ActionScript 2.0 :: Load Xml In To Mc Lining Mc Up In A Row?
Jun 6, 2006
i have a mc that has 3 text fields category, name, amount and they are being loaded by xml. but when the movie is loaded it loads the mcs inline but i only want them to show 5 in each line. but when its a different category to go to the next line. so for ex.
1 1 1 1 1 - ROW 1
-------------------
2 2 2 - ROW 2[code]....
the numbers = a category so there are 5 (if there happens to be a total of 5) in each row but when the category changes it goes to a different row.
View 4 Replies
Similar Posts:
Mar 14, 2004
However, when i put the destination for my movieclip into the actionscript[code]...
View 8 Replies
Jun 15, 2009
Not sure if there's a fix for this or not. I've had this happen to me on the last two sites I've built. I embed the flash movie into my site in Dreamweaver, and everything works perfectly in Safari. When I view the site in Firefox however, the flash movie loads a few pixels off (see pics). Anyone have a fix for this?I've tried setting the vertical align of the movie to "bottom," and I've also tried dragging all of the cells tight in the site. I've even tried rebuilding the site all together. As soon as I bring in the flash, the cells get off in FirefoxSite in Safari:
View 1 Replies
May 26, 2010
take a look at this link [URL]. Notice that the flash file in the middle window is off-centered (hanging to the bottom right corner a bit). Any thoughs on why this is? The swf file is fine when I open it seperately and locally, but looks goofy when I throw it in the page.
View 3 Replies
Jun 17, 2009
I am trying to organize a series of images horizontally on my site. All the tutorials I find about image galleries utilize image thumbnails of the same width. I want to be able to use images of varying widths but cannot figure out how the ActionScript should be set up to handle this.[code]
View 0 Replies
Jan 4, 2010
Is there a simple way to take a few square images and set rotationY for each one to be the same degrees, then using an equation line each clip up after the previous one? For some reason the width property of the rotated clips is not lining them up correctly for me. I managed to get the desired result by trial and error (see below), but really need to get an equation for this so I can move the clips around with little hassle.
View 4 Replies
Apr 13, 2012
I am looking to create something like [URL]
Basically a video that allows you to click on products and pull up more info on them as they appear in the video.
The video I will be using is 3 mins long with 10 products you can click on, so I guess I will need to progressively download it. If I could embed it in the timeline it would be a piece of cake. I would just have buttons motion tweened moving with the products in the timeline. But the file size will be too large to make this a sensible option.
My question is, I understand cue points can be used to activate actions for progressive video downloads, but how would I track the buttons over the products using progressive downloading when I can't see the video in the flash timeline?
View 13 Replies
Sep 7, 2008
I'm loading a background into a background container with the following code:
loadMovie("backgrounds/bkg_wht.swf",bgContainer);
I'd like it to load in a 4 second alpha fading load instead of just a hard load. Any ideas what code I need to write?
View 3 Replies
Jun 2, 2010
I am working with a project that has many scenes. Each scene has a movie clip attached to it. The first scene is simple...just a couple of buttons and that is it. My worry is that when I add all of the videos that correspond with each button and publish the SWF will be a huge file. THE QUESTION: Does flash load ALL scenes of a movie or does it load the first scene and then load the other scenes when the user needs to view them?
My ultimate goal is to just have the first scene load and then when the user clicks on the buttons contained within that scene that only upon release does the corresponding scene load. Maybe I am doing this completely wrong and should look at doing it another way.
View 6 Replies
Jul 16, 2009
I have a rotaing menu that loads in images from an xml file, I would also like it to load in text info from the same xml file to the left side of the images that load in. In my main .fla have created a movieclip and called it 'textInfo' and inside that I have two dynamic text fields called 'headerText' and 'bodyText' where I want to load the text in. this is what I am using to loading in the text in my actionscript, is this correct?
[Code]...
View 22 Replies
Jan 25, 2010
I'm using loadMovie() to load external swf's and then send the swf to a specific frame, depending on the button that is pressed.
