i am working on a video recording project in ActionScript-2, i want to add a script with my code to detect camera or microphone disconnection. it means if user disconnect camera or microphone in between recording, i want to give him a warning.
View 1 Repliesi am working on a video recording project in ActionScript-2, i want to add a script with my code to detect camera or microphone disconnection. it means if user disconnect camera or microphone in between recording, i want to give him a warning.
View 12 RepliesI am developing an application running in Flash Player. The applicatiosn requestes access to the camera and/or microphone available on user computer.Is there a way in the application I prevent users from seeing this question? i.e. without having user to change his/her Adobe Flash Player setting?
View 1 RepliesHow do i disable the flash prompt that comes for microphone and camera access.
View 2 Replieshow to remove flash player security pop up for camera and microphone through coding.
View 4 RepliesWhen an Adobe Flash program accesses a camera or microphone in Adobe Flash, Adobe pops up a panel to the user if they want to Allow or Deny access. If the user clicks Deny, I would like to pop the same panel back up. However, trying to access a microphone or camera again doesn't seem to do it.
I know there's Security.showSettings(SecurityPanel.PRIVACY), but this is a slightly different popup which has a "Remember" option which I explicitly do not want.
Is there a way to repeatedly popup the Allow/Deny confirmation without the Remember option?
I'm setting up an application where I need to record users' voice every so often during the course of the users' interaction with the application. Recording is fine, and the quality is fine, but now my issue is understandng how Flash handles the microphone when it gets attached to a stream for publishing.Basically, the problem is that when I "publish" my stream, the voice gets cut off (clipped) at the beginning. So, I initially thought this may have to do with buffer settings on the FMS server side, but it wasn't. Then I investigated client side stuff. For some reason, my internal mic .activityLevel property is -1 even though I have called Microphone.getMicrophone(). According to Flash's documentation, this shouldn't be the case:
activityLevel propertyactivityLevel:Number [read-only]Language Version : ActionScript 3.0Player Version : Flash Player 9The amount of sound the microphone is detecting. Values range from 0 (no sound is detected) to 100 (very loud sound is detected). The value of this property can help you determine a good value to pass to the Microphone.setSilenceLevel() method.If the microphone is available but is not yet being used because Microphone.getMicrophone() has not been called, this property is set to -1.I am using a timer to investigate the microphone .activityLevel property every 50 milliseconds:
package
{
import fl.controls.Button;
import fl.controls.TextInput;[code].....
1. The basic problem I would like to solve is detecting when a connection to the Flash Media Server fails.Our client-side application establishes a persistent NetConnection and publishes a number of video/audio streams to the FMS.After publishing some videos, some clients find that recording no longer works. I need to add code to let them know that there's a connection problem. I've studied the NetConnection class and can't find an built-in method that can help alert the user if the connection is broken.
2. Also, I'm having trouble tracking these events in the FMS logs. Are there any key statements I should look for that would tell me if the FMS has experienced a sudden loss of connectivity with a client?I was thinking of using the onAppShutdown (?) event to detect when an application closes normally, so I can then get an idea of when it's closed down in other circumstances.
How can the disconnection or Closure of the flash client be detected while using a php backend which ensures that only active client usernames are present in the datbase. My approaches were to use some polling method - where the client sends some message to the server periodically else the server deletes the client's name from the DB assuming it is closed - or to use some augmenting javascript code that informs the backend of a closure event.
View 1 RepliesI have a FMS application that contains a chat room. I'm finding that my on disconnect method is firing randomly when I still haven't disconnected. I've gathered from various other forums that this is a pretty common issue.
View 2 RepliesI am capturing camera on flex for android using air 3.1,and found that the camera is only showing the a part of of actual camera video.When i view camera using normal camera application in android galaxy tab, it shows full camera area but when i am capturing the camera in flex its showing only the center area for it.I tried using setMode to set the resolution, but its not of any use.Is there any way to get full camera area captured inside flex using camera.getCamera ?
View 1 RepliesFrom a Flash object, I would like to be able to detect the presence of a webcam that the user might grant access to, without actually asking the user whether they want to grant access. This is to streamline a large application that has extra features if a webcam exists — if there is a webcam, the application will present several dialogs that lead up to the normal cam-security prompt, but if the user doesn't have the hardware, I want to skip over them altogether. Requesting access to the cam before those dialogs won't make sense to the user.
It appears not to be possible to call Camera.getCamera() without the security prompt happening. Is there a workaround? (For instance, could I, perhaps, call getCamera in a hidden Flash object and inspect its return value, or does it block until the user acknowledges the security prompt?)
I have a video capture device on a machine. I have written a windows application to capture the video from this device. While capturing, if i try to broadcast using flash it does not connect. If i'm already broadcasting and then try to capture then my windows application does not get the capture pin of the device. So, flash seems to be taking the capture pin. Is there anyway to broadcast using the preview pin on the device so that i can capture using my application. Or is there way where i can split the capture pin and give one to my app and one to the broadcaster
View 10 RepliesUsually Adobe Flash applications can access any usb-webcam.I have a USB camera for microscopes which understands TWAIN and DirectShow.Is there a possibility to access the video data from this camera with flash?
