[URL]
i see a blink right after my animated mask is finished
Code:
stop();
var myMCL:MovieClipLoader = new MovieClipLoader();
var myMCL2:MovieClipLoader = new MovieClipLoader();
[Code].....
How do I ease the photo transition?[code]
View 5 RepliesPhoto Gallery Using XML and Flash Transition Question I was wondering how do i go about changing the type of transition between the images, the default one that happens is just teh fade, i want to make my own so when it loads it transitions between pictures with my movieclip or scene, here is the code i have for the gallery.
[Code]...
I've been trying to figure out a way to add a transition script to my existing AS2 code so I can make my MC (picture) transition each time a new photo is called. Using Flash CS4 and calling images through an XML document. The code works perfectly right now, except it only uses the "fade alpha" technique as an image transition. I need to use a different transition method. I prefer something a little funky if possible, but ultimately I need something like the built in "Blinds" compnent to work. Here is the current code:
[Code]...
How can I add a Squeeze transition effect between frames using the transition manager class on a simple slideshow using the goBack and goForward functions in ActionScript3? Below is the code I have so far:
stop();
function goBack(event:MouseEvent):void
{[code].....
i have a flex app that transitions between 2 states with the toggle of a button. my issue is that the effect of fading only seems to work on the 2nd transition and after. However, for my first transition... going from State1 to studyState... there is no fade effect whatsoever, in fact the components in state1 disappear completely (the footer fills the empty gap where the "body" use to be) and then the flex recreates the studyState (without any fade refilling the "body" with components only in studyState). After this first transition however, going between studyState and State1 working COMPLETELY fine.. why does this happen and how can i make it so that crossfade works STARTING FROM THE VERY FIRST TRANSITION?[code]
View 1 RepliesI have a presentation using the "presentation" template that comes with flash. I am trying to transition slides with the behavior slide transition options. but I've learned that it works find while going into a slide and doesn't go to the next slide when leaving.So basically I want it so that on right arrow first play out transition then go to next slide.
View 2 Repliesill try and give as much detail as possible: im trying to teach myself and make a flash site at the same time, so far so good, i already had one, but didn't like the layout
im using Macromedia flash 8 to make this. when i use the glow effect on text, and make a new keyframe to dim the glow again theres a weird blink on that keyframe and im not sure what is wrong.
live demo:[URL]...
I wanted to do a simple blinking-effect for my animations, and put this code into the eyes:[code]Nice and easy, right, giving the eyes a 10 percent chance of blinking every two seconds.Well, it works nicely in the beginning. But then, after a while, the blinking increases until finally the animations are blinking constantly.
View 4 RepliesI'm new at flash and I have a problem with a over of a button...What is happen is when I over the button, appear a subtitle with a hyperlink and when I put the mouse above the link, the subtitle blink....
View 1 RepliesI'm trying to blink a movie clip, say every 25 milliseconds. I also want "titleBlink()" function to start after a set delay and then stop blinking after, say, 2 seconds.I've tried using Tweener as the delay, then wrapping the blink code in AS3's timer class, but it didn't work properly.Here is my "blinking" code:
Code:
var blinkInterval:Number=25;
setInterval(titleBlink, blinkInterval);
[code].....
In a Flex 4 app (with Spark components) I have a ViewStack with various screens, and a TabBar to navigate between them. I'd like the screens to be able to "blink" their tab when something happens in them (like Windows task bar buttons).How can I do this? My idea is to hack the blinking state into the screen's label (inherited from NavigatorContent) by putting a * in it when blinking, and somehow reading that in a custom tab bar skin.
View 1 RepliesI have an image slide across the screen, depending on where the mouse location is. It looks great in the Flash GUI, but once I publish it, the image appears to blink or go jagged as it moves quickly across the screen. I couldn't figure out if this was a monitor issue, browser issue, or something I'm doing in Flash. It appears to show up differently, depending on what computer I'm using. (tested it on a Macbook Pro, and using a custom windows xp machine) I've tried JPEG smoothing options in the image properties, and setting the quality to "best" in the embed code. (I am not loading these images externally, they're in the .fla)Anyone seen this before? Is it because the image is too large and can't refresh fast enough? (Flash is set to 60fps) [URL](Click on "Let me Play" option, then move the mouse side-to-side)
View 1 RepliesI need to reproduce these java screens in AS:
[URL]
It's basically a PNG that gets refreshed once a second.
I need to reproduce 3 such screens in flash. The code below works, but the refresh (loadClip) blanks out the previous image before loading the new one, creating a blinking effect.
Is there a way around that? can I refresh the movieclips smoothly, like it was a video?
ActionScript Code:
// ========= screen updater =====================
screen1_url = "http://cs-ccr-www2.cern.ch/vistar_capture/lhc1.png";
screen2_url = "http://cs-ccr-www2.cern.ch/vistar_capture/lhc3.png";
[Code].....
I have a slideshow that loads images fia xml.
I have a caption in the middle of stage, that fade in with image.
my problem is that it blinks all the time. I don't know what should I do this is my code that fade image:
ActionScript:
this["image_dropzone" + _root.currentImage]._alpha = 100 * (_root.counter / (_root.fade * _root.second));
[Code]....
I have this Slideshow. http://www.flashkit.com/movies/Scrip...8470/index.php
How to make _root.caption Fade in and fade out with Image. Without Blink.
So I'm making a Flash site that needs to have different swfs on a bunch of different html pages for easy linking purposes. The problem: Even though the swfs are small, as you navigate between pages there is what looks like a white flash just before the swf shows up. I know this is the background of the html page as the swf is loading. Is there any way to load the page in a certain way to avoid this? Would a preloader help? Here's an example of the site:
View 3 RepliesI'm creating a game which has a healthbar. I want the health bar to blink couple of times when it goes over a certain amount or goes below a certain amount. How could I achieve this in AS3? I have a bar, which is a movie clip. Say it is called
[Code]...
