I have flash file with a button that when clicked, needs open an html file in a separate browser window. That html file is in the same folder as the flash file. What actionscript code will do that?
View 8 Repliesif i wanted a flash button when clicked on to open a html page in a i-frame how would this be done? what would the script be for this particulare action?
View 6 RepliesI want to stop the looping at the end of the movie and then have that movie open up to a different website.When I insert stop action it works. The movie stops.However, whenever I add getURL(http:url]....); The looping continues and never goes to the site.I have tried seperate layers putting each command in a seperate keystone, and I have tried using both of them together.Also I am using CS4 and it gives me an error code for getURL---- The error code says sendtoURL
View 3 RepliesI am trying to get a flash button to open full screen with the titlebar still on top. I was able to get it to work when I am using an html button, but I cant get it to work using flash.[code]
View 2 RepliesI have a Flash menu and want the buttons to open jpg's in another swf on my HTML page. I searched for "localConnection", but couldn't find a suitable example. I also heard this is possible with Javascript.
View 2 RepliesI am trying to get a flash button to open full screen with the titlebar still on top. I was able to get it to work when I am using an html button, but I cant get it to work using flash.here is what I have.
AS:
on (press)
getURL("javascript:openBrWindow('http://www.whiskeyparknorth.com/whiskeyparknorth/index.htm','winFeatures')");
}
[code]....
Is there a way to open a html page in a borderless popup window using AS3. I've found info using AS2 with the "getURL" but nothing with the "new URLRequest" This is an example of what I'm looking to do: [URL]
View 2 RepliesIs it possible to use HTML frames with Flash? For example, I want to make a flash menu system on my site, and have the click of the menu buttons open up an HTML page in a different frame.
View 14 RepliesI have a swf within a html page. There is a function that opens an html page when an object gets to a certain x position. However, when the object gets to that point the new html page (in _self) opens over and over again and get stuck in a loop. Any way to escape this loop and what would be the best way to trigger this new html page to open when the x position of the object is true?
View 1 RepliesI am using the following script in Flash CS4 for a URL link[code]...
and I would like the link to open the new page in the same tab. In Safari it opens the link in a new window (when the default is to open links in the same tab). In IE it opens in a new tab, and also in Firefox (though in Firefox this is the default behaviour for me). Is there a way to override default settings and get the link to open in the same tab for all browsers?
I have read through several posts and threads on this subject and I'm still confused a bit. I have a flash menu that is working just fine. I want to put this menu into an existing web site that uses frames. I have tried two different action scripts and soon as I change the target to the mainframe, it all stops.[code]Any suggestions on why soon as I change the target.I did check names and IDs on the frameset and they match up with the target in the actionscript.
View 7 RepliesCheck those codes: Code 1:
ActionScript Code:
var link8:URLRequest = new URLRequest ("http://www.mysite8.com");
btn3sub1.addEventListener(MouseEvent.CLICK, nuestraIgle);
function nuestraIgle(event:MouseEvent):void {
navigateToURL(link8,"_self");
[Code]...
I have a website with 4 main pages as listed in the menu. I have then created more pages that are not listed but that I want to be able to open by clicking a button on the page - eg click on ' privacy policy' and that page would open. My problem is I have tried every action script I can find to get this to work but it wont
View 5 Repliesam trying to get some a.s. to recognize if i already have a page open so my button doesn't reopen/reload it again. i am using someone else's script so if you see something wrong (yes, i'm getting errors) could you please post the way it should be so i could copy and paste it????
[Code]...
I make two flash project and I export it swf
1- intro
2- home page
I want to add skip intro button to open home page otherwise I want the intro jump to home page when finish.so i add button on intro (skip intro) and write the following:
this.createEmptyMovieClip("homee",1); by the way i cant understand what this number meanhomee.loadMovie("home.swf");but what happened is that the intro still looping in home page
how can i open a new HTML window with a Actionscript button? I can't figure out the coding for it.
View 4 RepliesI have a simple website and I am going from one page(flash file) to another page(different flash file) using the following code.
var myLink:URLRequest;
function openPage(event:MouseEvent) {
switch (event.currentTarget) {[code]....
This works fine, but I want to be able to use "_self" so I open the new page in the same window yet it doesn't seem to work.
What I want is to be able to insert a button into the flash document, and when someone clicks it, to have it open a new window and go to a certain url. To see what I am kind of talking about, go to my website, where I have the flash document without any kind of interactivity. It is the "Connect with TFC" flash file, on the right side of the page.
View 1 RepliesI have this java script and want it to work in a blank flash file when i open it in a html page.
[Code]...
I am trying to get a html popup window to open when my movie hits a certain frame instead of a button. Im using the following code but it uses a button instead of a frame to open the popup.
on (release) {
customize the window that gets opened
0 equals NO.[code]........
I have created button in flash and I want that each time I press on the button, html page will open in frame name mainFrame in my site the problem is the html page always open in new window.
As you can see in the code attach, I have two frames in my page one called leftFrame and the flash button is in there, and the other is mainFrame which i want to open test.html in
Basically i have two SWFs on my page, one of them has a button which i want to affect the SWF to the right of the page. So when you click the button, it simply goes to and plays from a frame in the second swf!
View 7 RepliesI am using AS3 and having trouble linking a button to a local html page
View 8 Repliesi have a button labeled as events on the main page of my website and i want to link that button to an html page which i have createdThe page should be opened in a new tab
View 2 RepliesI want to load html page in same swf file using button i created one flash file in that i make the one button when i click on that button i want load the html page in that same flash file and hide that button and when click on back button again i see that button
View 3 RepliesI have a flash menu that I'd like to use on a HTML page. I'd like to make it so that when a user clicks one of the buttons, that button will remain highlighted on the page that uploads. An example of this would be at [URL]. How is this possible with action script? I was told in another board that it had to do with variables, though the person did not give a clear explanation that I could understand. I'm new to action script but am learning bit by bit!
View 6 RepliesI have a Flash home page which is part of a standard html website. A button needs to link to a specific position in the middle of an html scrolling page. My current script is:
on (release) { getURL("whats-hot.html#_cn"); }
"whats-hot.html" is the page, "#_cn" is the bookmark to the desired position. However, this is not functioning correctly and lands at the top of the page.
I'm wanting to use a button in flash to call a javascript function that resides in my main html page.I think this can be done, but I'm not sure how to do it?
View 1 RepliesGood day to everyone. I'm here today to seek help about Flash CS4 and ActionScript 3.0. The story starts when one day, my boss asked me to make a flash presentation about their upcoming user training for a newly developed software. I was enthusiastic and excited about it because it's been a long time that I did not use Flash (note that I don't have any experience in ActionScript 3.0). At first, everything was a bit rough as I need to recall how to properly use the frames to create a successful animation. As I was about to finish the project, my boss approached me again and asked if I could insert a menu page in front so that the users won't have to replay the whole thing again just to look for a little something on that part of the movie. So yea, at first I was abit hesitant to accept. I said that it will work with Powerpoint. But she's a total pusher and I was forced to say yes. Now I'm having this problem about how to make a flash button load a swf movie.I've tried searching all over the net for tutorials but most of the times the "getUrl" and other stuff are said to be outdated.
View 1 RepliesI have my main swf embedded into a html page, and what I want is that when a user selects a certain button it unloads my main swf and loads up a different one in the same HTML page.
View 1 Replies