse through when dispatched from a given object? The object is not necessarily a display object.Although I could imagine this actually being useful somehow, in my particular case it is a learning exercise. I'm trying to master the event system in flash and have some locations where I'm very curious what path an event will take when I dispatch it.
View 2 RepliesI'm trying to get an object to increase in size the lower it goes down the stage, and decrease in size the high it moves up the stage.
It only needs to increase or decrease by a small amount. Basically, it's for a game character. To ad realism to his movements, it would be nice to have this feature.
This is where i'm up to so far:
Code:
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
[code]....
I think I need something like:
if (object moves up)
decrease
else if (object moves down)
increase
The coding language is Java.I have a ByteArray embedded in ActionScriptObject.(Smartfox Server)I want to convert it into ByteArray.The idea is to save it as an image.This a sequel to the post --> Convert Byte Array from Action Script to Image in Java and save it
View 2 RepliesFrom java i am sending ordered Map.In flex when i convert that into Object i am loosing the order which i maintained in java.Is there any other way to maintain the order in flex object?
View 1 RepliesSelect a school listed in the first datagrid, and display all the student records /details of that school in the next datagrid. But, since datagrid is editable and requirement mentions : "Use a Wrapper class around the object to get the data, set the same and save. Ensure wrapper is bindable to take into consideration the updates being made to datagrid text fields."
I have an object which is a type of a Data Access Objects i.e. DO.
mySchool:mySchoolDO.
The mySchoolDO is an actionScript class of following code :
public class mySchoolDO
{
public var schoolName:String;
public var schoolLocation:String;
[code]....
The showSchoolStudents will display all the details of students on to the datagrid. But, my datagrid is editable. And, I want to use WRAPPER CLASS around this object such that
a> I can retrieve individual values as present in studentsDO i.e. studentID, studentCourses, studentGender, studentPhone.
b> I shouldbe able to set the values as they are updated in the visual datagrid.
c> Finally save all the data and submit on submit click.
Is it possible to play a Flash object/file into a jframe < netbeans > / any java application ?
View 1 RepliesI'm building an application using Flex 4 + Spring Blazeds Integration 1.5 + Spring 3.0.5 + Hibernate running on jboss-5.1.0.GA. I create a simple login form, and when a submit a string via remote object it works fine. But when a try to use an Object its simple doesn't work. Funny is that it even don't shows the Alert that a put! Also, if I remove the tag "RemoteClass" it sends to java but an error occur. Bellow is the code and configs.
My java class:
package com.controlefinanceiro.entities;
// imports
@Entity
[Code]....