I have a small issue in ActionScript 2.0. I want to know the stage width and height for external SWF file. I used the following code:
var loader:MovieClip = _root.createEmptyMovieClip('loader', 1);
var obj:Object = new Object();
var mcl:MovieClipLoader = new MovieClipLoader();
[code].......
I have a small issue in ActionScript 2.0. I want to know the stage width and height for external SWF file. I used the following code:
var loader:MovieClip = _root.createEmptyMovieClip('loader', 1);var obj:Object = new Object();var mcl:MovieClipLoader = new MovieClipLoader();mcl.loadClip("external.swf",loader);mcl.addListener(obj);
obj.onLoadInit = function(mc){ trace(mc._width); trace(mc._height);};
It's showing the whole animation's width and height but I want only stage width & height?
I would like to use a movieclip to load a flv video. The problem I have is that I want to change the video dimensions. I've tried several software to change the video dimensions but as far as it seems all of them keep the same height-width ratio than in the original video. Is there any software that would allow me to change the height and width without keeping the same height/width ratio as in the original video file?
View 3 RepliesI am trying to reference to top level (stage) width and height of the main stage for the placement of something located inside a movieclip on the stage.
My code is:
Code:
my_loader.x = (stage.stageWidth - my_loader.width)/2;
my_loader.y = (stage.stageHeight - my_loader.height)/2;
But this seems to just relate to the width/height of the mc that my_loader is nested in...
I have tried the following and had no luck:
stage.stage.stageWidth
root.stage.stageWidth
parent.stage.stageWidth
MovieClip(root).stage.stageWidth
i want to load external images of different height and width into same height and width.
View 3 Repliesi want to load external images of different height and width into same height and width.
View 0 RepliesI would like to use a movieclip to load a flv video. The problem I have is that I want to change the video dimensions. I've tried several software to change the video dimensions but as far as it seems all of them keep the same height-width ratio than in the original video. Is there any software that would allow me to change the height and width without keeping the same height/width ratio as in the original video file?
View 1 RepliesThe template is built under Flash and has .swf, .fla and html files and was setup on an html background. To make things look nice I decided to use an XML web template as a background to his template. The problem starts from there.The XML web template allows us to add our own SWF files, so I decided to add the swf file of my friend's template.
The swf file was set to "noscale" and when I imported it into the web template it didn't fit properly. So I took the "noscale" off from the actionscript and imported it again. Even then the scaling of the swf file was not correct.As soon as you load the file, it scales towards the left and not center.My question is how can I write a code within the fla file so that when the swf file is loaded it automatically centers itself?2nd question is how can I setup the dimensions of the file as in terms of height and width of the file without getting it cropped. I tried to set it up from 840x610 to 650x430 however the swf content got chopped off (even with noscale off).
I am trying to increase a swf file height and width so it can fit better in my screen. I don't want to rework on everything again in my fla file because it's big hassle. (changing background size makes every symbol off). Are there anyway to do it?
View 3 RepliesIn the following code Only the button image has been embeded into the flex code. But in the html object or embed tag why the height and width has to be specified. Even though for this is a normal button if we do not specify the height and width there seems to be some error
HTML
<div align="center"><br />
<div style="display:block;width:100px;height:100px;" id="audio"
class="testsound" align="center"/>
<p class="clickable">
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="400" height="100" id="myMovieName">
[Code] .....
URL...I'm onto the next step on the AS code (see attached zip file on this thread if you need it - file Untitled-3.fla), trying to get the AS to fill an 800*600px window with the dots when the FLA is run.I have tried a range of things, like this (i.e. adding in the hard coded 800 and 600 into the code:[code]But it doesn't do any good!I can't see any other parts in the AS code where the width and height are defined.
View 1 RepliesI am loading an external swf file using the following code:
//add close button
var reqButton:URLRequest = new URLRequest(btn_close);
var loader2:Loader = new Loader();
loader2.load(reqButton);
addChild(loader2);
[Code] .....
Once the loader loads my image, and I click on it, nothing is happening. Am I supposed to be adding the EventListener to the loader or something else? How can I detect the height and width of the swf file in the loader?
I am trying to load an external swf file. The swf width and height is small and I want to enlarge it when loading it. (My scene has large width and height). My current code could load the file but I am not sure how to enlarge the swf width and height.
var request:URLRequest = new URLRequest("index.swf");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
Is there a way to know the original width and height of an swf file with java ?
int width, height;
// my stream contains an image or a swf file
InputStream stream = file.getInputStream();
// mediaType has been set with the help of file extension
switch (mediaType)
[Code]...