Code:
on(release){
_root.mc_mainloader.loadMovie("Main.swf")
_root.mc_mainloader.gotoAndPlay("fadeup");
}
Unfortunately it ignores the second line, which appears to be because the movie hasn't loaded by time it gets to the next line. As a work-around I made an interval to check for the movieclip width to be more than 0 and then run a function that chooses the desired frame, but this is very unreliable. Is there a simple way to load the clip and wait until it is finished, then immediately choose a frame on load?
View 4 Replies
May 6, 2011
I have a Flex application that just load an external SWF, but the application load and unload infinitely my swf.
[Code]...
View 2 Replies
Jun 7, 2005
Is there a way of making a normal loadVars.load load a url depending on a variable you set in the swf?
var reciever = new LoadVars();
loadurl = "test_onload_3.cfm?propertyID="+MY_VARIABLE_GOES_HERE;
reciever.load(loadurl);
so that I can set my variable and then load the variables with the propertyID that I choose in the swf??
View 4 Replies
May 3, 2008
The function below belongs to an XML based photoGallery.swf... Its menu is automatically populated from the same XML file as well (thumbnail picture, title, description). The pictures load into an empty mc called imageContainer.In another empty mc called textContainer, I would like to load some text.swf from the xml list as well.How would you include that in the code?
Code:
function loadTmbs () {
var tmbs:XML = new XML ();[code]......
View 2 Replies
Jul 27, 2009
So I have this flash app I'm making that uses a URL load to load a bunch of plot points from an address. When the loader finishes, it send the data to a plotter function. the plotter function clears the graphics in a shape called graphLine. It then draws a line from one plot point to another using the lineTo function. Basically every 3 seconds it makes this request and redraws the screen and updates the value of a textfield to the current y value. In flex builder 3, it works great in debug mode. The screen updates just fine. However, when I make the release build and test it out in a browser, it loads the data fine, but will not draw it until I stop the graphing process. Any thoughts on this one? Here's the code for the graphing function
[Code]...
View 2 Replies
Apr 2, 2009
I am pulling double duty with this question as it serves two purposes. I am developing a total flash controlled ad system for myself, but also need to use the same theory for a project for work.
Concept: I have a main movie (ad rotator system) that I then want to randomly load other swf's (individual ads) into this main swf after a set period of time. The random load I got set no problem. The problem I am having is to get it to move to the new Frame label of the main movie which then loads the smaller swfs. I am using the LoadMovie with nInterval time delay command in flash to load the movies.
[Code]....
View 5 Replies
Mar 16, 2011
I'm pretty new/bad at actionscript (3) for web. I have a site up for a client/friend [URL], but it takes FOREVER to load. I'm under the impression that a good way to make the site load faster is to load in swf's externally. Right now, the site, in its entirety, is one big movieclip. I have large images (movieclips) for background images. If you look at the site and are kind enough to wait for it to load (aprox. 45 seconds or so) you will notice how the background image changes when you click to go to each section.
I am trying to find a way to load in the background as external .swf's to cut down on the initial load time. I'm also open to any other ideas. Below is the as3 code for my buttons/how they direct the site. I'm hoping to use a similar/generic style to load the background images. I'm hoping to load the movieclips underneath the rest of the site, and use the same naming scheme (e.g. homeBTN.swf) to keep it organized.
[Code]...
View 3 Replies
Nov 19, 2009
An IE issue has me completely stumped. I have a coldfusion page that uses JQuery's AJAX .load function to load in a new flash file that is generated by coldFusion's cfchart tag. This works completely fine in firefox: the new flash file and new html elements load. However in IE: all of the html elements that are geneated with the flash object are loaded, except the flash object and embed tags do not show up at all after running an ajax call in IE. After looking in Fiddler, the flash application type response data doesnt even show up for IE. It does however for Firefox.I thought maybe it has to do with any kind of media, so i changed the chart type to output as a jpg file instead of flash. And it loads completely fine in IE. So something is preventing IE from receiving the flash response data.Here's what i've done so far - and no luck so far:
Added to the HTML header: <META
HTTP-EQUIV="CACHE-CONTROL"
CONTENT="NO-CACHE"><META
[code]....
