how it is possible to edit dynamic content and modify the content and save it, all within flash.I have tried some experiments in the past and have got the text to change etc which is easy but i need a way to save the content so the next time anybody sees the flash it will have the latest content until i change it again.
View 2 RepliesIs it possible to access and modify flash content via js (JavaScript) and if yes, then, How to do that?
View 2 RepliesI have an xml doc which works beautifully....now I want to edit the "content" so that it display html content, ie....within the text of the "content" I could add bold tags or add a links or something like that....I have looked up and down and no thread I could find has a straight forward definitive answer...not just on here either...is it that difficult...i doubt it?I will have to set the properties of my text box to accept html...right?so something like this....
theText.html = true;
THis was my attemp...(the first part)...but no deal...
Code:
<icons><icon image="shoes.png" tooltip="www.shoes4crews.co.uk" content="I made this...<![CDATA[<a [code]....
I'm actually relatively new to flash and actionscript but I could say I have fair knowledge about them. So anyway, I usually build flash websites the traditional way using timeline animation and scripting. Today I had a job interview and they said they're looking for someone who can develop any web design into a Flash CMS with a back-end office for the client to edit the content without having to edit the FLA file or any code.
Accordingly, I'd like to know where and how to start. What are the main concepts I should follow/adapt?
i have a file that I am trying to allow users to modify their course name and the mailto content. I wanted to provide them with one easy to edit document, either a txt file or xml. I assume I can't use a txt file since I need a link, but possible I am wrong? I was also trying to use css, but I have not tackled that yet.
Right now the text is inside of the actionscript.
I need to change the text and the link. I've attached my file to see if anyone has any pointers?
I need an easy way to let my customer edit txt content on the web..
View 5 RepliesThere is possible to save as image a html content which is "under" flash of object ? I want to take a screenshot of web page and add text or graphics then save it to file.
View 1 RepliesI'm have made some buttons (movie clip) and when I click on it, I want a file (home.swf) to load in a loader (mx.contents.loader) and I want the other buttons to do the same, all load into the same loader. I have no Idea how to do that. The way I have it set up now, the home.swf will load over the entire screen and that is not what I want. I just want the content to load into the loader and have its content change once I click on the other buttons. Here is a copy and past of that I have at the moment, I'm using Flash 8 to do it all.
[Code]...
I'm loading one SWF into another but the internal one is coming over the main content and that can't happen.here is the part of my code where the external content is being loaded anyone hason what I can do to fix this? here is my code:
Code:
var loadAnimBox:Loader = new Loader();
var vid_mc:MovieClip;
[code].....
basically i have to generate some movieclips dynamically and then eidt their content...
Code:
for(j=4;j>=0; j--){
var mc = _root.bottom.panel.duplicateMovieClip("copy"+j, j);
if (j===(4)) {posit=50;
[Code]....
how i can acces the generated clips... i tried _root.bottom. "copy"+j).company._visible=false; and does not work...
The HTML content below the flash content not displaying in IE8 browser. Here is the code:
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,24" width="100%" height="100%">
[code]......
I'm looking for help in something that I can't figure out I'm receiving in a PHP some data sent by a .swf...
var requestHeader:* = new URLRequestHeader("Content-type", "application/octet-stream");
var request:* = new URLRequest(url);
new URLRequest(url).requestHeaders.push(requestHeader);
request.method = URLRequestMethod.POST;
request.data = this.getByteArray(o, a, l, a2, l2);
navigateToURL(request, "_blank");`
I can't modify that code... that's a swf... but it works...
[Code]...
I would like to create a Flash menu but want to load HTML inside a targeted div on the same page dynamically without refreshing. I've seen several people say iframes can be used but I would prefer to stay away from iframes and use divs if possible. I'm guessing some fancy javascript would be required?
View 1 RepliesI have a specific requirement for a UI component that I am working on. I would like to make the component so that a designer can update a graphics in live preview mode whilst keeping the associated class the same.For example...ets take a button component which has an icon in the background and label. By setting an inspectable, I am able to set the label easily, but is it possible to point the icon to an image in say, the library or remotely etc? and have the image show as the background inside flash?[EDIT]Ahhh...I'm not able to load extenal files into the client so the graphic would have to be a library asset? Possible?
