how i would add actionscript to the following
i have a button that when clicked turns into an input box, where the user would enter their name
I need the program to save the name of the person and then print welcome <their name> in the next frame
I'm attempting to make a Username and Password input box, with a set username and password that will take you to the next frame, but whenever I test it it just stays in the same frame.
The code I'm using is
on(release, keyPress "<Enter>"){
if (password eq "###") {
if (username eq "###") {
gotoAndPlay(2) ;
[Code]...
but with the ### being what I actually have the username and password set to. As I said before, when I try this, nothing happens. I have the values for both the username and password boxes set to username and password respectively, but I still cannot get it to work. What am I doing wrong?
So far I have the AS which imports the userlist and saves it in the variable $usercheck.
userlist = new loadVars();
userlist.load("text/userlist.txt");
userlist.onLoad = function() {
[code]......
I have a login section that has a username and password input field. I am not sure if I am doing this right, but since there is only one username and one password, this is how I did this.
[Code]...
My question now is how can I have the username not be case sensitive. Is that possible?
So far I have the AS which imports the userlist and saves it in the variable $usercheck.
userlist = new loadVars();
userlist.load("text/userlist.txt");
userlist.onLoad = function() {
[code].....
I tried to make an exam and I came up with a few issues. The exam is located here: [URL]. One problem is that I don't know how to make the login and input usernames and passwords. How do I make the Start Exam button work so when an appropriate username and password are entered it takes you to the test.
View 11 RepliesI'm not very sure how to explain my situation... In short codewise: I have a movieclip that listens for a click-event, set trought addEventListener. At a certain point I 'addchild' a button to that movieclip AND disable the eventlistener of the buttoncarrying movieclip. (the button is over the movieclip on the screen, and clicking the button must NOT trigger the mouseclickevent of the parent movieclip.)
when clicking the button, i need to do some actions (works ok) AND get the movieclip listening to NEW clicks. But from the moment I add the evenlistener to the movieclip again, it seems to 'remember' the OLD moueclick meant for the button. That's what I can't have, I start to think that I need to flush a clickingbuffer belonging to the movieclip or something... Now in words: It's about a minimized login-window (=movieclip), that needs to maximize when clicking on it (anywhere on the window). When maximizing I add a form and some buttons. When clicking my "cancel"-button I want to minimize my login-window again and let it listen for mouseclicks again so we can maximize it again..
code for a button that "remembers" if it has already been clicked or not. For instance, the button is blue, once its clicked it turns red and does go blue ever.
View 2 Repliestrying to get the name of the user in Flash (not FLEX) without the PHP. Currently I have the session, the uid. But from here could not move forward towards getting the name.
var fbook:Facebook;
var api_key:String="xxxx";
var secret_key:String="xxxxx";
[code].....
I need to display a Username in a Flash Banner in my website. The Site is PHP and the header is made in Flash. My requirement is that, when a user Logs in, his name should be displayed in the Top of the site (in the Flash banner here) like "Welcome User". Is it possible ? I have the PHP file which displays username. All I need is that to merge it to the flash banner (through actionscript, isnt it ?)
View 1 RepliesI am just learning AS. I am trying to make a username and password box that will return a welcome message if the two text fields are entered correctly and a "Sorry Charlie" message if they are not.
I am using an If-Else statement. If I have the Else part commented out, I am able to enter text into the two text fields and get a welcome message. With the else statement though, I am not able to finish entering text in the second text field before the "Sorry Charlie" message appears.
[Code]...
i have a problem while username and password validation.i retrieved data (username and password)from an xml doc using http service but the problem is that i have to verify the username and password entered by he user with the username and password of the xml doc...
my xml doc is as follows:
<employees>
<employee>[code]....
I am trying to get the facebook username set to a flashvars and then pass it to a swf, like so:
var flashvars = {
AppID: "my_id",
Name: "" };
function init() {
[Code] .....
but the Name flashvars is showing up blank, is there another way to do this?
I'm using Flash CS4 Professional, and I'm using AS2 because I think it's a lot less complicated than AS3.I've found a few things on the internet that but I'm wondering if someone could just clear this up for me straight away.I have an input text field with instance name "username", and another named "pass". I then have a login button which has the action play();Once username and password have been filled out and the button is pressed, it plays until frame 3. Frame 3 only has the stop(); action in it for now. Here's what I need the rest of the actions to be:I want it to check the username and password against a text file. The text file reads:username=tylerngataki&pass=12345I then want an if/else operation like:
If (condition) {
statement
} else {
[code]....
I've been working with this tutorial:[URL] Using AS1, I've been able to extract a variable from a SWF, e.g. the SWF has a querystring associated with it, in the HTML of the web page on which it is embedded:
Code:
<param name="movie" value="loaderInfoExample.swf?userName=TestUser" />
<embed src="loaderInfoExample.swf?userName=TestUser" ....
