ActionScript 2.0 :: Scrollbar Won't Show All Content
Aug 6, 2009
I've used Bill T's scrollbar code and loaded text from an XML file. When I drag, the text content is not completely shown.
I'm suspecting it has to do with the value "1.3" in this particular line:
Code:
scrollAmount=(this._height-(mask_mc._height)/1.3)/(mask_mc._height-scrollbar_mc.dragger_mc._height);
how I could use this code, to show up complete text content dynamically?
Here's the complete AS:
Code:
//set a variable
targY=0;
//set the drag action of the dragger
[Code].....
View 1 Replies
Similar Posts:
Aug 19, 2009
I have a movie clip that loads thumbnails from images folder by reading the location of image from xml file...The problem is I have put up a scroll bar but its not working i.e its not scrolling the thumbnails' movie clip contents. I am uploading the fla...any line of code I need to change I think its the scrolling function. The scrolling script I used is from kirupa. I don't want to use classes in this...and want the up n down buttons to remain.
View 6 Replies
Sep 15, 2009
I have a scrollbar in which a very long list which I can't make any shorter / smaller.roblem is, the script for the scroller demands that I place the text at 0,0 on the Flash axis, and the lenght of the text makes it run way down to the lower edge of the Flash workingfield.Somehow this makes the text run 'beyond reach' of the scrollbar; the scroller only shows about 2/3 of the list, and does not show the text beyond that point.How can I extent the reach of the scrollbar??? Can I shift the 0,0 point of the Flash axis (maybe place it higher, so the text falls into the more 'reasonable' regions of the workingfield of Flash?)
View 1 Replies
Jul 6, 2009
how to make facility of scroll bar on my textField .
myTex.htmlText= myText;
myTex.worldWrap = true;
myTex.multiline= true;
myTex.scrollV = true;
View 5 Replies
Sep 27, 2004
1. I've downloaded the Source for MX included in the "Hide/View the Scrollbar Component" page of It simply doesn't work when I open the file and publish it. I'm using Flash MX 2004, ... has anyone experienced the same problem and solved it?2. I've been able to set the scroll visibility with an external dynamic text using several procedures. One of them is:
SB1.setScrollTarget(_root.Texto1);
if (Texto1.maxscroll > 1) {
SB1._visible = true;
[code]....
View 3 Replies
Nov 27, 2009
I want to use the built in Scrollbar component to scroll within a movie clip or sprite whose content is generated by a for loop within my code. I can't seem to get it working when I set the scrollbar at authortime to target the movieclip into which i place the for loop at runtime.
View 9 Replies
Dec 22, 2011
I have several scenes in a Flash app; for some of them the Movie height is right while for others the content is very long so i would need to have scrollbars to let the user scroll down.Which is the correct way to handle it in this old version of Flash?
View 1 Replies
Feb 5, 2008
I have a scrollbar which works great however I want it to only be visible if the content in the dynamic text box is over a certain amount/height can anyone help I thought maxScroll would be the answer but cant seem to get that to work.
View 3 Replies
Jun 5, 2009
I'm working on a project that uses a loader to load up a swf, then display the loader in an area using a mask and a scrollbar to scroll through the content. The content in this project will change regularly, including the dimensions of the swf file (vertical dimension only, I'm not worried about horizontal scrollbars with this question).The problem I'm running into is I can't figure out a proper formula to get the scrollbar to position the content at it's bottom when the scrollbar is at the bottom What I have now is close, but not exact. If you scoll to the bottom, the bottom of the content would scroll up too high, leaving an empty 'blank' space where the content should be. I have an if statement checking for this currently, but this creates a 'dead zone' at the bottom of the scroll bar where the content is already at the bottom, and the scroll bar can continue to scroll down a bit.oes anyone know what I'm doing wrong here in the math to get a good scrolling going, regardless of the size of the content loaded by the loader?Here is what I have so far:
package { import flash.display.MovieClip; import flash.net.URLRequest; import flash.events.*; import flash.display.Loader; import fl.controls.UIScrollBar; import fl.controls.ScrollBar; import
[code].....
View 1 Replies
Jan 23, 2010
I'm wanting to make a vertical scrollbox (say, 150 px wide by 500 px high with a scrollbar) and where the content is defined by an XML file. The catch... I'd like each name in the list to become a button (or otherwise clickable) that opens a swf (also specified in the XML file). I have succeeded in making a static list where each "name button" was created manually... but I'm realizing my list is going to be hundreds of names and I'm thinking there must be a way to achieve this with XML. Here is the current version:
[Code]...
