ActionScript 2.0 :: Getting Flv Video Seek Bar Control?
Aug 3, 2009i am working in Flash AS2. still now i want one flv video play back with seek bar control animation script (not a Flvplayback component).
View 0 Replies
Similar Posts:
ActionScript 2.0 :: Seek Bar For An Embedded Video?
Nov 19, 2010Does anyone know of any tutorials that explain how to make a seek bar with a handle that will be linked to the main timeline, so that when you move the handle the animation will move too, e.g. if you drag the handle to the centre of the bar then it will skip to the middle of the animation?
I currently have a handle that move on the x axis with in a set boundary, but not sure how to link it to the main timeline.
ActionScript 3.0 :: Video Scrubber/Seek Bar?
May 11, 2009I'm looking for a tutorial on the interwebs to create a scrubber for the length of a movie clip.For example:If a movieclip is 300 frames long, the beginning of the scrubber would be Frame 1 and the end would be Frame 300 with Frames 2-299 in the middle.I'd like the user to be able to scroll through the movie much like a Quicktime VR
View 2 RepliesActionScript 3.0 :: Seek To A Not-yet-loaded Second In Fl.video.VideoPlayer?
May 11, 2009I'm using fl.video.VideoPlayer and I'd like to be able to seek arbitrarily within the video. seek() works unless the given time isn't yet loaded, in which case the video hiccups and continues playing normally. I'd like it to seek to the specified second even if it's not yet loaded, loading/buffering as necessary. I've tried seek() and play() and haven't been able to make this work.
View 1 RepliesActionScript 1/2 :: Implementing A Seek Bar For Video Player?
Aug 2, 2009implement a seek bar for a video player. I know some basics about that. If possible send me any tutorials for that.
View 2 RepliesActionScript 3.0 :: Incredible, Ridiculous Video Lag When Using Seek()?
Oct 5, 2010I'm working on development of a medical training app and have come across a stumbling block I can't work out. I'm using FlashCS5, and AS3.Basic setup is this:
- 1 flvplayback with an H.264 MP4 loaded into it, stock controller
- 1 standard UILoader with a jpeg put into it
The jpeg still image is a sideview of a medical image, and the idea is that the user can move their mouse over this image and move the corresponding movie to a certain timecode. The full width of the image maps directly to the length of the movie clip, i.e. if you put your mouse on the very left of the still image, you are at 0 seconds of the movie, all the way on the right will be 49 seconds.
So, attached to my UILoader I added a simple routine that gets the mouseX, does some basic math to determine how far into the movie we should go, and sets the movie to that time.The problem is that using playheadTime, seek(), or seekSeconds() gives me incredible lag. You can move the mouse on the still image and the output window shows instantaneous reporting of the proper calculated time, but the movie itself might take 5-10 seconds to actually move to that time.
The movie has been rendered out using the CS5 Media Encoder and has a keyframe every 1 sec.Here is a link to a screen capture I did to show the problem. As you can see, using the standard controller is pretty responsive, but my other method is unusable. This happens locally as well, with the movie being fully loaded instantly.
h t t p://cl.ly/2gZY (1MB, quicktime)
Partial code, very basic:
ActionScript Code:
screenImageView.addEventListener(MouseEvent.MOUSE_MOVE, pullbackJump);
...
public function pullbackJump(e:MouseEvent):void {
[code].....
Flash :: Flv/video Player Which Allows To Seek For Part Of Not Loaded Video Part?
Mar 11, 2012I'am looking for a flv/video player which allow to seek for not loaded part of the video,just like on youtube.
View 1 RepliesFlash :: Getting Error While Trying To Seek In My Streaming Video Player
Jan 28, 2010I'm building a video player here[url]...
It's streaming RTMP, and I'm trying to get my video to seek correctly if the user clicks on the groove bar (gray bar under the green progress bar) Currently it does not seek and gives me a NaN on my duration variable and an error on my progress bar width variable, which is puzzling me.
For some reason my videoDuration variable is coming up as NaN when used inside of my seeker function, also I'm getting a null object reference error when trying to trace out playerCntrls.progressTotalW which is the total width of the groove bar[code]...
ActionScript 3.0 :: Video FLV Seek Beyond Loaded Buffer Like YouTube
Oct 14, 2009Does anyone know if it's possible to get your FLV to seek to a point beyond what's already been loaded into the buffer... just like how youTube does it?I want it to seek to the new point, drop all buffered data that it had before and then just start buffering from the new point.I'm NOT (and can't) use a media streaming server - is this possible without it? After a bit of research it's not looking good :sIf you can't do it then I'm thinking I'll have to preload the whole FLV before the user even sees anything!
