i visited the site [URL] its really attractive, i have doubt how they are loading external swf so fast? and its also not chaging the URL address also, How did hide the SWF from decompiler??
View 14 RepliesUsing AS3 here - [URL]. I've got lots of externally loaded videos on this site most of which are XML driven. The "SoundMixer.stopAll();" works as it should, basically. I include it on each destination frame. If you click the "Jump Creative" entry point a video is set to auto-load and play. Now try clicking away on News while the video is loading. If the user clicks away while the video is loading, the audio will kick in after navigating away and after it has loaded.
View 12 RepliesI have preloader.swf in html (as3) that loads 1.swf (as2) which is my main page, the problem appears when it is in half way of preloading - 1.swf is getting started, it runs several frames, stops and it waits until preloader loads to 100%. I want 1.swf to be started when preloader reaches 100% not earlier.
Code:
preloader.scaleX = 0;
var loader = new Loader();
loader.load(new URLRequest("1.swf"));
[Code].....
I have a master to wich I'm loading external swf's. The preloader begins fine but when it reaches 10-12 % loaded the swf that I'm loading shows up. This leaves the preloader in it's place continuing counting... I want the preloader to stay until 100 % and THEN I want the external swf to show. Anyone understand my problem?
The code I'm using is this;
import mx.transitions.Tween;
import mx.transitions.easing.*;
[code].....
I'm having a hell of a time optimizing my loading sequence for a gallery site I'm working on. This is the way it works:
1. I load and parse an XML containing the URLs to the thumbs and large versions of the photos. - This step is fast and works the way I want.
2. I load the thumbnails in sequence jumping back and forth between two functions - one initiating loading of a thumb, and the other the event handler for that particular thumb which iterates a value, and then calls the initiating function again. I suspect this is where the major slow down happens.
3. When the iterating value has reached the same number as the number of URLs to load, the class dispatches a complete event, and all is well - except so much time has passed that no one will ever have waited to see the content ...
[Code]...
I'm loading an external .swf using the following code:
voiceover = new Sound ();voiceover.loadSound("Audio/Test.mp3", true);
The audio plays fine. My question is how can I create a pause, resume, rewind, or fast forward button for an external mp3?
Problem is that my rewind and fast forward buttons do not work properly in the sense that they start to mess up when you fast forward or rewind past the current scene. It seems to just skip through the whole movie and totally mess up the animation.the code for the controls is on a single layer and reads as the following:
stop();
play_btn.onRelease = function (){
play();
[code].....
I have a movieclip clip that plays when the movie starts, the movieclip is a visual assets that show's that the application is loading some information but it's not showing any loading progress, just playing while the assets are loaded.I created a for loop that will load the assets using a simple loader, and then when the object is loaded the application push the object to an array.Problem is that when the loading starts all the animation that i have on screen stops until the loading is finished.The whole point is that the animation will play while it's loading.
View 10 RepliesI spent almost a week trying to figure out how to unload a currently loaded swf using its button and loading a new swf... I have three files, a main.fla, file1.fla and file2.fla. In my main.fla, I have a code which loads the other two files. If i will click the "unload" button in the file1.swf, I would like the main.fla to unload the file1.swf and load the other file, file2.swf. Here is the code to load the file1.swf:
[Code]....
[FMX] I am having trouble loading an XML file on an external server into my flash movie when it is uploaded. The data loads in fine when the flash file is on my local computer with the xml file on a server. As soon as the flash file is uploaded the XML data will not load in.
View 2 RepliesI used to do this fine with AS2 and now i'm struggling to get it to work in AS3.my code is as follows:
PW1.addEventListener( MouseEvent.CLICK,loader1 );
//==================== PS function =============================================
var ldr:Loader = new Loader();
[code].....
I have created a main "site.swf" file that loads a "default.swf" file into a container after a preloader. On this default.swf file I have buttons that needs to load new external SWF files in its place in the container. All of the external SWFs contain buttons and navigations that will also call up other external SWFs into this container. So, I would like to know how to program each button (some are movieclips as buttons) to unload itself and load the respective SWF into the container (eg. AboutUsButton to call up aboutus.swf into the container). I do not have a main navigation on the site.swf file bacause the navigation changes on each SWF that needs to be loaded into the container.
View 2 RepliesI want to load external png's through this code:
(for this code, check the mcBandPreloader in de .fla file)
Code:
var imageLoader:Loader;
var RespJpeg:String = "images/arch1Proj.jpg"
function loadImage(url:String):void {
[Code]....
