IDE :: Scrollbar Content Too Long?
Sep 15, 2009
I have a scrollbar in which a very long list which I can't make any shorter / smaller.roblem is, the script for the scroller demands that I place the text at 0,0 on the Flash axis, and the lenght of the text makes it run way down to the lower edge of the Flash workingfield.Somehow this makes the text run 'beyond reach' of the scrollbar; the scroller only shows about 2/3 of the list, and does not show the text beyond that point.How can I extent the reach of the scrollbar??? Can I shift the 0,0 point of the Flash axis (maybe place it higher, so the text falls into the more 'reasonable' regions of the workingfield of Flash?)
View 1 Replies
Similar Posts:
Feb 20, 2009
I'm building a small scroll component for a text box, which loads text dynamically from an xml file. I've got it working fine, apart from the fact that if the text isn't long enough to fill the text box, then the scrollbar still shows up - I don't want it too! Is there any tips / hints or even a snippet of code that someone can offer? Basically I need the scroller to only show if the text is bigger / longer than the height of the text box.
[Code]....
View 2 Replies
May 26, 2009
I am building a long timeline (50-100 entries) dynamically from XML. An entry can have either text or image or both. They all have the same distance from each other but they have different widths. there will be a slider at the bottom to quickly bring the user from one end of the timeline to the other end.
It's an interface that's similar to the aiga design archives. [URL]
The main difficulty I see is to dynamically load content that is currently visible first and content that is 'offscreen' later (or even unloading it if it enhances performance, does it?) I could try to figure out the math... but I know from experience that I get major headaches from such undertakings...
The second difficult task will be to determine the width of all entries before displaying them.. Is there a way in as3 to find out how wide an image is before completely loading it? Hmm that sounds a little unrealistic, but I thought I'd ask anyway
I am looking for an as3 class or library that could assist me in building this, mainly detecting if an entry is visible or not, or even better which entries are visible or not. Has anyone seen any as3 libraries related to such an interface?
View 2 Replies
Aug 19, 2009
I have a movie clip that loads thumbnails from images folder by reading the location of image from xml file...The problem is I have put up a scroll bar but its not working i.e its not scrolling the thumbnails' movie clip contents. I am uploading the fla...any line of code I need to change I think its the scrolling function. The scrolling script I used is from kirupa. I don't want to use classes in this...and want the up n down buttons to remain.
View 6 Replies
Nov 27, 2009
I want to use the built in Scrollbar component to scroll within a movie clip or sprite whose content is generated by a for loop within my code. I can't seem to get it working when I set the scrollbar at authortime to target the movieclip into which i place the for loop at runtime.
View 9 Replies
Dec 22, 2011
I have several scenes in a Flash app; for some of them the Movie height is right while for others the content is very long so i would need to have scrollbars to let the user scroll down.Which is the correct way to handle it in this old version of Flash?
View 1 Replies
Aug 6, 2009
I've used Bill T's scrollbar code and loaded text from an XML file. When I drag, the text content is not completely shown.
I'm suspecting it has to do with the value "1.3" in this particular line:
Code:
scrollAmount=(this._height-(mask_mc._height)/1.3)/(mask_mc._height-scrollbar_mc.dragger_mc._height);
how I could use this code, to show up complete text content dynamically?
Here's the complete AS:
Code:
//set a variable
targY=0;
//set the drag action of the dragger
[Code].....
View 1 Replies
Feb 5, 2008
I have a scrollbar which works great however I want it to only be visible if the content in the dynamic text box is over a certain amount/height can anyone help I thought maxScroll would be the answer but cant seem to get that to work.
View 3 Replies
Jun 5, 2009
I'm working on a project that uses a loader to load up a swf, then display the loader in an area using a mask and a scrollbar to scroll through the content. The content in this project will change regularly, including the dimensions of the swf file (vertical dimension only, I'm not worried about horizontal scrollbars with this question).The problem I'm running into is I can't figure out a proper formula to get the scrollbar to position the content at it's bottom when the scrollbar is at the bottom What I have now is close, but not exact. If you scoll to the bottom, the bottom of the content would scroll up too high, leaving an empty 'blank' space where the content should be. I have an if statement checking for this currently, but this creates a 'dead zone' at the bottom of the scroll bar where the content is already at the bottom, and the scroll bar can continue to scroll down a bit.oes anyone know what I'm doing wrong here in the math to get a good scrolling going, regardless of the size of the content loaded by the loader?Here is what I have so far:
package { import flash.display.MovieClip; import flash.net.URLRequest; import flash.events.*; import flash.display.Loader; import fl.controls.UIScrollBar; import fl.controls.ScrollBar; import
[code].....