I wanted to do a simple blinking-effect for my animations.
Code:
var timeDelay = 2000;
setFrameTimer = function(){
if ( (Math.random(1)*100) > 90 ) {
blink();
}} setInterval (setFrameTimer, timeDelay);
Nice and easy, right, giving the eyes a 10 percent chance of blinking every two seconds. Well, it works nicely in the beginning. But then, after a while, the blinking increases until finally the animations are blinking constantly.
Im making a game where there are 25 tiles with corresponding questions when you click them. One of the tiles must blink at a time, once the blinking tile was selected it will be hidden and the question will appear. If he answered wrong, the game is over else we will select another blinking tile after answering correctly (but the previous tile is hidden now). So how can i make the tiles blink or change its color using AS? And how i will select the available tiles, where some tiles are already disabled/hidden (already answered)? here is my pseudocode: (im not yet familiar with AS2 OOP concepts so im will use movie clips here & array to save the selected tiles)
select unique random no. from 0 - 25
check if it is in the array1.length not 0 && generated rand. no. is not in the array1
else store generated rand. no. to array1
tell movieclip(array1[0]) goto blink frame
if movieclip(array1[0]) finished blink
goto not blink frame
else hide the tile.
An example of it is viewable here:
[URL]
The .swfs that make up this website were originally made by somebody else who has asked me to help them get the site working online the way they intended. The main problem I'm having now is making this white space (that appears briefly in shape of .swf's dimensions) go away. The flash projects for the swfs do not even have a white background, neither do the HTML documents. Deadline for solving this problem is early tomorrow and I am stumped. This even happens with tiny, 40kb swfs with preloaders (I thought reducing swf sizes, adding preloaders might solve problem somehow)
I used Selection.setfocus("input textbox instance name") is not making the text box cursor blink.
View 9 RepliesI have an image on my frame. (a circle). I need this circle to blink on the screen based on user's input. The circle display time and the hide time should be input in a input text box in the beginning. Also this has to blink for "x" number of user defined cycles. I know how to control the delay between blinks but I cannot control the amount of time the circle stays on screen.
View 4 Repliesits for a photo gallery that I downlowded,the images fades in and out, but only start that when you click a button(timer).I'm trying to founf out where in the script I can change this, so that the photo's start automatically,rather than, on a button click.I have pasted the script below, is that ok, or would people rather a zip file of the files?
// (c) Copyright by Andrew DiFiore. All rights reserved. DO NOT REMOVE.
fscommand("allowscale", "false");
Stage.scaleMode = "noScale";[code]......
I am trying to create a page transition that will play a movieCLip transition into a page. and then it stops then when another button is pressed, it will play that transition out while loading the appropriate one. In the attached FLA, if you click on the red button first, the blue transition plays,
--red button code--
mybutton1.onRelease=function(){
_root.transitionClip.play();
}
and then stops on the stage. When you click the green button second,
--green button code --
mybutton2.onRelease=function(){
_root.transitionClip.play("out");
_root.transitionClip2.play();
}
it works correctly/ Playing out of the blue Transition and into the Red transition. However if I click it again it does the opposite, and just keep alternating.
If I add the
_root.transitionClip2.play("out");
to the first button then, nothing works right. I will eventually have more buttons, and may need to use a variable to control which "out" transitions is played, but how do I get the buttons to do this?I just want it to exit the current movie clip and play the "in" section of the desired clip.
I found the tutorial by Kirupa
[Code]...
Are there any examples of Flash + Javascript libraries which allow you to display a variable-sized Flash movie in your page that captures Webcam snapshots (still frames), and submits them to your server in a JPEG format?
Currently I know of: jpegcam
I have an XML photo gallery, that when it starts it has a loader for the photos. It always starts with the XML file determined sequence, which is fine, but what happens is that the tabs on the right hand side of the photo loader go astray while it is loading the first photo. If the first photo was loaded instantly this wouldnt be an issue.Is there a way that I can preload that first photo, so that it is in memory when the swf file reads the XML file, allowing the first photo to be instantly loaded ?Amongst other things, I tried embedding the photo in the swf file, but it didnt work...obviously I have no idea what to script...I also created another scene, prior to the main scene, to preload the photo.. but it didnt work either, again probably used useless script...Going further in detail, this is the main script:
Code:
import com.mosesSupposes.fuse.*;
ZigoEngine.simpleSetup(Shortcuts, PennerEasing);
[code].....
I have been searching for a particular photo gallery, and haven't got far. Here is an example of what I am looking for. With the example I wanting the user to be able to click on a photo for it to appear in the box above. I am looking for a tutorial, so I can customise to fit in my client's flash website.
View 2 Repliesi have looked everywhere for a tutorial on this - i have tried writing, and re-writing codes....i just cant get it. is there any tutorial i overlooked? here is what im looking to do - NO SHORTCUTS: have my main file that loads the buttons, my external swf container, my intro animations, and my swf "out" and "in" animations when a button is clicked i want it to point me to specific frame labels. i will have an "out" and "in" frame label and which will be the locations of the transitional starting points i want it to play the "out" transition, than unload the current swf, than play the in transition, than load the swf of the button that was clicked i want the animations to all be done using frame labels all within the MAIN swf file.... i have had no luck doing this....and i do NOT like the tween class....
View 10 RepliesJust trying to make a flash photo gallery that displays all the image files in a certain directory with the usual photo gallery functionality.
View 1 Replies