I'm trying to have a button go back to the main timeline and then goto another mc nested in another mc. For some reason it the output section when i test this says the following...Target not found: Target="_root.printmc" Base="_level0.instance8.instance29" Here is the script I have on the button.
on (rollOver) {
gotoAndPlay("move");
}
on (press) {[code]....
so i have a main timeline and a nested one. the main timeline has a button named "how_btn" that plays the nested mc (named "how"). once i get into playing "how", i have a button named "menu" that i want to bring the user back to the main timeline (where the "how" button is). this is how i scripted:
how_btn.onRelease = function () {
gotoAndStop("how");
}
menu_btn.onRelease = function () {
gotoAndStop("nav");
}
the how button script works, however the menu button does not. is this b/c it's in a nested mc? i tried specifying the root, but that didn't do it either.
I have an action script code for playing a nested movie clip from the main timeline. I want to come back to the frame2 of the main time line when the nested movie clip goes to the last frame. Which code I have to add at the last frame of the nested movie clip to come back to the frame2 of the main timeline..
View 1 Repliesi've made a drop down menu that works fine as it goes for dropping down when moused over the button which triggers is menu. but when im trying to add functionality which is triggered by the nested buttons that drop down i cant control the frame position of the main timeline does anyone know how i can do this.
View 1 RepliesI have a button inside a movieclip. When the button is clicked I want it to make a movieclip in the main timeline go to a specific frame. what's the code I need to use to define that movieclip located on the main timeline? Right now I have my code written inside the movieclip where the button is located because I have multiple buttons on multiple frames, and I don't know the syntax to define a button in a specific frame inside a movieclip.
Here's my current coding...
Code:
Select allfunction bwbtn2(btn:SimpleButton,frame:Number) {
btn.addEventListener(MouseEvent.CLICK,function() {photobw_img.gotoAndStop(frame);});
}
bwbtn2(bw19_btn,19);
I have a movie created that is broken down into sections on the timeline (home about contact etc) Each section has a movieclip I want to be able to be in the about movieclip and click a button that will bring you back to the main timeline contact section Heres is the actionscript I am using to navigate the main timeline for each section
stop();
//handle events for buttons...
index.addEventListener(MouseEvent.CLICK, clickSection);
about.addEventListener(MouseEvent.CLICK, clickSection);
wind.addEventListener(MouseEvent.CLICK, clickSection);
[Code].....
I have a btn within a Movieclip at a certain keyframe the user is asked if they want to go back to make another selection from a choice category (within the maintimeline)
As of now the code I have for the btn that jumps you back to the main timeline is:
on (press) { gotoAndStop(_root.stop(24));}
Does _root.stop(24) need to be in quotes?
ie. "_root.stop(24)"
I am making a website based in flash actionscript 3.0 i have a button nested in its own movie clip, because I have the button expanding to be able to read it i have figured out the only way to do this is by creating it as a movie clipa nd inside the movie clip creating it as a button. I added an event listener to the blog button by saying[code]...
i have named the symbol blog and have name the frame of where the blog page is going to be "blogframe" this line of code at the bottom is where i run into trouble the output window in Flash is saying "The blog button was clicked" just like i want it to. no errors are accouring why than is the playhead not going to frame "blogframe"? if the button is working when i click it the code is right i belive the problem here is it does not want the playhead to go to the frame i want it to. So i gues my question is, how can i make a button withing a movie clip interact with the main timeline?
I have some submenu buttons in a movieclip on the mainline. My first level of navigation in on main timeline. The submenus are grouped in movieclips on the main timeline. I basically used the same code on the main navigation for the sub navigation except the code for the submenus is in that movie clip. My trace statement reads the button is clicked (which was a quantum leap for me) but I know I need some kind of _parent code in there so it knows to go to label back on main timeline. I feel like I am so close.
Also is this an ok way to set this up? I couldn't figure out how to do it in one frame. I didn't realize this basic framework was going to be so difficult.