View 1 RepliesI have been working on a full flash website and am encountering a strange problem (or at least its strange to me).
I have the main shell of the site, which contains:The layoutNavigationA movieclip which pages are loaded into (external swf's)Some actionscript which streams in an MP3The controls for the background musicA piece of actionscript which loads an animated background (another external SWF)
I then have a series of pages in their own SWF's which get loaded into a movieclip within the shell when the user clicks the relevant button on the menu. Most of these pages contain:The panels for the content on that pageSome dynamic text areas for the text content on that pageSome actionscript which loads the content for that page from a couple of text files and populates the dynamic text areas Then there is a showreel, which has a menu and a customized FLVPlayback component to play audio and video tracks; the data for the menu and the tracks themselves are stored in XML files.
If I am using a connection over 2MBit: Initial preloader appears, shell loads, background music streams in nicely and then the content page is loaded in, panels animate in and the text content appears; all is well and its pretty quick.
If I throttle my bandwidth to below 2MBit (the main tests being done with the connection throttled to 1.5MBit), this happens: Initial preload appears, shell loads, background music streams in but takes a bit longer to start up, content page loads in, panels animate in and the content appears for about 2 seconds.
THEN the contents of the text areas disapears and the word "undefined" appears. So the content seems to be dropped. I've done some testing to identify the cause and if I comment out the code which streams in the background audio, the issue disapears and everything works fine, so it appears to be related to the audio. I will say, its not the most lightweight of sites; its quite graphically heavy (nothing too excessive though) and the background music is a 6MB MP3; the owner of the site is a movie composer so he has a lot of high quality streaming audio.
So I was wondering if anyone knows why this type of issue would occur, it seems strange that Flash would drop the content thats been loaded in, that background music would break the process.
I use Flash CS4 and most of the explanations you find online are for CS3.I used a mechanism once in HTML that set the flash site to 100% width, 100% height, which did scale it but there was no maximum limit and all the content got scaled equally. I would like to do it like in the HP above, where certain elements are differently scaled.
View 1 RepliesI am having an issue with adding dynamic content through an interval. The content is being added to the screen, but the X position, as well as the tween, seem to be completely out of sync. The below is a screenshot when the interval is at 100 milliseconds, as it shows it best. The application needs to work at 200 milliseconds (where the error is not as clear, but the lines are still occationally too close, roughly every 4th). As can be seen, there is a clear discrepancy between positioning. It remains fine for a few, then changes, changes again and then finally reverts back to what it was.
Here is my code that controls this section:
function XYZ(){
Score = 90
var timeBefore = Score
if(timeBefore <= 2.4){
timeBefore = 2.5
[Code] .....
Note: It also happens with 200 and 300 milliseconds, although less prominent.
I think this is easy question because i'am just start to learning flash and as. So how can i save a scene content into graphic file (jpg)?
View 1 RepliesThe images are uploaded with an html form onto the server and their path names are loaded into a .txt file for my flash AS to use.The problem I am having seems to be either server lag or browser issues (catching perhaps?).I manage my content via the CMS and once returning to the flash movie it is either old content, half working or just doesn't work, period.What is interesting is that once I locate the text file and view/refresh it manually, it works 100% fine. Now, it's obviously not a very useful set up if I have to manually refresh my txt files so is there a way, (php?, Java? etc?) to refresh these files?
View 5 RepliesWhat are the best practices for providing dynamic content within a flash site? I am trying to get my head around the idea and I am not sure how to think about this. Are there sites that use a graphic frontend for updating flash content? If so, what is the common way of doing this? XML? PHP+XML+SQL? etc. I am relatively new to all of this but I have been messing with Flash and XML. I can update stuff on my site by just modifying the XML but I want to go a step further now and create a frontend on the web where people could do this.
View 3 RepliesI have a sample.txt file which contain a single word and I need to put this word into a variable on swf.[code]...
