I have seemed to have forgotten how to go from a movieclip to a frame in the main timeline. I have done it a few months back but I dont have the fla right now to reffer.
View 4 RepliesI have seemed to have forgotten how to go from a movieclip to a frame in the main timeline. I have done it a few months back but I dont have the fla right now to reffer.
View 4 RepliesAfter the HitTest, How do I use the gotoAndPlay to direct the the main timeline to goto frame 2, and not frame 2 of _root.circle MC? with _parent?
I know this might be a simple question, but my brain hurts from the previous 'debugging'.....
both of these give me the same results.
onClipEvent (enterFrame) {
if (_root.circle.hitTest(_root.box1)) {
gotoAndPlay(2);
;
[Code].....
I'm trying to have a button go back to the main timeline and then goto another mc nested in another mc. For some reason it the output section when i test this says the following...Target not found: Target="_root.printmc" Base="_level0.instance8.instance29" Here is the script I have on the button.
on (rollOver) {
gotoAndPlay("move");
}
on (press) {[code]....
I have a button that is loaded into my main movie at level 2. in my main movie on the timeline I have a frame label called guestbook. I want my button, when released to go to trigger the frame label. on my button i have the script:
on (release) {
_root.gotoAndStop("guestbook");
}
Obvously this does not work because it references the wrong timeline so i tried:
on (release) {
_parent.gotoAndStop("guestbook");
}
thinking that somehow it would see the parent swf and work - haha - me and my dumb ideas of course it doesnt work.do you know how i can get it to work. Perhaps i should mention that the button that loads in at level 2 is inside a movie clip (for reasons of animation)
I simply want to assign a variable to the current frame of the main timeline (not movieclip timeline) I already know about _currentframe and it doesn't help in this case.
View 4 RepliesI am in the learning process. Working with FlashCS5 and AS3. if the issue appears to be too simple for you. Placed a movieclip(mcassessJohn) on the main timeline and moved to the frame labelled "johnFeedback" in the movieclip timeline using the following actionscript code.
[Code]...
I added a website preloader in a separate scene to the main frame of my website and scripted it to go to and Play the main scene or frame of the website when finished loading. I then put a command in the first frame of the main scene for the movie to stop (); at that point. The problem is that now the buttons on the main page don't respond to any behaviour commands to go to and stop at other frames in the main scene. I'm not sure if this is a conflict between the stop(); command in the main scene and the button behaviour command to go to and stop at another frame or an error with the way I'm identifying the scene and frame.
View 5 RepliesI have a main timeline with a button. I need the action for this button to gotoAndStop to a frame within a movieclip, within another movieclip. I have tried on the main timeline setting the actions of the button to:
on (release){
clip1.clip2.gotoAndStop("frame1");
}
and tried:
on (release){
_root.clip1.clip2.gotoAndStop("frame1");
}
lastly:
on (release){
_parent.clip1.clip2.gotoAndStop("frame1");
}
If I double-click on the movie clip (clip1) and then double-click on the movie clip (clip2), I have several frames labeled "frame1", "frame2", etc.The button doesn't work.
Working on an RPG type flash, and I have to be able to control a text-box from quite a few locations. The one that is causing me trouble is the inventory. I need to be able to access the textbox with an instance of "statusWindow" from within the inventory clip (instance name "inventory"), so when I mouse over an item within the movieclip it will change the status window on the stage.In this instance I want to mouse over inventory.invHealth from the main timeline to get the display.itemName and itemProps are strings containing information about the item.I tried the following but it gave me a "possibly undefined" error.
invHealth.addEventListener(MouseEvent.MOUSE_OVER, itemStats);
function itemStats(e:Event):void
{
root.statusWindow.text = itemName+"
"+itemProps;
}
I want to embed all the content of my flash project in a movieClip.