View 5 RepliesActionScript 2.0 :: Seek To Specific Point In Video Before It Buffered
May 22, 2010I'd like to start playing a web-based video at a specific time, say 2 minutes in, even if the video hasn't been downloaded that far. I thought I could just "seek" to that time but that apparently only works when the video is buffered first.
So for example, this:
Code:
nc = new NetConnection();
nc.connect(null);
ns = new NetStream(nc);
ns.play("[URL]");
ns.seek(123);
video.attachVideo(ns);
Seems to work if you have the video cached or buffered or whatever, but if you don't it gives the "NetStream.Seek.InvalidTime" error, which makes sense. I want to know if it's possible to start playing a video at a specific time, even if the video hasn't loaded up to that point.
Professional :: Volume And Seek Bar Handles Missing From Video Player?
Dec 13, 2010I am creating a custom flash video player for my friend's wife's surprise 40th birthday party. I was progressing through and everything was working fine, but now the seekbar and volume bar handles are completely gone. I was working on doing some buttons to load each video segment when I realized the missing handles. My actionscript is below:
import fl.video.*;
var flvPlayer:FLVPlayback = new FLVPlayback();addChild(flvPlayer);
flvPlayer.playButton = playbtn; flvPlayer.pauseButton = pausebtn; flvPlayer.seekBar =
[code].....
ActionScript 3.0 :: NetStream.seek() Not Seeking To Start Of Video On Mobile
Nov 4, 2011I have a "video on demand" video that I'd like to seek at any point of the video. It's playing on a Motorola Xoom tablet. I can seek to the beginning of the video when the playhead is near the beginning. However, if I the playhead is towards the end of the video and I attempt to seek to the beginning of the video, the video seeks many seconds after the start of the video. I thought this might be a buffering issue, so I set inBufferSeek to true, but I still have the same issue.
View 2 RepliesActionscript 3 :: Seek Playhead To Specific Location In Flash Video?
Dec 21, 2011If you load up a FLVPlayback component in Flash or VideoDisplay in Flex and try to seek to a specific location or set playheadTime to a specific location, the movie always rounds up or down by very large amountsIn flash, drag a FLVPlayback component to stage and set source to Then try to video.seek(6) or video.playheadTime = 6;It will just goto 10. Likewise if you use their built in scrubber the only intervals are 0, 5, or 10. So at most the scrubbing frame you see is 3Here is an example of flex with the same result.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:media="com.synapsegroup.media.*">
[code].....
ActionScript 3.0 :: Video Player - Adding Seek From Download Functionality
Sep 1, 2011I have a video player that doesn't have "seek from unloaded time" functionality. I want to add it now. I simply load video like this;
stream.play("vidurl.flv");
(pseudo streaming)
Server side is ready. I can call videos like videourl.flv?start=xxx but cant play them in player cuz video comes without metadata
To sum up:
1. stream.play("vidurl.flv"); works, video plays
2. user clicks to seek bar. on unloaded part. I get the position and convert it to seconds
stream.play("vidurl.flv?start=10");
Doesn't work! No metadata what I should do after?
Actionscript 3.0 :: Seek Unloaded Time In Flash Video Player?
Jun 21, 2011I created a flash video player. Could any one show me how to seek unloaded time in flash video player?
View 1 RepliesActionScript 3.0 :: When Seek To A Point That Has Not Downloaded Yet The Video Player Freezes
Apr 30, 2009I am using progressive download to play video files in a video player. When I seek to a point that has not downloaded yet the video player freezes. The player enters the seeking state and stops playing.Clicking the play and pause buttons has no effect. The video player comes out of the seeking state and resumes playing only when the video file has completely downloaded. How do I implement the functionality where the player when seeked to a point that has not downloaded simply seeks back to the amount that has downloaded.
View 1 RepliesActionScript 3.0 :: VideoError:1003: Invalid Seek At Fl.video::FLVPlayback/seekToNavCuePoint()
Sep 4, 2009I am using an flv file with navigation cue points. When I try clicking on a button I created to go to "EndOfMovie" I get the following error: VideoError: 1003: Invalid seek at fl.video::FLVPlayback/seekToNavCuePoint()at vectorVideo_fla::MainTimeline/skipToEnd()
[Code]...
Actionscript 3 :: Seek Function Donīt Work On Flex VideoPlayer After The Video Finish?
Jan 22, 2012The video seeks normally when first playing but when it finishes i canīt seek the video again. I used a listener to call a function after the event TimeEvent.COMPLETE occurs(video finishes). In the function i call the function player.seek(20) for example but it doesnīt work. The video keeps in the end of it.
View 1 RepliesActionScript 3.0 :: Seek Frame-by-frame The MovieClip Timeline And Use The CurrentFrame To Control All Motion Child?