View 5 RepliesHow to remove a loader and its content using removeChild or any other way, I had removed the loader but its content still playing in the background i know that from the sound of the content.this is the my code for removing:
removeChild(getChildByName("SampleLoader"));
how to make a simple flash 500x300 with a dynamic content from certain URL
View 3 RepliesI have dynamic flash content embedded into a Facebook fanpage. The flash file consists of an interactive environment where the mouse icon is substituted with a "flashlight" (i.e.spot of light), and the user "looks" around the dark room, lighting up the different areas with the light. When the light passes over certain areas (invisible buttons), specific "effects" are triggered and an animation ensues, along with an accompanying sound effect.It works great on the original webpage! But the Facebook page has some issues:1) The embedded flash file loads relatively slowly. I can deal with this, but the next issue is what is frustrating;
2) Everything works initially. The "flashlight" works. The background audio works. When the effects are triggered, the accompanying SOUND EFFECT works, but not the animation. After this, none of the effects will trigger. If I refresh the page, and let it load again, then everything will work.This is very frustrating, I can provide a link, if need be (I've had a somewhat similar problem on a website I designed with certain things loading a times, but not at others.
I'm developing a Flash application which is communicating with Javascript to allow more features such as custom html input etc., by placing an absolute positioned div on top of the flash application and controlling it's position etc. with Flash & Javascript.
Because these html elements have to appear above the flash content, I figured the following basic css would be enough to do the trick:
#flashContent {
position: absolute;
left: 0px;
[Code].....
So, the htmlContent has a higher z-index than the flash content and thus it should be shown above it. Unfortunately, this only seems to work when you set the Flash object's "wmode" parameter to "transparent".
The problem with this setting is that it's seriousely decreasing the application's framerate to an unacceptable amount.
For static content this does not seem to be a problem, however for my application there's all kinds of elements that you can drag around which have to be moved real-time (while moving the mouse).
So, how do I enable html content on top of flash content without using the "transparent" wmode parameter or how do I optimize framerate when using the "transparent" wmode parameter?
I have a menu whee you can choose a picture to lead, works great with first selection, but when you choose a different picture it loads over the last picture,I want to substitute the content of that movie clip not to load all the pictures in the same space. I treid to use clear() and removeChild(), but this only works when I choose pic1 then remove that to load pic2, is there an easy way to substitute the content for the new content?
View 1 RepliesI am a designer working in a flash file on the navigation part. The web site (is not yet posted) works fine but I need to change the contents when the menu is clicked (contact us, etc. ..). I need to find where the information is so I can change the address, phone number, info. but I have looked everywhere and cannot find it. Where could it be hiding?
[Code].....
I'm starting with AS3, i have a problem. I have a button, and inside the button i have a dynamic text field. The button is inside of a movieclip, the instance name of it is News, the instance name of the button is collegamento and the instance name of the dynamic text is Testo. So knowing this I'm triyng to change the content of the text using:
News.collegamento.Testo.htmlText="text here";
But Flash is giving me this error:
ReferenceError: Error #1069: Property
Testo not found on
flash.display.SimpleButton and there
is no default value. at
[code]....
I was wondering if there is a way to make the actual stage dynamic to the content loaded in the flash file.
Firstly the method I am using is importing a external swf to the stage into a container called container. The main stage, lets call it index, is still on default size, and I want this to expand dynamically as content is loaded in. page1 may be 900px width, page2 may be 500px width, and as I load the content the index stage should expand the width to that of the page loaded. Some steps I have tried but did not work.
if page1 button is pressed stage.stageHeight = 900; - not working (how do I set stage size in as3)made a movieclip in page 1 spanning the page size and called it p1_stage so I can reference the data from there. trace(container.p1_stage.height); gives this error: TypeError: Error #1010: A term is undefined and has no properties. at index_fla::MainTimeline/frame1()
how to load dynamic content (movies, text, or whatever...) in flash that automatically changes daily, depending on the day of week (mon.-sun.)?
View 2 Replies