View 3 RepliesI've created a movie clip with an animation on it's own timeline 30 frames long. When I press 'Enter' while inside the movieclip the animation plays ok.On the main timeline, I have one layer 30 frames long with the movieclip symbol placed on frame one. If I press 'Enter' the main timeline play head moves to frame 30 but the movieclip animation does not play on the stage. If I press 'Ctrl + Enter' or publish to swf then the animation plays ok but I can't setup the stage how I want it without the animation playing on the stage. Do I need to just change a viewing setting (tick box in preferences) or is this related to AS3 or new CS4 inner workings?
View 4 RepliesI've got a problem using variables in my Flash project. I've got a variable called "count" decelerate in a layer of my main timeline.
Like this: _global.count=0;
In my movieclip I want to set that variable from 0 to 1.
For do that I wrote in a code layer of my mc: _global.count=1;
Now... When I perform a new action the variables count return to 0.
It's seem that Flash reset all variables.
I have a movieClip called target_mc on the main timeline... Inside that movieClip, I have four frame animation where there are aim1_mc and aim2_mc on each frame...I also have a for loop that hides aim1_mc on all the frames... It works fine on the first loop, but I see the aim1_mc of the frame 1 from the second loop...
ActionScript Code:
this.target_mc.onEnterFrame = function ()
{
[code]......
I have been trying to figure this out for 3 days now. Here is the structure on the timeline:
movie clip (portbtn)
inside port btn (button)
I need (button) inside (portbtn) to link to a keyframe inside of another movie clip on the main timeline called portPage.
Here is the code I have been trying to get to work and it seems like it would:
Select allusa.onPress = function() {
_root.portPage.gotoAndStop(1);
gotoAndStop ("closed")
};
Now this is what everyone else tries and it doesn't seem to work. Also I want to note that I have tried to trace the movie clip "portPage" and it says undefined which from what I have read means that the button is working but it is just not getting the right directory. I have no clue what other directory to put in there since this one seems to be the right one.
Is there a way to refer to an object on the main timeline from inside another movie clipThe "_root." function does not work and I am still unfamiliar with the "_parent." functions purpose.
View 2 Repliesthis ex. .fla controls the mc from itself but i would like to control it from the main timeline, ive tried a number of things but cant seam to get it to workthe .fla is here.and the code is here if you dont dl the .fla:
Code:
onClipEvent (load)
{
[code]........
How can I access the main timeline from inside a MovieClip. In short words I would like to be able to move the main timeline from a MovieClip, for instance if I have a MovieClip called myMc and I want the main timeline to gotoAndStop in frame (3) when myMc is done paying.
View 2 RepliesI have 6 frames on the main timeline each with a different movieclip. Is it possible that when one movie clips finishes running it will go to he next frame on the maintime line and run the next movieclip on the next frame with AS3?
View 1 Replieschimera-studio.com/misery.fla Any ideas as to why this won't work?? It's such a simple concept...
I have this code on the middle frame of a movieclip in my main timeline. When the nav buttons are pressed they play an animation and report their names to a variable called "navigation" that's declared in the first frame of the main timeline.
[Code]...
i am trying to splice data to an array which is on the main timeline by using code placed in a timeline within a movieclip and no matter what i try i dont seem to be able to do it i am an absolute beginner Code on timeline
[Code]...
I have a movieclip inside the OVER on a button, right now I have an animation that causes the button's brightness increases from 0 to 10 over 24 frames and then come stops because of a stop (). I now intend to add an animation after stop () which gets the button's brightness goes back to 0 again when you no longer hold the mouse over the button. I would therefore like to make some kind of mouseOut event that allows Movieclip go to the next frame. I have tried to insert a target path but it seems that it can't reach the movie clip inside the button.