View 2 Replies
Feb 19, 2010
I have a page that loads loads of swfs*. I'm loading in them all at the same time, Sequentially which is slowing down the intro animation. Is there a way to load swfs sequentially? Or if not load them on a timer (half a sec would do the trick I think)
*there lots of different dynamically generated Flex graphs so it's not possible to have them all in one.
[Code]...
View 2 Replies
Mar 2, 2007
I'm currently working on a project that contains a lot of data, about 14.000 records. This means an xml file of about 3mb. Now my question is: Should I use the xml file to load all the data at once, or should I use a webservice, that provides the data when I need it? Keep in mind that I'm new to webservices. And if I'm going to use a webservice: How do I store the data, in a mySQL database?How fast is a webservice?
View 1 Replies
Mar 24, 2009
I have a little app that can read and write content that is stored in XML files. As those files get updated and re-loaded quite often I have made the experience that the browser tends to use the old/cached XML-data. Can I somehow flag the URLLoader that I use to load the XML to always load the actual file instead of looking for cached versions?
View 4 Replies
Sep 18, 2009
I am stumped. I have tried to load a comboBox with a for-loop to load k school names and can not get it to load dynamically. Here is what works:schools_cb.addItem({label:varLoad.data.school1});It manages to paste the name of school1 into the comboBox k times.Then, when I try:schools_cb.addItem({label:this["varLoad.data.school" + k]});orschools_cb.addItem({label:this.getChildByName("var Load.data.school" + k)});it brings up k blank entries in the comboBox.I am a poor teacher trying to make a signup page for our school's math contest
View 5 Replies
Mar 7, 2011
I need some help? Anyone experience this problem before with IE8 FLASH bug? Can not get this to work on all subsequent refresh to the flash. I have a flash piece which simply renders only on the first initial load. After that, if i refresh or visit the page, it does not load correctly. It seems I am having this problem with the swf only on subsequent loading of the page or whenever a refresh happens.
View 1 Replies
Jul 13, 2009
I am trying to load, unload and load again the same movie clip from library.
View 7 Replies
Sep 19, 2011
When i try to load an external swf file using Loader.Load(); The swf starts playing even before the init event is fired. Is there any way to stop the swf from playing atleast until the init event or complete event is fired?
View 1 Replies
Jul 2, 2009
I am requesting an image via an ASP script: http:[url].....Shows up in browser but doesnt show up in flash when I use the moviecliploader to load it.I had a security error when I tried to load it earlier, but that warning doesnt show up anymore in the output window.
View 4 Replies
Oct 19, 2009
I'm loading (and unloading) external swfs into a holder in my main document. However, they seem to load perfectly the first time, but after that, they load at a different x and y. I've seen this happen before in someone else's file, but I'm not sure what the solution is.
This is the bare bones of it:
Code:
sceneHolder.x=0;
sceneHolder.y=0;
addChild(sceneHolder);
[Code].....
View 1 Replies
Apr 11, 2009
Okay so I am trying to load external swfs which load videos dynamically.
I can load the swfs into the parent fla fine (if I remove all the code and just place a circle or something on the stage of the swf), and the swfs are also loading their respective videos correctly. But when I try to load the external swfs, if they contain any casting related code in them, I'm getting an error
[AS]TypeError: Error #1009: Cannot access a property or method of a null object reference.
at swf1_fla::MainTimeline/frame1()[/AS]
Is there some specific method to casting within external swfs?
My code for loading the videos is this:
[AS]var vc:NetConnection = new NetConnection();
vc.connect(null);
var vs:NetStream = new NetStream(vc);
[Code].....
View 1 Replies
Dec 24, 2009
How I can make this script lo load mp3 files via an external xml file like music.xml and if is possible to load random
Code:
music = new Sound();
music.onSoundComplete = function() {
[code]....
View 1 Replies
Sep 19, 2009
the following code traces the loading status of '1.swf', and once it has loaded, starts loading '2.swf':
preload1.loadMovie("portfolio/100_design/1.swf");
onEnterFrame = preLoadMeter;
var tl:MovieClip = this;
[code]....
View 5 Replies
