ActionScript 3.0 :: Navigating Back To Main Timeline Using A Button In A Movieclip?
Jul 14, 2009
I can get my menu buttons to move me around the timeline, but am at a loss as to how to move to a frame on the main timeline using a button within a movieclip that has it's own timeline.
So what I mean is that on the mian timeline, a movieclip graphic with a button in it drops down. This movieclip has it's own timeline, and any AS to control the button has to be in this timeline. So how do I tell it 'when the button is clicked, go BACK to frame X on the MAIN timeline?
Here's the AS on the main timeline for the menu buttons (how would I adapt it to apply to buttonX within movieclipZ?, and where would I put this extra code in my movie?):
function Nav(event:MouseEvent):void {
trace("Nav "+arguments)
switch(event.target.name){
case "gilbert": gotoAndPlay(72); break;
Lets say i have a button on the first frame of my main timeline that leads to another frame on my main timeline. On the second frame, i have a button that has tweening animations inside it's over and down states. At the last frame of the tweening, i want to have a button that navigates to the first frame of the main timeline, and not the first frame of the tweening.
I have a movie created that is broken down into sections on the timeline (home about contact etc) Each section has a movieclip I want to be able to be in the about movieclip and click a button that will bring you back to the main timeline contact section Heres is the actionscript I am using to navigate the main timeline for each section stop();
//handle events for buttons... index.addEventListener(MouseEvent.CLICK, clickSection); about.addEventListener(MouseEvent.CLICK, clickSection); wind.addEventListener(MouseEvent.CLICK, clickSection);
I have a btn within a Movieclip at a certain keyframe the user is asked if they want to go back to make another selection from a choice category (within the maintimeline)
As of now the code I have for the btn that jumps you back to the main timeline is:
I have some submenu buttons in a movieclip on the mainline. My first level of navigation in on main timeline. The submenus are grouped in movieclips on the main timeline. I basically used the same code on the main navigation for the sub navigation except the code for the submenus is in that movie clip. My trace statement reads the button is clicked (which was a quantum leap for me) but I know I need some kind of _parent code in there so it knows to go to label back on main timeline. I feel like I am so close.
Also is this an ok way to set this up? I couldn't figure out how to do it in one frame. I didn't realize this basic framework was going to be so difficult.
I have some submenu buttons in a movieclip on the mainline. My first level of navigation in on main timeline. The submenus are grouped in movieclips on the main timeline. I basically used the same code on the main navigation for the sub navigation except the code for the submenus is in that movie clip. My trace statement reads the button is clicked (which was a quantum leap for me) but I know I need some kind of _parent code in there so it knows to go to label back on main timeline.[code]...
so i have a main timeline and a nested one. the main timeline has a button named "how_btn" that plays the nested mc (named "how"). once i get into playing "how", i have a button named "menu" that i want to bring the user back to the main timeline (where the "how" button is). this is how i scripted:
how_btn.onRelease = function () { gotoAndStop("how"); } menu_btn.onRelease = function () { gotoAndStop("nav"); }
the how button script works, however the menu button does not. is this b/c it's in a nested mc? i tried specifying the root, but that didn't do it either.
I'm trying to have a button go back to the main timeline and then goto another mc nested in another mc. For some reason it the output section when i test this says the following...Target not found: Target="_root.printmc" Base="_level0.instance8.instance29" Here is the script I have on the button.
on (rollOver) { gotoAndPlay("move"); } on (press) {[code]....
I have a movieclip inside the OVER on a button, right now I have an animation that causes the button's brightness increases from 0 to 10 over 24 frames and then come stops because of a stop (). I now intend to add an animation after stop () which gets the button's brightness goes back to 0 again when you no longer hold the mouse over the button. I would therefore like to make some kind of mouseOut event that allows Movieclip go to the next frame. I have tried to insert a target path but it seems that it can't reach the movie clip inside the button.
as always, this seemed simple in AS2, but i am stumped with this simple command in AS3.
i have a main timeline [one scene] that has multiple movies, one after each other, in different frames. i need the buttons that are placed in a layer below the movies to access various movies in the scene. was really simple in AS2.
it appears that i can get my button to go to the frame, but the movie contained in the frame will not load and or play. [i have 2 frames dedicated to each movie, the second frame, in the actions layer has a stop command]. the following is the actionscript and the errors i am getting.
AS3: food_btn.addEventListener(MouseEvent.CLICK, playfood); function playfood(event:MouseEvent):void { gotoAndPlay("food"); }
I have a stop on my main timeline. At the stop I have a movieclip play. In the movieclip I will have a video play. After the video plays I have a button for the user to continue play until the end of the movieclip. Once the movieclip is done I want to resume back to a specific frame in my main timeline.
I am trying to do a simple thing in theory. In my main timeline I have a series of images with frame labels for each. In a movieclip (with its own labels) below the images, I have two panels of butttons that flop back and forth (to save space). The idea is to simply have the maintime play the frame specified by the corresponding button in the movieclip. [code]...