Here the problem is that I can't type html in my external txt file. (I did checked the html button in Dynamic Text Properties. What am I doing wrong here?
.fla can be downloaded at [URL]
I'm loading a external swf into a movie everything is fine with that. The only problem is that its loading only a part of it. Does anybody know why? Also, this swf is a mp3 player with streaming. The streaming part works but the playback doesn't.If i start only the mp3 player by itself it's working.here is the fla for the player
View 3 RepliesI'm trying to load a SWF movie into a target movieclip called blankmc. The SWF movie is loaded from an absolute URL (eg. [URL]/img/20042005113934movie3.swf ) My Loading Progress code fails to detect the SWF file size. However the same code works perfectly for a JPG! Essentially the .getBytesLoaded() and .getBytesTotal fail to work. Why is this and how can I get it to work for loading SWFs?
[CODE]...
Specifically, I am building a flash page that loads external swf files and inside some of the external swf files, I would like to add audio and flash video (flv) streaming from the Flaash Media Server. In some of the external swf files, (using a FLVPlayback component) when you press a button on the main timeline to unload the current playing swf the audio/video continues to play after loading the new external swf file.So I believe that my approach is all wrong and I should be working to dynamically load the .mp3 and.flvs in the external swf ... my questiion is how to unload those assets when loading the new external swf
View 1 RepliesLets say I have Main.swf and sub.swf, and I wanna load sub when I press a button from Main, but sub.swf has its own external class file attached, so here is the problem, when I load sub using loader class and I would get this message from the output panel:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at subScript()
seems loader class can not access sub.swf's external class when sub is being loaded.
Lets say I have subgallery.swf file that loads jpeg images. And I have gallery.swf file that loads subgallery.swf.The jpeg images and both swf files are in the same folder.When I test gallery.swf it loads subgallery.swf but subgallery.swf doesn't load images. When testing subgallery.swf alone, it loads jpeg files.Is there any limitation or setting preventing external swfs loading other content?
View 2 RepliesI created a site using Kirupa's external .swf loading tutorial. Now in one of my externally loaded .swf's, I am loading another external .swf. I've gotten this to work fine, but the second external .swf (loaded into the first) contains buttons that will swap this second external .swf with another external .swf. I can't seem to get the AS references to the variables set up correctly in order to swap the swf's. The initial .swf loads fine, but the button control gets complicated inside it. It sounds rather confusing, so I've included a link to the .fla's and .swf's below.
[URL]
The file structure:
-band.swf load's profiles_main.swf
-The buttons in profiles_main.swf are trying to load chris.swf (swapping it entirely with profiles_main.swf)
I have subgallery.swf file that loads jpeg images. And I have gallery.swf file that loads subgallery.swf.The jpeg images and both swf files are in the same folder.When I test gallery.swf it loads subgallery.swf but subgallery.swf doesn't load images. When testing subgallery.swf alone, it loads jpeg files.Is there any security limitation or setting preventing external swfs loading other content?
View 3 Replieseverything was going fine on a website project I've been working on, until yesterday. I'll try to explain the whole scenario first, and I'll put the code in here too so anyone can try to figure out what is wrong. Here's the breakdown of the site:
1) There is a MAIN SWF file that plays an intro and then stops on the last frame with the "Main" Navigation buttons.
2) Inside the Root folder where the MAIN SWF resides, there is another folder called "swfs" which contains six main external navigation pages, as well as another folder called "galleries" which contains additional external swf files for six gallery pages.
3) On one of the layers of the MAIN SWF, there is a movie clip called "mySWFLoadingClip" that the "Main" Navigation buttons load and unload the external swf pages onto. These all work perfectly. The problem start on the next step. This is the code I used for the navigation buttons on the MAIN SWF timeline:
[Code]...
If anyone can help me figure this out I would be really grateful. This is a very important project and the deadline is coming up very soon. Please help me figure out how to load an External SWF onto the main time line and then load an additional external swf from within the first external swf. I'm stumped.
Ok, everything was going fine on a website project I've been working on, until yesterday. I'll try to explain the whole scenario first, and I'll put the code in here too so anyone can try to figure out what is wrong. Here's the breakdown of the site:
1) There is a MAIN SWF file that plays an intro and then stops on the last frame with the "Main" Navigation buttons.