View 0 Replies
Aug 26, 2007
I have been reading through the Source/Experiments threads and trying to implement suggestions in the Content Scrollbar (Revised) [URL].. thread. I'm using Flash MX 2004, Actionscript 2.0 and throughout the course of this great thread the suggestions seem to shift and become geared for Flash 8. There are a few hints that MichaelxxOA kindly left for MX 2004 people loading content dynamically but I haven't been able to get to work. It's been a long work in progress but I feel like I am getting closer. At the moment I have been able to get the xml content to load into flash but I had to create a kind of dummy cell in the contentMain that is approximately the length of the combined images in the xml document. Is there a way to change the code so that it can read and load the content of the xml document so that when it varies flash loads into contentMain what ever combined height the xml includes? Here is the zip including .xml, .fla, .swf, .as and image with progress so far.
View 2 Replies
Feb 4, 2009
I am new to xml content in flash. I have been through the kirupa tut for loading xml content and have been successful in implementing it, but I now want to implement it into a scrollbar so I can use css and img tags. I can get it to work using the UI scroll component, but I want to use a custom scroll bar. I get the XML to load fine but I have no clue where to stick in the firstChild.childNodes[0] so I can call to certain attributes within the XML document. Below is the AS for the custom scroll bar.
Code:
stop();
holder_mc.setMask(mask_mc);
var LV:LoadVars = new LoadVars();
LV.onData = function(info:String):Void {
holder_mc._txt.text = info;
[Code] .....
View 1 Replies
Mar 11, 2009
On my site I want to scroll image boxes vertically. On releasing the scrollbar is there anyway to make the content being scrolled ease into a specified position so that it aligns with other elements on the site instead of stopping at a random coordinate?
View 1 Replies
Mar 30, 2010
I've successfully implemented the scrollbar from this great tutorial for some banners, but when I get to my 300x250 banner, the content gets cut off and disappears at a certain point while scrolling. This is the tutorial: [URL]. I altered the pieces for two different sizes without needing to alter any code, but this size is suddenly giving me problems. My FLA is attached.
View 3 Replies
Mar 3, 2010
I need to make a tab navigator in flex3. If no. of tabs increases then I need to show scrollbar to navigate over the tabs. I am trying to do this using tabBar. But if no. of tab increases it puts scrollbar around the parent of tabBar and its content. Whereas i need to scroll only tabs not its content like in firefox.
View 1 Replies
Oct 9, 2009
I have an application control bar at the bottom of my Flex application (with attributes width="100%", dock="false", left="0", bottom="0", height="50"). It contains a lot of elements (like buttons and labels). The width of the SWF is the width of the browser.When the user makes the width of the browser window smaller, after a certain point, thecomponents on the application control bar gets "squished": they are forced on top of each other. And so, it becomes confusing and ugly. To ensure that that doesn't happen, I've set the minWidth attribute to a value so that it'll always display the components without them overlapping each other.
But then, a horizontal scrollbar appears and hides the bottom half of the application control bar.I've googled and I found this article: flex verticalscrollpolicy bug (referenced by this SO question: Flex: Prevent scrollbar from covering content when automatically displayed).But that seems to apply only to a fixed size component. My component's width is a percentage. how to have the horizontal scrollbar appear and have it not cover up the application control bar?
View 3 Replies
Feb 11, 2011
so i have some scrollbar(track and button) and some content.the formula i am using to calculate to calculate y of content is the following:
//contentStarting.y and scrollbarButtonStarting.y are positions of sprites at the moment they are created
content.y = -((contentStarting.y -scrollbarButtonStarting.y) +scrollbarButton.y) * ((content.height- content.mask.height) / (scrollbarTrack.height - scrollbarButton.height));
the only problem i have is that i need to add extra space after content, so basically i want forumla to act as if content. height = content.height + extraSpace , but unfortunatelly setting the height scalesY, which is what i don't want.
View 1 Replies
Jan 22, 2011
I'm having a bit of trouble with this logic. My setup is typical, with a content MC and a handle MC the runs along a track with specified bounds. All I want to do is have the handle height adjust based on content height but in relation to the track height?
View 1 Replies
Sep 20, 2010
I worked through Kirupa's "Simple Custom Scrollbar" tutorial and successfully adjusted it to fit some of my content. Then I put it in a movieclip. I was hoping I could just go into each new instance of that movie clip, put in new content and be good to go. Unfortunately, when I edit the content inside my movie clip it edits the content of all the scrollbars in my timeline.
I tried renaming the instance "contentMain" to "contentMain2" in a second movie clip, that I also gave a unique instance name to, and adjusting the actions to match, but that still ended up renaming it in the other the scrollbars in my timeline as well as adjusting it in the actions of all the scrollbars.
View 2 Replies
Feb 14, 2012
I use AS3 which I keep separate from my fla project.
I have a contact page and the textfield where you type your message is an Input textfield with multiline and textwrap enabled. The height of my textfield allows for 5 lines of text, then you will have to start scrolling after that.
I use a my own scroll bar nested in a movieclip with instance name "txtScroller"
The Input textfield instance name is "messageText"
What I want to do: I want to hide the "txtScroller" mc and show it when the user has typed more than 5 lines of text (using enter to break to a new line, etc).