View 1 RepliesI'm trying to make a Flex-based desktop application consume messages from an ActiveMQ topic with a durable subscription, using the JMS bridge of BlazeDS. The basic scenario is as follows: Messages are produced by other producers in the topic to which the Flex client is subscribed. The Flex client may go offline from time to time, but it must receive all the messages it has missed while being offline when it connects to BlazeDS again. (Of course the Flex client connects with the same client ID every time). It can not be guaranteed that the Flex client is shut down gracefully.
Everything works fine if I explicitly disconnect my consumer on the Flex side by calling disconnect() - I do it in the exit handler of the application. However, due to #3 above, it is not guaranteed that disconnect() is called all the time. When the Flex client shuts down without calling disconnect(), it seems that the subscription of the "proxy JMS client" that BlazeDS creates and associates to the Flex client stays active towards ActiveMQ, so ActiveMQ still thinks that the client is logged in. When the Flex app starts up the next time, it is unable to log in to BlazeDS because ActiveMQ refuses its subscription, claiming that the client ID is already taken. Why is it so and what can I do here to ensure that BlazeDS makes the "proxy JMS client" offline in ActiveMQ when its real Flex counterpart terminates unexpectedly?
More detailed information: some debugging revealed that:
[Code]...
It appears that if one has a mic available, then one can add an event listener for the StatusEvent. However, this only tells you if the mic has been allowed or disallowed.
What I'd really like to do is detect if the static Microphone.names property changes. I would have expected this property to be bindable.
If I right click and select "settings" immediately after plugging in a mic, I can see that flash has updated their list of available microphones. However, there seems to be no way in code for me to receive the same update.
The docs say "Calling Microphone.names requires an extensive examination of the hardware, and it may take several seconds to build the array." So I think polling this every few seconds is not a feasible option.
Works, but if i set LoopBack to false it doesnt work!!!i dont want to listen to me, i only want to know when the mic hear something.
import flash,events.ActivityEvent;
import flash,events.StatusEvent;
import flash.media.Microphone;
[code]......
I was wondering if there is any way to get the sound bytes froma microphone and apply it to lee brimelow's tutorial on sond spectrum?[url]...
View 4 Replieshow can i mute microphone using AS3?
View 2 Repliescan i mute MICROPHONE sound using AS3?
View 1 RepliesWe are working on a project to record a sound a we need to play back in flash 8 (as 2.0). we have 3 buttons like play /pause, record, stop, When we clik on record button we can record the sound through microphone and when we clik on paly /pause button the recorded sound should be played. so can we record and can we play back in flash 8.
View 2 Repliesit's possible to check at runtime the default microphone used by application without use the manager panel? I have tried to make a timer but doesn't work without open the manager panel.
View 3 RepliesI have an application with microphone record and i mix another sound from song. For this step is ok i can save to my desktop and the mix is good.But i would like to play my mix from bytearray.The sound is very slow....... and not same that my file save,My code:
var epos:Number=0
//ByteArray in which the microphone sound data is stored
var soundBytes:ByteArray = new ByteArray();[code].......
I want to check whether the microphone is connected to the system or not. If not, it should display a warning message and not allowed to record anything. All this should be done through actionscript3.0.
View 3 RepliesIt is possible to convert microphone data into AMR based data?
View 1 RepliesHow do you call the microphone built into a computer to turn on when a user visits a site? I've heard that there a number of different ways to do so, but I'd like some advice on the best way.
To provide a meta-level view, I'm planning on having the mic pick up noise and display it as a graphic equalizer (of sorts) but not record it.
Is there a possible way to access the computer microphone from a web document (open in a browser) without have to go through Adobe Flash ?
View 1 RepliesI am looking for advice how to set web pages where user can interact with it using microphone. The aim would be that user can say word and the word would be recorder and the file compared on server with another sound (word) and then the result (the searched word) would be displayed. It would be a spoken dictionary.
View 2 RepliesI saw a lot of issues about using Microphone in Flash on Android on the Internet. But my own flash applet does not work, saying "mic not detected". Also there is a note in AS3 reference, that Microphone class is not supported on any mobile device.
View 1 RepliesI am a newbie to this Flash Segment. Though for my recent project i am diving into it. I want to make "A Flash app which will Capture user voice from microphone. It can be appended if paused. After recording done i want to upload the file to the server. so that i can play it back when required." I tried this with java applet but the UI is too bad so i am thinking in respect to flash. What i found till now is for this i have to go for Flash Media Server which is not possible in my project. I want a simple player. You guys rocks that i can easily understand after some wondering in this forum but did not get my solution so thought of posting it.
View 1 Replies