I have loaded in an external swf file and it works fine.
However, when I get the width dimensions of the movieclip that is housing the external swf file it gives me a '0' for the width.
I use a fileReference.browse() to select an image file from the harddrive.
How can I check the Width and Height of the selected image file?
My Stage size is 126*62. (it's a small animation).- When I publish the .SWF, no problem.- When I publish a projector .EXE file for windows, then, the width is still correct, but the height is higher than 62 : I got two small white bands beside top and bottom of my stage,see ?I don't understand why there's such a difference between publishing a SWF or EXE. And I'm afraid this also happens whatever the Stage size is (small or big, I mean) : you always get these blank bands on the top and the bottom, don't you ?
View 1 RepliesI am looking at the SimpleButton entirely wrong. Here's what I'm doing (inside of a MovieClip):
[Code]...
the close_btn.width and height remain 0. Am I supposed to just rely on the DisplayObject members of the SimpleButton completely and ignore width/height/x/y or what?
I have a flash banner graphic that I created at 1000px wide by 420px tall. I want this to be fluid and fill the browser width, so that when the browser is rescaled the swf fills the horizontal space. My problem is that there is content below it that needs to touch it, but the height is trying to fill 100% so it is creating vertical space between the flash content and the div below it.
I guess a better way to describe it is that I don't want to define the height I just want the width to be 100%. At 100% height there is unused space so I need to make the height maybe undefined or something smaller then 100%?Also, if you make the browser too small vertically the width will not fill. So I want 100% width regardless of the browser height.
How do I set the width and height of my swf in AS3?
This is my code so far:
package {
import flash.display.Sprite;
public class Game extends Sprite {
}
}
Right now, when loaded it is at some arbitrary default size.
If I can't change the size this way, is there any easy work around that will be consistent?
my .swf goes full screen and changes proportion if it is accessed directly at it's url
[URL]
is it possible to tell how big it currently is? i'd like to reposition some elements accordingly...
I'm trying to change the position of a movieclip I've added to the stage. When I try to access stage.width or stage.height I get 0. I've tried MovieClip(root).stage, DisplayObject(root).stage, root.stage, stage, and simply width and height. All of these are equal to zero.
View 1 RepliesI want to write a shell that creates instances of an app and scales it down for animating. Well, I created my shell class and instanced the app and set scales for x and y and then I traced the height and width because I wasn't sure what they'd be. I thought they'd be based on the stuff on the stage or whatever, but they both came up zero. So I'm not sure how that works, am I supposed to have set those values?
[Code]....
I have an empty movieclip in the stage that holds a backgroundbg._width = Stage.width;bg._height = Stage.height;the background is loaded from XML and works fine since I'm not set the width and heightbut if I set: bg._width = Stage.width and bg._height = Stage.height
View 1 RepliesI have two Canvas A and B, A is the child of B.A can be resized by some user actions like adding some UI components to its base.A is bounded by an other Parent canvas B which should show scolling handles if its child A gets too large.I would like A to have the same width and height of B (or really close) while the calculated width and height of A is smaller than those of B.If w or h of A get larger than those of B then A should grow and B will show scrolling.
View 2 RepliesI am using jPlayer library but i don't know how to set width and height[code]...
View 4 RepliesI'm a student for design and want to build myself a portfolio, showing pictures and being able to jump between fit_to_screen mode to actual_pixel_size mode. The following code is just the beginning.
I've wrote the code mixing some tutorials (sorry, but I didn't find a good way to clean it so it'll be more focused) - I'm a really new about action script.
myFile is a mc waiting for an external parameter run_url - a string contains something like "/projects/illustration/alice_in_wonderland.jpg"
You can see the trace command marked as red. I'd expect it to give me a number of the movie clip's width, yet i get "undefined"
import mx.utils.Delegate;
var streamingID:Number;
var fileLoaded:Boolean;
[Code].....
Is there any possibility to change screen width and height not in Flash ( in Properties ), but in Code [ any AS3 line? ].
View 1 RepliesI was wondering if there was a way to set an air app to fill 100% width and 100% height of the screen?
I know how to do it on the web by setting swf address parameters to 100% and setting stage.scalemode and stage.align
I am using FDT to publish my air package with an ANT build. So it does not use mxml, just my document .as class.
How can I use the width and height that's set by the object's embed code within my Flash movie?
I've got items that position based on stage height/width. Problem is although the object appears re-sized when you adjust the values in the embed, the stage size obviously does not change.
Ideally I'd like to position and scale objects based on the dimensions provided in the embed.