2) Inside the Root folder where the MAIN SWF resides, there is another folder called "swfs" which contains six main external navigation pages, as well as another folder called "galleries" which contains additional external swf files for six gallery pages.
3) On one of the layers of the MAIN SWF, there is a movie clip called "mySWFLoadingClip" that the "Main" Navigation buttons load and unload the main swf pages onto. These all work perfectly. The problem start on the next step. This is the code I used for the navigation buttons on the MAIN SWF timeline:
var Xpos:Number = 0.0;
var Ypos:Number = 0.0;
var swf:MovieClip;
var loader:Loader = new Loader();
[Code]......
how to load an External SWF onto the main time line and then load an additional external swf from within the first external swf.
So I am trying to load a text file into flash, grab all of the files listed in it and then load them into flash. Not working. Heres my code.
ActionScript Code:
import flash.display.Sprite;
import flash.events.Event;
[Code].....
Got a 31fps .swf that when I play it in Flash from Test Movie plays at the proper speed. However, when I test it in a browser, the .swf plays about twice as fast. The movie does load a H.264 .m4v video at frame one so I'm wondering if that has something to do with it. Does anyone know of a way I can force the .swf to play at 31 fps?
View 13 RepliesI have an scrolling number of photos moving from left to right controlled by:
[Code]...
I encoded an AVI w/ Media Encoder and dropped the FLV into a Flash playback component.In my compiled SWF, the video plays in hyperspeed (like it has a really fast framerate), but the audio plays normally.It seems like an encoding issue, but could it be something in Flash?I'm guessing there's some setting mismatch -- different bitrate, framerate, dimensions?[code]...
View 5 RepliesI seem to be having a problem with removeMovieClip.In my little ol' game I've been working on, I have a big problem. The removeMovieClip command only works half of the time. When using the Desert Eagle, a slow-firing weapon, both bullet shells and bullets are duplicated and used properly, and remove themselves when their time has come as programmed. But when using an automatic weapon... it seems to be duplicated shells and bullets so fast that they don't remove themselves properly!
How it works: Let's take the bullet shells, for example. The bullet shells are created and run a bunch of scripts to fall realistically. Once they hit the ground they run an animation which makes a little sound, makes 'em bounce off the floor a bit then stay still for 5 seconds. After those 5 seconds, they're removed. It's that simple, yet it doesn't work.
I hate having to show everybody my stuff every time there's a bug but I trust you guys with my problems (this project is mostly for experience anyways). Try using the Pistol (1) and you'll see it working fine. Then try using the M4A1 (2) or the Steyr AUG (3) and press down on the mouse button for automatic mode. Those bullet shells won't dissapear. Warning: DO NOT aim at the box. I'm also having a problem removing those bullets, so it bugs when you aim at the box.
Searched around for this one a bit. Kinda sucks that there are a lot of synonyms for HSV.
HSB, HLS, HSL, HSB, HBS, etc.
Basically Hue, Saturation and ( Brightness / Value / Luminosity ).
What I am trying to accomplish is an extremely fast way to convert 24-bit RGB values to 24-bit HSV values. I've tried a few different ways with somewhat unexpected results.
Using a lookup table for every 24-bit color eats tons of memory and is actually slower than calculating the values on-the-fly (doesn't make sense to me).
Here's a partial example of what I currently use:
Code:
package org.peaceoutside.utils
{
public class ColorMath
{
[Code]....
[URL]
You don't have to understand anything the problem is into the intro. It is quite simple but I don't really know how to fix it. The problem is the movie in the first page start before it totally loaded so depending of your connection and your cpu in doesn't start at the begin.
I want to fix that.
Here's my structure.
I have a swf which load the "template" which load another swf which load the movie
index.swf (preloader)--->base.swf--->preloader2.swf---->movie.swf
I think that the only thing you need is the code of the preloader
Code:
//code for the preloader and loader element
var l:Loader = new Loader();
l.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loop);
[Code]....
in the attached document "page6a.fla", i've been having some problems loading a external movie into a container.
1. open "page6a.fla"
2. open the library and double click on the symbol "staff_text"
3. i want to load the external file "6scroll.swf" into the "loadshape" movieclip symbol on level 84.
4. "page6a.swf" is being loaded on level 80 of another movie.
this is the code i'm using.. _level80.loadshape.loadMovie("6scroll.swf", 84);
here are the files: [URL]