I have a MovieClip symbol that has 2 frames (for now). Depending on how it was initilialized, I want it to gotoAndStop at either frame or 2.Inside my class definition (Animal.as), I have written this as my constructor:
var type:String; public function Animal(t:String = "") { type = t;
If I have a movieclip on the main timeline, and a button in that movie clip. How would I go about getting it to advance the main timeline to its next frame? I understand that in AS3 movie clips are not connected to the timeline in the same way as they are in AS2 but I dont understand why the following works, or if there is a better way?
stop(); next_btn.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler1); function mouseDownHandler1(event:MouseEvent) { MovieClip(this.root).nextFrame(); }
In AS2 I need code for a button, on the main timeline, to go to a frame in a mc off the main time line. I have attached a picture of the time lines in case I have not articulated my needs well.
I have a button inside a movieclip. When the button is clicked I want it to make a movieclip in the main timeline go to a specific frame. what's the code I need to use to define that movieclip located on the main timeline? Right now I have my code written inside the movieclip where the button is located because I have multiple buttons on multiple frames, and I don't know the syntax to define a button in a specific frame inside a movieclip.
Here's my current coding... Code: Select allfunction bwbtn2(btn:SimpleButton,frame:Number) { btn.addEventListener(MouseEvent.CLICK,function() {photobw_img.gotoAndStop(frame);}); } bwbtn2(bw19_btn,19);
I'm having a bit of a hard time with calling a function in the main timeline through a button in a movieclip. The mc is in the main timeline and in it I added a button with this.removeMovieClip(); and so far it works, but when I try to call a function from the main timeline it just doesn't seem to work.
I'm having trouble trying to manipulate music using buttons. I can't seem to make music1 autoplay and loop when the movie starts. I want to stop music1 and play music2 when I press a button:
music1 in main timeline button to change music is inside a movie clip so far here is the code I found on the internet but I'm not sure how I can change it to do what I need:
var mySound:Sound; var myChannel:SoundChannel; var isPlaying:Boolean = false; var isPaused:Boolean = false;
I've created a movieclip with buttons inside that I want to use to navigate to different scenes on the main timeline. I have created a function() that loads the button movieclip into the main timeline, but if I try to write a function() to activate the button and move the main timeline to a different scene/frame label it doesn't work. I have tried various things:
I put the code above on the main timeline. It doesn't seem to work. Basically, I could put just an on(release) handler on the buttons, but I wanted to try to keeping all the AS in one place if I can.
I've created a movieclip with buttons inside that I want to use to navigate to different scenes on the main timeline. I have created a function() that loads the button movieclip into the main timeline, but if I try to write a function() to activate the button and move the main timeline to a different scene/frame label it doesn't work. I have tried various things:
ive made a simple game for a uni project, when you get game over a movieclip comes up and inside the movie clip there is a button to restart the game. how to i code the button inside the movieclip to gotoAndPlay to frame 1 on the main timeline?
I recently started creating a flash website from a template that was created back in 2004. I have very little knowledge of either AS 2.0 or AS 3.0. I am currently attempting to link my buttons that are in separate movieclips back to specific parts of the main timeline "scene 1". Currently when clicked, the buttons just cycle through the varying pages that have been created, "s1" , "s2" etc.
How do I link a movieclip/button back to "s8" in the main timeline?The AS 2.0(I think it's AS 2.0 anyway) that currently exists is as follows:
PHP Code:
on (rollOver) { gotoAndPlay(2); }
[code]....
I understand what first rollOver and rollOut commands are and they work fine, but the "On (release)" doesn't seem to go where it needs to.
i have a button and i would like to send the user back to the main timeline once click using on (release) does anyone know what code it is to send it back to the main timeline?
I have a project I'm working on where the user is presented with an overhead shot of a building and is able to mouse-over the different rooms to choose one to "enter." Once clicked, the chosen room is an external .SWF that is loaded that has options to view other external .SWFs within that room. Problem is, within the first loaded .SWF, I have a "home" button that is supposed to take the viewer back to the main overhead view but I can't get the AS to work. I've tried _parent and _root with no luck (not sure I even typed out right code).
When the playhead is sent from the main timeline (Scene 1) to play a movieClip timeline, what code is used to send the playhead back to the main timeline (Scene 1) after the movieClip has played?
In the main timeline I have several movie clips, buttons and labels that navigate to the appropriate mc's. Inside the movie clip I have a button that will send you back to the main timeline and the appropriate label. I thought that would be relatively easy but it's not working.[code]...
On the last frame of my swf, I placed a loadClip("filename.swf", fileholder); using a MovieClipLoader object. Now it is successfully loading the external swf, I can see it, but it immediately jumps back to the first frame of the parent swf. Why is this happening?I have placed the fileholder movieclip in the same frame. Also, the moviecliploader code is not inside any container, it is just placed into the actions section as is, starting with moviecliploader declaration.
The entire .fla animation consists of nothing but two really long movie clips. Which are placed on frames 1 and 2 of the main timeline. Now for reasons that are too deep for me to go into explaination about my boss is telling me that I have to have everything main timeline -no movie clips. I've tried copypasting all of the frames but they all paste wayyy to large on the main timeline and they wind up in different places on the stage.
How can I move all of the frames from my two movie clips onto the main timeline without everything breaking? Better yet - is there any way to just convert a movie clip into an .fla?
I have an action script code for playing a nested movie clip from the main timeline. I want to come back to the frame2 of the main time line when the nested movie clip goes to the last frame. Which code I have to add at the last frame of the nested movie clip to come back to the frame2 of the main timeline..