Jul 16, 2010i'd like to control MovieClip timeline witch contain several DisplayObject (like Sprite, Button, ...) these DisplayObject have Motion (AnimatorFactory). How can i do seek frame-by-frame the MovieClip Timeline and use the currentFrame to control all Motion child.
[Code]....
Flex :: Seek To An Exact Point In A Flash Video Without A Flash Media Server?
Aug 20, 2010Is the Flash Video (or Flex VideoDisplay) component capable of seeking to an exact moment in a video?It seems to always 'snap' to keyframes (which is understandable). I'm just wondering if there are any mechanisms in the video classes for seeking to exact frames, ie it should do the translation from keyframe to specific frame in the background rather than having to actually play the video forward to the desired frame.This is not a streaming file and has nothing to do with buffering. The player is just downloading a movie file from the web and playing it from memory.
View 1 RepliesActionScript 1/2 :: NetStream Video Control Button - Play Video Automatically
Jul 18, 2011The stop button plays as expected. The play/pause button plays as expected. The issue is when you press pause which will cause the play button to appear, then press stop. the video automatically plays and it shouldn't. I have bolded the control button script for convenience.
[Code]...
ActionScript 3.0 :: Video Control Menu For Youtube Video In Flash
Nov 22, 2010by following a tutorial on [URL], I was able to display a youtube video in flash, but the problem is that the video doesn't have a control menu. Just wondering if there is a way to make one, either it is customized or some default menu provided by youtube or flash.
View 0 RepliesActionScript 3.0 :: Makes Button Visible...but Button Stays Visible If They Seek Back In Video?
Mar 30, 2011when the video reaches 1 minute, a button appears. is there a way to hide the button again if the user uses the seek bar to go back to the 30 second (or any time before 1 minute) point?
View 2 RepliesActionScript 2.0 :: How To Control Flv Video
Aug 16, 2010i like to add btns to control flv video. the btns are: play, pause, stop & volume control. i know flash itself has some standard btns to choose from, what i want is my own customisable play, stop btns.
View 1 RepliesActionScript 3.0 :: Control A Video?
Nov 20, 2010I'm making a portfolio site, with simple navigation between pages (layers), nothing too tricky.
one of the projects is a video. I've imported it to Flash as an external video with playback component and it works fine when I play the flash movie.
the problem is, when I navigate away from that project page, the movie goes on running - I can tell by the sound.
how can I make the video stop when I navigate away from its page?
Professional :: Adding Control Bar To SWF Video
Jan 15, 2010I need to add a control bar (play, pause, progress bar) to a SWF video in Dreamweaver. It can be very simple, the look and feel is not that important, it just needs to be functional. The only way I can figure out to add one is to import a FLV file into Dreamweaver instead. The problem with this is that I can't figure out how to export a FLV file directly from Flash CS3, and using a converter program to create a FLV file nullifys the links in the menu at the end of the video. Any help would be great! This seems like it should be really simple to accomplish, but I have been pulling my hair out over it all day now.
View 6 RepliesActionScript 3.0 :: Control Loaded Swf Like A Video?
Oct 26, 2009I have looked everywhere to find out how to add a seekbar (so user can scrub and pause). It is so easy to skin a video, but I need the same type of controls for a swf. I see them on the web.
View 0 RepliesActionScript 2.0 :: Attach And Control A Video?
Nov 24, 2009I need to create a flv player in flash in that i have to attach a video and i have to control the video.
View 2 RepliesActionScript 1/2 :: Buttons To Control Video Not Working?
Nov 14, 2009I have tried to make simple buttons to control play, stop, paus and play again of a video.When that did not work I found the below instructions, and made movieclips for the buttons to use with the imported FLVPlayback (with none skin).In step 2 I choose play (for the first play-button/movieclip).In step 3, there is no video to choose in the box - only my own movieclips.In step 4 - what's the difference?In step 5 - there is no setting field...Control video playback using behaviorsSelect the movie clip to trigger the behavior.In the Behaviors panel (Window > Behaviors), click the Add (+) button, and select the desired behavior from the Embedded Video submenu.Select the video to control.Select a Relative or Absolute path.If required, select settings for the behavior parameters and click OK.In the Behaviors panel under Event, click On Release (the default event) and select a mouse event.
View 1 RepliesLose Control Of Video In Fullscreen Mode
Apr 22, 2010I'm having an issue with an FLV video playback in a scene. When I go to fullscreen mode, I seem to lose the ability to adjust the video object.
I am loading a new video via FLVPlayerback(). Since the video is being loaded into the scene on top of everything else, I use swapChildren() to put my button back on top of the video. When the video is done playing, I removeChild() the video.
This works in the normal playstate.
However, if I am in fullscreen mode, swapChildren() and removeChild both do not work. If I exit fullscreen mode, they are indeed working.