View 1 RepliesLet us say we have a movieclip "mc1" on the stage. We also have another movieclip "mc2" inside mc1. We have declared a variable, say, var number1:Number=5 on the first frame of the main timeline. Now we go inside mc1 and then inside mc2 and write some code on its first frame. Is there any way to use the variable number1 over here? Can properties of mc1 be altered using the code written here? In AS2, it could be done using the "_parent" command, but it doesn't seem to work in AS3. (when we use parent and try accessing a property, it says that it is possibly undefined)
View 3 RepliesMy question. How do I control a movie clips FPS independently of the main time line. I believe in the previous version of Flash this was not possible but I think it can be done with CS4 with AS3.
I have five images with motion add to them. One fades out while the next fades in. To get this to work slower then the main time line I would have to add a lot of frame for that movie clip to not run so fast. Which this will make the file size larger.
I need this movie clip to run at say 12 FPS instead of the 24 the main timeline is running at.
I've got what I think isn't a real tough one however I can't seem to get this working.
I have a MovieClip. This movie clip has 21 buttons. These 21 buttons should be forwarding the user to frames 60-81 on the maintime line.
The actionscript I've added is not providing any errors however it's working either as these buttons don't do anything unfortuanlty.
Below is a sample of the code i've placed within the MovieClip itself, as the buttons and the button names are contained in the movieClip.
AS3 Code Being Used
button1_btn.addEventListener(MouseEvent.CLICK, button1Click);function button1Click(e:MouseEvent):void{ gotoAndStop(55)}
This code is listed for each button instance and to forward the user to a frame on the main timeline (NOT the timeline in the MovieClip itself).
Again, this code is contained in the MovieClip itself and not on the main timeline, as the buttons exist in the movieClip I.E. button1_btn to button21_btn
Lastly, to provide a visual idea of what i'm expereincing, please refer to screenshot embeeded in this message or the attachment (same thing).
as always, this seemed simple in AS2, but i am stumped with this simple command in AS3.
i have a main timeline [one scene] that has multiple movies, one after each other, in different frames. i need the buttons that are placed in a layer below the movies to access various movies in the scene. was really simple in AS2.
it appears that i can get my button to go to the frame, but the movie contained in the frame will not load and or play. [i have 2 frames dedicated to each movie, the second frame, in the actions layer has a stop command]. the following is the actionscript and the errors i am getting.
AS3:
food_btn.addEventListener(MouseEvent.CLICK, playfood);
function playfood(event:MouseEvent):void {
gotoAndPlay("food");
}
[Code].....
I have a movie created that is broken down into sections on the timeline (home about contact etc) Each section has a movieclip I want to be able to be in the about movieclip and click a button that will bring you back to the main timeline contact section Heres is the actionscript I am using to navigate the main timeline for each section
stop();
//handle events for buttons...
index.addEventListener(MouseEvent.CLICK, clickSection);
about.addEventListener(MouseEvent.CLICK, clickSection);
wind.addEventListener(MouseEvent.CLICK, clickSection);
[Code].....
This code is currently contained within my "mc_1" movieclip. I want to be able to have this code on my main timeline, however no matter what I try I constantly get errors, multiple different versions. I've tried adding mc_1 infront of everything, but that just gives an output error about a Sprite.Also, I'm currently using visible to control whether the back image to the textbox should show - What I'd really like to do is control it using a child, but they're movieclips not buttons, so when I try to addChild within the function it errors saying I'm trying to control a movieclip within a simplebutton function.
import flash.events.MouseEvent;
stop();
mc_textbox.visible = false;
[code].....
I have a stop on my main timeline. At the stop I have a movieclip play. In the movieclip I will have a video play. After the video plays I have a button for the user to continue play until the end of the movieclip. Once the movieclip is done I want to resume back to a specific frame in my main timeline.
View 3 RepliesI have a btn within a Movieclip at a certain keyframe the user is asked if they want to go back to make another selection from a choice category (within the maintimeline)
As of now the code I have for the btn that jumps you back to the main timeline is:
on (press) { gotoAndStop(_root.stop(24));}
Does _root.stop(24) need to be in quotes?
ie. "_root.stop(24)"