[Code].....
I can get my menu buttons to move me around the timeline, but am at a loss as to how to move to a frame on the main timeline using a button within a movieclip that has it's own timeline.
So what I mean is that on the mian timeline, a movieclip graphic with a button in it drops down. This movieclip has it's own timeline, and any AS to control the button has to be in this timeline. So how do I tell it 'when the button is clicked, go BACK to frame X on the MAIN timeline?
Here's the AS on the main timeline for the menu buttons (how would I adapt it to apply to buttonX within movieclipZ?, and where would I put this extra code in my movie?):
function Nav(event:MouseEvent):void {
trace("Nav "+arguments)
switch(event.target.name){
case "gilbert": gotoAndPlay(72); break;
[code]....
I have some submenu buttons in a movieclip on the mainline. My first level of navigation in on main timeline. The submenus are grouped in movieclips on the main timeline. I basically used the same code on the main navigation for the sub navigation except the code for the submenus is in that movie clip. My trace statement reads the button is clicked (which was a quantum leap for me) but I know I need some kind of _parent code in there so it knows to go to label back on main timeline.[code]...
View 3 RepliesI have seemed to have forgotten how to go from a movieclip to a frame in the main timeline. I have done it a few months back but I dont have the fla right now to reffer.
View 4 RepliesI have seemed to have forgotten how to go from a movieclip to a frame in the main timeline. I have done it a few months back but I dont have the fla right now to reffer.
View 4 RepliesI have a main.fla which has 3 movieclips inside it. All 3 mc's have timelines that run 40 frames. The main.fla timeline has each mc instance on a frame. mc_1 is on frame 1 mc_2 is on frame 40 mc_3 is on frame 81 as the main timeline plays the clips each one fades to the other. I need to know how to target this scenerio after mc_3 plays I need to have a goToAndplay (20) set up so the animation inside mc_1 starts playing (frame 20) of mc_1.
View 5 RepliesI have a magic cloud effect. On frame 30 of the nested effect I would like an mc on the main timeline to become visible.Not too sure how to code with frame numbers,a) Do I put AS on the timeline of the nested clip ORb) Write code on the main timeline to listen for when the nested mc gets to frame 30
View 5 RepliesAfter the HitTest, How do I use the gotoAndPlay to direct the the main timeline to goto frame 2, and not frame 2 of _root.circle MC? with _parent?
I know this might be a simple question, but my brain hurts from the previous 'debugging'.....
both of these give me the same results.
onClipEvent (enterFrame) {
if (_root.circle.hitTest(_root.box1)) {
gotoAndPlay(2);
;
[Code].....
I have a button that is loaded into my main movie at level 2. in my main movie on the timeline I have a frame label called guestbook. I want my button, when released to go to trigger the frame label. on my button i have the script:
on (release) {
_root.gotoAndStop("guestbook");
}
Obvously this does not work because it references the wrong timeline so i tried:
on (release) {
_parent.gotoAndStop("guestbook");
}
thinking that somehow it would see the parent swf and work - haha - me and my dumb ideas of course it doesnt work.do you know how i can get it to work. Perhaps i should mention that the button that loads in at level 2 is inside a movie clip (for reasons of animation)
actionScript 2.0
flash mx4 pro
here is a description of the flash movie.I have a map of the world on the main timeline that is a movie. The map is compiled of buttons that navigate the main timeline to named frames. -Ex. If you click Africa from the world map you are taken to the �Africa� named frame on the main timeline. This works perfectly.At the Africa named frame on the main timeline I have replaced the world map with a large map of just Africa. This large Africa map is a movieclip instance that has script on it to be draggable. This works perfectly.
The Africa map contains little movieclips that blink. I would like the little blinking movieclips to control the alpha of a movieclip (when rolled over/off) that is on the main stage and timeline.