Now for my problem: The first part of the code works, the "txtScroller" mc is hidden, and I have even tested it with the trace function (see code bellow).
I can for the life of me NOT get the the second part to work, the part where i want to show "txtScroller" mc again. I've treid with the trace function as well but it shows nothing in the 'output' pannel (see code bellow).
The Code:
This is all I have with regards to hiding or showing the "txtScroller" mc.
Code:
if (messageText.numLines <= 5) {
trace("less");
txtScroller.visible = false;
[Code]....
View 9 Replies
Feb 4, 2009
Mainly been making websites all these years, but in my last year at school i started to get interested in Flash Actionscript. I've been at home for over a year in 2008, unemployed. I got back to school in September 2008 but quit the education as it wasn't for me. Now I'm looking to get a job, but I need a showcase, so I'm building my portfolio at the moment.
I'm currently working on my portfolio which i wanted to make in Flash using XML generated content. I got as far as getting the content generated in my prototype. Now I'm trying to build the real thing. I currently got a scrollbar on the left which contains the thumbnails. I used the custom scrollbar from [URL] ([URL]). The content in it is generated with xml and actionscript though.
[Code]...
View 2 Replies
Nov 9, 2011
I have a project Flash, that i want show content in a pdf file on swf file, but i don't know to show it
View 3 Replies
Mar 31, 2012
I am setting up a small community, online based Radio Station where it shows a section for the schedule. I would like this schedule to show different listings, depending on what day of the week it is.
I am fairly new to ActionScript, therefore I do not yet understand the syntax properly and understand ActionScript 3.0 would be easier for myself to learn first, however my movie is quite big as it is and unless I can convert it to ActionScript 2.0 I'll need to learn how to do this.
View 8 Replies
Jul 11, 2009
I have one circle mc, when i roll over the Circle it will show the content of the circle .. this part is working fine. but inside of the content i have one link . i am not able to select the inside of the link.
View 1 Replies
Jul 24, 2009
I am just wondering if it is possible to show an image instead of flash content for mobiles? I want to allow the adobe sniffer to do its thing when it is people using pc and mac browsers and direct them to the plug in page to download the flash player if they need it, but is there a way to sniff for a mobile / smart phone browser and if they cant view flash it will show an image instead?
View 1 Replies
Feb 20, 2009
I have two issues again, my first is one I have had for a while my website is blank when you first go it then it will play, I thought it needed a preloader so I put on up but it still seems to do the same thing, any suggestions?Her is my code on the first frame, their is a really detailed movieclip in the center could their be a way to load it quicker, maybe cut down on the time?[code]
View 3 Replies
Nov 9, 2007
I'm attaching several movieclips onto the stage inside a for-loop and populating a dynamic textfield within the moviclip inside the same loop.Tracing the texfield.text shows the proper value in the Output console. However, the text value is not visible on the stage. I've drew a shape next to the dynamic textfield just to make sure the movieclip is being properly attached. I can see the shape but there is no text next to it.
Code:
var xPos=200;
for(var i=0; i<image_list.length; i++){[code].....
View 7 Replies
May 14, 2009
I have an animation that shows items highlighted in a diagram. As the items are highlighted, the audio will play (to explain the animation). because we are creating this for people with possible disabilities, we also created captions with text for the audio. So, in separate layers, we created speech bubbles and text that is synchronized to the animated actions on the screen. this will also be synchronized with the audio. We want to have a button (close captioning button) that when users press it, they see the text captions and if they press it again, they don't see the text captions. my questions are
1) what will be the easiest way to create the effect i am looking for?
2) what actionscript command will i need for the button's actions?
View 14 Replies
Aug 31, 2009
I am making a website in flash for my business that consists of several elements. For example I have one menu on top with the usual "contact", "resume", "about" and so on, and so far this is not the problem as I only need some text to show up when the button is clicked. But on the left i have another menu with different sections called "animations", "layouts", "illustrations" and so on, and the point is that each link is supposed to start a slideshow with my artwork depending on the category. How to make the buttons show content, and I even created a simple slideshow (with prev and next buttons).
I used the following code for the slideshow:
stop();
right.onRelease = function() {
if (_root._currentframe == 5) {
gotoAndStop(1);
[Code] .....
Now the only thing left to do is to actually make the different buttons show the slideshows. I have tried to embed the swf of the slideshow in the frame of my content layer that is dedicated to the layout button. I've had to try a few things. at first the slideshow didn't do what I previously programmed it to: instead of me having to click next or prev, it just flipped through all the images continuously. That I fixed, but now the only thing that still doesn't work are the buttons. they seem active when I test the movie, but they don't take me anywhere- they're just stuck on the first image.
View 3 Replies
Apr 8, 2009
For example if I have 5 pdf files in a folder on the computer and then want to show these files in a swf file and if I then click on the pdf file open up the specific file. and if I remove or add a pdf file it will affect the list (its okay if its only updates the list when reloading the swf file)
View 1 Replies