View 1 Replies
Jan 23, 2010
I'm wanting to make a vertical scrollbox (say, 150 px wide by 500 px high with a scrollbar) and where the content is defined by an XML file. The catch... I'd like each name in the list to become a button (or otherwise clickable) that opens a swf (also specified in the XML file). I have succeeded in making a static list where each "name button" was created manually... but I'm realizing my list is going to be hundreds of names and I'm thinking there must be a way to achieve this with XML. Here is the current version:
[Code]...
View 0 Replies
Aug 26, 2007
I have been reading through the Source/Experiments threads and trying to implement suggestions in the Content Scrollbar (Revised) [URL].. thread. I'm using Flash MX 2004, Actionscript 2.0 and throughout the course of this great thread the suggestions seem to shift and become geared for Flash 8. There are a few hints that MichaelxxOA kindly left for MX 2004 people loading content dynamically but I haven't been able to get to work. It's been a long work in progress but I feel like I am getting closer. At the moment I have been able to get the xml content to load into flash but I had to create a kind of dummy cell in the contentMain that is approximately the length of the combined images in the xml document. Is there a way to change the code so that it can read and load the content of the xml document so that when it varies flash loads into contentMain what ever combined height the xml includes? Here is the zip including .xml, .fla, .swf, .as and image with progress so far.
View 2 Replies
Feb 4, 2009
I am new to xml content in flash. I have been through the kirupa tut for loading xml content and have been successful in implementing it, but I now want to implement it into a scrollbar so I can use css and img tags. I can get it to work using the UI scroll component, but I want to use a custom scroll bar. I get the XML to load fine but I have no clue where to stick in the firstChild.childNodes[0] so I can call to certain attributes within the XML document. Below is the AS for the custom scroll bar.
Code:
stop();
holder_mc.setMask(mask_mc);
var LV:LoadVars = new LoadVars();
LV.onData = function(info:String):Void {
holder_mc._txt.text = info;
[Code] .....
View 1 Replies
Mar 11, 2009
On my site I want to scroll image boxes vertically. On releasing the scrollbar is there anyway to make the content being scrolled ease into a specified position so that it aligns with other elements on the site instead of stopping at a random coordinate?
View 1 Replies
Mar 30, 2010
I've successfully implemented the scrollbar from this great tutorial for some banners, but when I get to my 300x250 banner, the content gets cut off and disappears at a certain point while scrolling. This is the tutorial: [URL]. I altered the pieces for two different sizes without needing to alter any code, but this size is suddenly giving me problems. My FLA is attached.
View 3 Replies
Oct 9, 2009
I have an application control bar at the bottom of my Flex application (with attributes width="100%", dock="false", left="0", bottom="0", height="50"). It contains a lot of elements (like buttons and labels). The width of the SWF is the width of the browser.When the user makes the width of the browser window smaller, after a certain point, thecomponents on the application control bar gets "squished": they are forced on top of each other. And so, it becomes confusing and ugly. To ensure that that doesn't happen, I've set the minWidth attribute to a value so that it'll always display the components without them overlapping each other.
But then, a horizontal scrollbar appears and hides the bottom half of the application control bar.I've googled and I found this article: flex verticalscrollpolicy bug (referenced by this SO question: Flex: Prevent scrollbar from covering content when automatically displayed).But that seems to apply only to a fixed size component. My component's width is a percentage. how to have the horizontal scrollbar appear and have it not cover up the application control bar?
View 3 Replies
Feb 11, 2011
so i have some scrollbar(track and button) and some content.the formula i am using to calculate to calculate y of content is the following:
//contentStarting.y and scrollbarButtonStarting.y are positions of sprites at the moment they are created
content.y = -((contentStarting.y -scrollbarButtonStarting.y) +scrollbarButton.y) * ((content.height- content.mask.height) / (scrollbarTrack.height - scrollbarButton.height));
the only problem i have is that i need to add extra space after content, so basically i want forumla to act as if content. height = content.height + extraSpace , but unfortunatelly setting the height scalesY, which is what i don't want.
View 1 Replies
Feb 5, 2004
I'am making a advanced mp3 player arund this tutorial: [URL] and i want the users of the player to see how long they have listen or how long time back of the song. i have the AS i what to use but i cant connect them. becuase the tutorial i used does not make a sound objekt (MUSIC)
[COde]...
View 1 Replies
Jan 22, 2011
I'm having a bit of trouble with this logic. My setup is typical, with a content MC and a handle MC the runs along a track with specified bounds. All I want to do is have the handle height adjust based on content height but in relation to the track height?
View 1 Replies
Sep 20, 2010
I worked through Kirupa's "Simple Custom Scrollbar" tutorial and successfully adjusted it to fit some of my content. Then I put it in a movieclip. I was hoping I could just go into each new instance of that movie clip, put in new content and be good to go. Unfortunately, when I edit the content inside my movie clip it edits the content of all the scrollbars in my timeline.