I recently started creating a flash website from a template that was created back in 2004. I have very little knowledge of either AS 2.0 or AS 3.0. I am currently attempting to link my buttons that are in separate movieclips back to specific parts of the main timeline "scene 1". Currently when clicked, the buttons just cycle through the varying pages that have been created, "s1" , "s2" etc.
How do I link a movieclip/button back to "s8" in the main timeline?The AS 2.0(I think it's AS 2.0 anyway) that currently exists is as follows:
PHP Code:
on (rollOver) {
gotoAndPlay(2);
}
[code]....
I understand what first rollOver and rollOut commands are and they work fine, but the "On (release)" doesn't seem to go where it needs to.
i have a button and i would like to send the user back to the main timeline once click using on (release) does anyone know what code it is to send it back to the main timeline?
View 6 RepliesI'm trying to create a flash banner with several nested movie clips within it. I want each movie to run one after the other (not at the same time) but the top layer just keeps dominating (but not even working) even though I've added it's movie further down the main timeline. Before dragging on the second movie I inserted a keyframe.[code]...
View 3 RepliesI'm having a problem opening a masked mc on the main timeline (moonCycle) from the first frame of another mc. I've been using code similar to below, which isn't working.
_parent.attachMovie('moonCycle','moonCycle',this.getNextHighestDepth());
_parent.mask.moonCycle.gotoAndPlay(1);
Is there something else that will help since the moonCycle mc is on the main timeline and masked?
Basically I am trying to get buttons that I have in a drop down menu load an external .swf into an empty movie clip placed on the main timeline. However for some reason it is not working. The buttons are contained in a movie called "menuItems" which is then placed in a movieclip called "mainMenu" which is then placed on the main timeline.
on (release) {
_parent.gotoAndPlay("reverse");
if (_root._root._root.currMovie == undefined) {
_root._root._root.currMovie = "personalData";
[Code].....
I was trying to access some nested movieClips from the main time line but it was giving an error. What I have is a movieClip on the stage called "dog" and inside this movieClip I have two nested movieClips called "dogLH" and "dogRH". The movieClip "dog" was brought to the stage using actionscript 3.0 and when I tried to move the moveClips inside "dog" it gave me an error.
This is the code I have:
var dogog = new Dog();
dog.x =200;
dog.y =150;
[Code]....
What is strange is that if I add the movieClip "dog" to the stage manually and try the same thing it works. Any idea why it doesn't work when it is brought to stage with actionscript, but it works if I bring this manually?
I am trying to "gotoAndStop" on a frame in a nested timeline from the main timeline, but can't seem to figure out the correct way to write it with it's 'parents' etc... this is how I have tried which makes sense to me (have tried other ways too) but no success.
gotoAndStop(parent."framename");
I have a project I'm working on where the user is presented with an overhead shot of a building and is able to mouse-over the different rooms to choose one to "enter." Once clicked, the chosen room is an external .SWF that is loaded that has options to view other external .SWFs within that room. Problem is, within the first loaded .SWF, I have a "home" button that is supposed to take the viewer back to the main overhead view but I can't get the AS to work. I've tried _parent and _root with no luck (not sure I even typed out right code).
View 29 RepliesLets say i have a button on the first frame of my main timeline that leads to another frame on my main timeline. On the second frame, i have a button that has tweening animations inside it's over and down states. At the last frame of the tweening, i want to have a button that navigates to the first frame of the main timeline, and not the first frame of the tweening.
View 4 RepliesWhen the playhead is sent from the main timeline (Scene 1) to play a movieClip timeline, what code is used to send the playhead back to the main timeline (Scene 1) after the movieClip has played?
View 9 RepliesHow do you call a function on the main timeline from a an onRealease in a nested mc?I have created a function that resides on the main timline, and when a button is released I want to call it, but the button is nested in a movie clip.
View 2 RepliesIn the main timeline I have several movie clips, buttons and labels that navigate to the appropriate mc's. Inside the movie clip I have a button that will send you back to the main timeline and the appropriate label. I thought that would be relatively easy but it's not working.[code]...
View 2 Replies
