I have a fla wherein when I Roll Over on the respective regions some text and images are displayed in the respective position ( text loaded in a dynamic text field). Now all these info are from XML file. I want to format it but have no idea how to do this one. I like to make it underline, want to make some paragraph , like to make some text bold and so on ...........
[code]...
Im trying to get a movieClip to change its tint on roll over and back to normal on roll out. But this has to happen gradually like a tween. Im trying to use the code for alpha tween but its not exectly i also tried the tweenlite but im to confused :S here is my code:
[Code]...
I want to create a button that toggles but has a roll over, roll out and click animation. Anyone willing to point me in the direction I need to be so that I can achieve this. I can create the roll over and roll out animation for the buttons but then how could I toggle between the two buttons. Ultimately this is for a start and stop situation. I want when I roll over the button for it to have a transition then click and it toggles to the alternate button with animation. I have been tackling this now for a week and with no success. So far I have found ways to toggle but loose the animation or vice verse.
View 4 Repliesi've been trying to code a small variation into the normal roll over roll out animations... i want the animation to stay on the last frame once i click the button. but when i put the code in it dosent even bother playing the rollover/out animations it just goes to the end frame...
Code:
stop();
this.onEnterFrame = function(){
if(rewind == true){
prevFrame();
[code]....
So I have a menu that fades in on a movie clip rollover. It fades out when the mouse rolls out over a 'hit area' mc. All is working fine except when you move fast off the hit area. Sometimes the fade in menu remains up when the mouse should have traveled over the hit area and told it to fade out... any reccomendations to remedy this?
View 3 RepliesButton class:
[Code]...
The Roll Over and Roll Out State isn't working.
make a roll over and roll out? with roll out appear image and with roll over disable
[Code]...
I have MovieClip A on stage, that when the user rolls over it another MovieClip (B) is added above it to the stage (it's not added as a child of Movieclip A). Now, when the user rolls over this newly added clip, it triggers the roll out event of the clip 'below' it. So, how can I prevent this from happening ?Basically, it's a movieclip that displays a button when rolled over and hides it when rolled out. I need the roll out NOT to be triggered when the user rolls over movieclip B.
View 6 RepliesI just want to design a button when the mouse roll over the button will gradually become larger (to a fixed size) and gradually comes to the originally size when roll out. I try to use "Adding Buttons to Movie Clips" method, ie, one MC with two layers, an amimation MC (tween from small to big and then big to small) and a button. Add script as follows:
on the first frame:
if (Playing eq "True") {
play ();
} else {[code]....
When I roll over the MC tween small to big and big to small and when roll out the MC gradually small. What I want is when I roll over the MC tween small to big and keep it is except when I roll out.
I have a graphic that when rolled over it starts a movie clip, when rolled out or off I would like the clip to instead of stop actually roll the movie back whether the clip is at the end or not. Like an animated button I would guess.
View 1 Replieson (rollOver) { gotoAndPlay(2);}on (releaseOutside, rollOut) { gotoAndPlay(11);}
i am using this this scrip in flash 8 scrip 2
and i want to use in flashcs5 script3
I want to be able to make a movie clip (that acts as a button) so the roll over effect finishes before the roll off effect is triggered. Like if a marker circles a button, i want the circling animation to stop before the roll off effects happens. Anyone know how to do this.
View 2 RepliesI have a buttons class that puts 9 pictures on the stage and each one represents a different movie and leads to that movie when clicked (or will lead there once I figure out how to reference it to the specific movie). I have 9 movies referenced through XML. And I am using flvPlayer. Currently I can only have one movie loading. I am not sure how to get each one to play upon click of the respective btn.
Here is some of the code I think is pertinent if figuring how to go about this:
ProjectOneButtons class
//I have each picture loaded through an array and each button is waiting for the right code through a Switch statement:
public function onButtonClick(e:MouseEvent):void {
var releventImageAray:Array = this["rowOfImages" + MovieClip(e.currentTarget).row];
var imageWanted:String = relaventImageArray[MovieClip(e.currentTarget).column];
switch (imageWanted) {
case "Video1" :
[Code] .....
The reason I included a bunch of code is to show that there is a play/pause button that is supposed to play the movie. But the thing is I only have the one movie referenced and I am not sure how to have it variable as to which movie is played and make it depend on the button that is clicked from the button class above. All of this code works as it is and I am getting no errors.
I have a series of mc's on the stage: but1, but2, but3 and I have an xml file which leads to an image. I want each button to access the respective image.
This is the code:
[code]...
I think this is the line with the problem var mc = "but"+(i+1);, because when I place but1, the but1 works.
Does anybody know which is the problem, or does anybody know a tutorial?
the website that im working on has 5 main buttons which then navigate you to a certain frame on the timeline which will display its respective information. but within one of those pages/frames i have 3 more buttons that i want to be active and take you to another frame on the timeline.
but when i try activating them with the same as3 code that i used on the other 5 main buttons, they do not work.
i have created two arrays i.e questArray=("identify movieclip car","identify movieclip cycle","identify movieclip bus"); answerArray=(car_mc,cycle_mc,bus_mc); here when ever the question is displyed the user has to click the correct movie clip.. i.e if the question is displayed as "identify movieclip cycle" then the user has to click the cycle movie clip. here the questions will be shuffled when ever we run for output and respective target should be matched with the question. can any one give the code for my above logic
View 1 RepliesI have two buttons in my flex app next to each other, ButtonA and ButtonB. When the user does a mouse roll-over on any of the two buttons, I want the roll-over skin (overSkin) to show on both buttons, i.e. Button A and Button B. I tried to do it using this when user rolled over Button B:
ButtonA.dispatchEvent(new MouseEvent(MouseEvent.ROLL_OVER));
and then when the user rolled out of Button B I do:
ButtonA.dispatchEvent(new MouseEvent(MouseEvent.ROLL_OUT));
Button I cannot do the same on Button A when the user rolls in/out. It causes an infinite loop resulting in stack overflow.