I tried renaming the instance "contentMain" to "contentMain2" in a second movie clip, that I also gave a unique instance name to, and adjusting the actions to match, but that still ended up renaming it in the other the scrollbars in my timeline as well as adjusting it in the actions of all the scrollbars.
View 2 Replies
Aug 1, 2010
I'm trying to play a 10 minute long video (h264/mp4) which is 39MB in size, after I call stream.play(fileURL) it doesn't start playback until its loaded around 12-16MB of the file (many many seconds later), I finally get onMetaData at this point too. Why doesn't it begin playback right away, or at least w/in a couple seconds? What can cause this bloated lead in time?
View 2 Replies
Feb 4, 2009
Mainly been making websites all these years, but in my last year at school i started to get interested in Flash Actionscript. I've been at home for over a year in 2008, unemployed. I got back to school in September 2008 but quit the education as it wasn't for me. Now I'm looking to get a job, but I need a showcase, so I'm building my portfolio at the moment.
I'm currently working on my portfolio which i wanted to make in Flash using XML generated content. I got as far as getting the content generated in my prototype. Now I'm trying to build the real thing. I currently got a scrollbar on the left which contains the thumbnails. I used the custom scrollbar from [URL] ([URL]). The content in it is generated with xml and actionscript though.
[Code]...
View 2 Replies
Nov 8, 2009
I made a scrollbar class that works pretty well. I'm trying to come up with an idea for how to set to the height of the scrollbar vs the height of the scrolling content. This is a standard thing that happen in the OS. Seems there should be a minimum number and the maximum value should be reached as the size of the content approaches the size of the visible area.
View 3 Replies
Apr 26, 2009
how I would convert this vertical scrollbar into a horizontal scrollbar
heres the code:
onClipEvent (load) {
diff_y = bound_box._height-scroller._height;
bounds = bound_box.getBounds(this);
top = bounds.yMin+(scroller._height/2);
bottom = bounds.yMax-(scroller._height/2);
[code]....
View 3 Replies
Aug 15, 2009
I'm have made some buttons (movie clip) and when I click on it, I want a file (home.swf) to load in a loader (mx.contents.loader) and I want the other buttons to do the same, all load into the same loader. I have no Idea how to do that. The way I have it set up now, the home.swf will load over the entire screen and that is not what I want. I just want the content to load into the loader and have its content change once I click on the other buttons. Here is a copy and past of that I have at the moment, I'm using Flash 8 to do it all.
[Code]...
View 1 Replies
Apr 20, 2009
How to remove a loader and its content using removeChild or any other way, I had removed the loader but its content still playing in the background i know that from the sound of the content.this is the my code for removing:
removeChild(getChildByName("SampleLoader"));
View 9 Replies
Oct 1, 2007
how it is possible to edit dynamic content and modify the content and save it, all within flash.I have tried some experiments in the past and have got the text to change etc which is easy but i need a way to save the content so the next time anybody sees the flash it will have the latest content until i change it again.
View 2 Replies
Jan 28, 2011
I'm loading one SWF into another but the internal one is coming over the main content and that can't happen.here is the part of my code where the external content is being loaded anyone hason what I can do to fix this? here is my code:
Code:
var loadAnimBox:Loader = new Loader();
var vid_mc:MovieClip;
[code].....
View 2 Replies
May 20, 2010
I have a menu whee you can choose a picture to lead, works great with first selection, but when you choose a different picture it loads over the last picture,I want to substitute the content of that movie clip not to load all the pictures in the same space. I treid to use clear() and removeChild(), but this only works when I choose pic1 then remove that to load pic2, is there an easy way to substitute the content for the new content?
View 1 Replies
Oct 29, 2009
I am a designer working in a flash file on the navigation part. The web site (is not yet posted) works fine but I need to change the contents when the menu is clicked (contact us, etc. ..). I need to find where the information is so I can change the address, phone number, info. but I have looked everywhere and cannot find it. Where could it be hiding?
[Code].....
View 4 Replies
Jun 2, 2009
I am working on a project wherein a long (40-50min) flv plays inside a flash interface. I have a set of buttons that I would like to use to skip to different parts of the video as it plays, this works fine on my local machine using cue points but of course online I cannot jump to sections that have not yet been buffered, I'd like to be able to do this if possible. I'm looking at a couple of options at the moment...1, Use a content delivery network that offers a flash media server, as I believe this will sidestep this issue, however this will cost money that isn't really available for this project.2, Split the long movie file up into chunks and have my navigation buttons load a new flv onClick.If I go for option 2 is there any way of keeping a cumulative progress bar running as if it was all one video.
View 11 Replies