It's easy to get the variable into AS1 - it's just there, without doing anything. I've tried to do the same in AS2, but I can't get it to work, using Permadi's page. All I want to do is to get the value of the 'userName' var from the SWF Querystring, into a variable in the SWF. The example on the Permadi page didn't work - I may have been doing something very wrong of course.
iam tryin to create a login system .i want the username to b only "mayuresh"& password to b "mayuresh" blow is my code
stop();
go_btn.addEventListener(MouseEvent.CLICK,perform)
function perform (event:MouseEvent):void[code].......
I have a flash game that asks the user to enter his username & password then he can start playing the game. After that the score gets saved to MySQL next to his username & password. The final step is to display his scores in the flash game. Everything works fine except for the last step which is calling back the scores from MySQL to the flash game.
I call the scores from MySQL using PHP file which sends the data to flash through XML. I can call the data from MySQL & display it in flash BUT I should enter a specific user name manually in the PHP file. The problem is that I can't make the flash game display the scores of the logged in user. for example: User A signs-in, plays the game, his/her score gets saved & then the problem occurs calling back his/her scores to the flash. In order to display User A scores in the Flash , I should replace the $username variable in the PHP file with "User A" so the scores can be displayed in the Flash file.
[Code]...
I installed FMS into a linux server with its own flash media encoder uthentication add-in. I restarted the fms service. The fms is working fine, i can stream and also visualize the stream on a client. When I connect to fms with fme i'm not asked for username and password. How do I set up users in fms so that the access to it should be restricted?
View 6 RepliesI wonder whether it is possible to replace FMS ClientID generated by a user name [URL]
View 6 Replieshow to get the current logged in username from windows and put it into a var, so I can create a dynamic text box to display it.
View 13 RepliesI've been trying to load some JSON from a URL with a username/password at the beginning.So the URL resembles: http:/[url]....I've been using the DataLoader class from greensock and it returns a Error #2032: Stream Error if the authentication is up but loads fine when it is disabled.I'm trying to add a 'Authorization' URLRequestHeader to get round this issue? Is this the best way forward?
Edit: I'm trying to use headers in a similar way to this post: Flex 3 - how to support HTTP Authentication URLRequest? but I'm not having much success. The base64 encoder I'm using is from here: http:[url]....
2nd Edit: latest code
_loader = new DataLoader(ENDPOINT, { onComplete:handleComplete, onError:handleError, onFail:handleFail } );
_loader.request.method = URLRequestMethod.POST;
_loader.request.data = new URLVariables("required=RandomData");[code].....
I know how to create a Username and password in flash. I want to know now is how to create a scene where users can register their own name and make their own password.
View 0 RepliesFor example i have this php code to check if the username is already in the mysql database
[Code]....
as you can see if the statement is true, it does nothing. I can't for the life of me figure out how to pass an error message to flash. If it helps, here's my as3 code.
[Code]....
I'm making a simple login application. I want to send a username/password while connecting to FCS, and have the SSAS of main.asc connect to a PHP document that will lookup the username/pass and make the necessary checks for the information in a mySQL database.
I'm trying to use the LoadVars() object, maybe you can't do this with SSAS? Or maybe i need to include some other actionscript file (I know when you use components you have to specify load("components.asc"); at the top of the main.asc file --- i'm hoping it's something that easy )
This is my first FCS app, I've done a lot of research but this one's sort of stumping me. I keep getting an error that looks like this:
/opt/macromedia/fcs/applications/my_app/main.asc: line 9: ReferenceError: LoadVars is not defined
Here is my code for main.asc:
Code:
application.onAppStart = function(){
this.userCount = 0;
this.users = [];
[Code]......
i am try to create a button that contain username and password fields, i have used the following code for the password field:
String.prototype.isWhiteSpace = function() {
return ((this != undefined && this.length>0) ? (this.split(" ").join("").length == 0 ? b=true : b=false) : (b=false));
};
var UserName = "";
[Code]...
In <FMS plug-in developer guide> we can see "You can query your organization's database of users and passwords to determine which connection requests should be allowed. Once the plug-in accepts the connection, you can update the database with a record of the
View 4 RepliesI need to display a Username in a Flash Banner in my website. The Site is PHP and the header is made in Flash. My requirement is that, when a user Logs in, his name should be displayed in the Top of the site (in the Flash banner here) like "Welcome User". Is it possible ? I have the PHP file which displays username. All I need is that to merge it to the flash banner (through actionscript, isnt it ?)
View 1 RepliesI am making a small game in flash, I would like to track scores but I cant figure out how to call the current username from joomla using actionscript. (creating the game in flex3)
View 1 RepliesMy problem is rather simple. I have a site built totally in flash that I need a couple other people to be able to log into, but I don't want them to know the password. Does anyone know if there a way that I can load the flash site in an iframe, and then use some javascript to fill the flash username and password with the correct text so that they can just click the login button without knowing the username and password?
View 1 RepliesIn the submit form I'm having a text field for to enter a username.How do automatically remove any spaces between characters in the username field?
View 3 Replies