I am trying to write a flash app that will allow a user to select various regions of an image, similar to that of the selection tool in photoshop where a square region can be stretched and selected.
Would anyone have any ideas or tips for me that could get me going in the right direction? I have been researching for tools to help me write this but haven't been able to find anything useful..
I want to be able to make a movie clip (that acts as a button) so the roll over effect finishes before the roll off effect is triggered. Like if a marker circles a button, i want the circling animation to stop before the roll off effects happens. Anyone know how to do this.
View 2 RepliesUsing Flash CS3 If I draw two overlapping rectangles with two different fill colors, I get the expected results.If I draw two overlapping rectangles with the same fill color, the overlapping region appears white, almost as if there were an exclusion blend applied.
View 9 Replieswhen we are running movieclips in flash for a few minutes, white regions or white artefacts will start to appear on the screen, and it will slowly grow in size.we have cleared the objects from memory, but these white regions are still coming.
View 3 RepliesI have a project where i'm drawing to a stageSized bitmap by using BitmapData.drawusing the 'show update regions' feature of the debug player, i can see that the player always updates the whole stage although i changed only a small part of the bitmapdata.Can I somehow make the player only update that part of the screen where there were changes made to the bitmap data?
View 2 RepliesI'm working on my personal portfolio site and desperately need help with some AS3. my knowledge about AS3 is very rudimentary. Hope anyone who's I want to change the pointer cursor to custom movieclip when mouseover different invisible buttons. These buttons are mainly forward & backward button for my gallery. I got some help from other site but still unsolved. Please take a look at my fla attachment to point out what's wrong with the coding. To elaborate a little bit more as what I wish to achieve you can take a look at the sample URL...I just need the pointer cursor to turn to custom mc when it mouseover the hit area of the respective buttons.
View 6 RepliesI want to make a movie object move up & down when I click on the respective buttons. Now I can do this, thats easy... but what I want is when I hold down on the buttons that it moves on its own? And I don't have to go "*clicky* *clicky* *clicky* *clicky*" (thats the sound your mouse makes) To move the object up and down. Is this even possible? (enter newbie joke here)... Heres the code I got: on (press, release, keyPress "<Up>") { _root.block._y = _root.block._y + 4;} Now the other thing I want to do is have it stop at a certain height. Both at the top and the bottom of the screen. The idea being that someone can't scroll the object off the screen online tutorials? new career move?
View 1 RepliesI have a .png image of all 44 US presidents, I'm trying to figure out how I could break it apart so that each president can be clicked on. I'm a fairly experienced actionscript programmer, have done some game development work in the developer role but never in the design/UI role, thus I'm not great (or even good!) at some of the beginner stuff regarding UI. I was thinking I could use the lasso tool to select an area, then somehow make that selection into a grapic or movie clip symbol, but I can't seem to get that to work and I'm wasting a lot of time experimenting!
View 1 RepliesI have a Sprite covering the entire screen.Other than a certain rectangle of this sprite.I want the rest of the sprite to have alpha = 0.5. And for that particular rectangle, I want alpha = 0.
View 2 RepliesI've got a small action-script chart, that's meant to be live updating, and also be able to support more than 10000 points of data. The way it's currently set up it doesn't need to redraw the whole chart if the new line we wish to add doesn't extend that chart's boundaries. Yet it does, the redraw regions show the whole chart as being redrawn as opposed to the single line i need to add. When the chart gets a new piece of data from the javascript it does the following.(some stuff has been stripped for clarity.[code] Is there any better way to do that, that won't redraw the whole screen? Is my coding pattern wrong for this type of update?
View 1 RepliesI just wanted to know about a website's logo application. The website is www(dot)Logomaker(dot)com and I have question about how can the images be selected at various regions and their color can be changed ? What format are the images in the flash?
View 0 RepliesI've been making a flash animation for a client - the dimensions of the stage are 2,000px wide, 800px tall. They want a graphic in the background and a snow effect in the foreground.
The code I have written uses TweenMax to move a snowflake that has been dynamically loaded from the library on to the stage using attachMovie. When the clip leaves the stage, it is deleted and a new clip is created at the top of the stage.
I expect flash to redraw the background that the flakes pass over, but flash seems to also be redrawing space between the flakes - as if they were one movieclip - even though they are separate instances.
I have an array name region it has a couple of properties. "code", "name", "value"
I want to store this array in an indexed object called regions.
I would then like to access the object by referring to its sub property name
regions[1].code
regions[1].name
regions[1].value
I can set an array region.code, region.name and region.value but I can not set the regions values
regions[1].code = "abc"
regions[1].name ="alphabet"
regions[1].value =26
note: region is singular and regions is plural(many)
Can someone outline the variable definition and construct so I can access this information. Happy to replace the index field with the code value.