tracking a slider's movement while a dynamic piece of media is playing (audio, video) and recording the time and new location of the slider. So if you were watching a 30 sec video clip, and you were rating it in real time, how to record the position of the slider and the time that you moved it? Ugh, if I should explain this better,
View 3 Replies
We are using FMS3.5 for VOD streaming. It's spotted that when we are using Flash Player Version = WIN 10.0.42.34/10,0,45,2, it is encountered that the video picture is hang but audio keeps playing after our commercial break point. we will first pause the video content and then use the same object to play the instream ad. After that, the video is resume when instream ad complete.
View 1 RepliesI have this sample code from the e-book: "Learning Flash Media Server 3". The purpose of the code is to create a FLV. The code is not running as it should. When I click on the 'record' button, the label is to change to 'recording', that dosen't seem to happen and also when I click on the 'Stop Record' button, I get the following error:
"TypeError: Error #1009: Cannot access a property or method of a null object reference.at MinRecord/stopRecord()"
[Code]....
My deduction is that the 'if' statement in the 'startRecord' function is not resolving to 'true' and hence the label is not changing to 'Recording'. Also I feel that the assingment to the variable 'ns' of type NetStream is not being done and hence in the function 'stopRecord' I get the above mentioned error message when I click on the stop button. How do I rectify these problems?
I ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
I built a timeline based player with 2 menus and many videos that you can play.The buttons move the timeline to a frame label and the video plays. The back button has a stop function built in it so the video stops playing when its hit.It plays wonderfully locally but once on a server after a few clicks it boggs down and sometimes the audio from the last video remains playing even when prompted to stop. I was pointed to use the add and remove child functions to prevent this but being very new to Flash and 100% self taught i have zero idea on how to do this. The link to the player is[url]....Even if its a link to a tutorial or something.
View 3 RepliesI am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 Repliesanyone know of some code that will allow the timeline to be scrubbed through using a slider -- similar to that of a quicktime / Media player slider used in video / mp3 players ??
View 4 RepliesI'm trying to build a simple portfolio website, which displays images and videos. I imported a video, and got it to play when a certain button is pressed. But when I press another button (to go look at an image, for example) the video's audio keeps playing. How do I make the audio stop whenever another button is pressed?
View 2 RepliesMy dillema is that on my site when you load a video on one page then click on another page the audio keeps playing. I've had a look around other topics but nothing seems to work for me. I've put in things like videosname.stop() with no success.
View 25 Replieswhen a video is playing..and i click a button to play to a different label in the main time line..the video component disappears but the audio keeps playing.. all so the volume component, the slider indicator stays stuck to the stage.. what AS3 is needed..to stop the audio and fix the indicator..
View 5 RepliesI want to stop my background music(audio) from playing when i click on a button which loads video[code]...
View 0 Replieshow to stop the audio playing from a video when you navigate somewhere else. However none of these solutions seem to work for me.I have my buttons on the root timeline, and all my pages are seperate movie clips which are added to the timeline with labels. I tried the
Code: Select allimport flash.media.SoundMixer;
SoundMixer.stopAll();
but i also have audio streaming on the whole site so when i navigate to a page the audio stops.
I'm trying to load a movieclip that has some video running on it using a page container dynamically on the click of a button. however im not able to get the audio from pausing even when this page has been navigated to another. The video gets hidden behind the newly called page however the audio still continues to play on the called pagethis is the code i wrote to add the movieclip(page) to the container..
var gp1:gpage1=new gpage1;
menu_cont.media_menu.press_review.addEventListener(MouseEvent.CLICK,mediaclik3);
function mediaclik3(event:MouseEvent ):void {
[code]....
Is it possible to capture video playing on your own flash site using netstream? I mean instead of capturing from a camera object. Capture video of something playing on your own site.
View 0 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I'm having the problem that my video, which sits in a movie clip, does not stop the audio after moving to the next frame, even though the video instance is removed. Here is the code from the main timeline:
import flash.events.MouseEvent;
next1_btn.addEventListener(MouseEvent.CLICK, ongoPage2);
function ongoPage2(Event:MouseEvent):void {[code]....
I am curious if there is a way to call back to the main timeline using AS3 after a video clip or audio clip that is being loaded externally, is done playing? For instance: you get to a page with a video on it, but when the video is done playing, instead of just sitting there, it automatically takes you to a new page (framelabel).
View 9 RepliesI want to set the bit rate of audio and video (48,96.128 kbps) at the time of live streaming . i m not using the flash media live encoder because i have to make it as web applicaton. can any one tell me how to set bit rate.
View 1 RepliesWe use a Flash component to allow a user on our web site to record from a Webcam on to our own Flash Media Server. The problem we are having is that the video in a 30 second FLV freezes at the 7th second but the audio continues. The video unfreezes after a couple of seconds but never catches up with the audio. At the very end there's a "Fast-forwarding" of video for the last few seconds so that at literally the last moment, everything's in sync. This happens for almost all of our recordings. Has anyone experienced this type of behavior?
View 5 RepliesWe have the Flash Media Interactive Serve 3.5. Is there an automated way to strip the audio from video files and stream on FMIS? .
View 2 RepliesI have been running FMIS 3.5 since April of this year. In August, we started recording conferences, but I'm not sure that this is the issue. We are under very low load at the moment. We never have more than one conference going simultaneously. Our server is spec'ed with a 64-bit operating system (MS08), 24GB RAM, and 24 processors.I notice that in some of our conferences, the video and audio freezes for 5 to 10 seconds. Then they recover and resume where they left off. When this occurs, it recurs every one or two minutes, which is very disruptive.People have to constantly repeat themselves.
FMIS is configured with defaults out of the box, with the exception that we are recording live video and audio. How do I solve a problem like this? Is it Internet latency? Is it our internal network? Is it FMIS 3.5? Not sure where to start.Now I've inherited much of the Flex 3 code that is used in the stream and player Flash components. I notice in the player component that the original programmer is using a timer to monitor the mx.Event.VideoEvent.STATE_CHANGED event. As long as the event fires, he resets the timer. But if 10 seconds expires and the STATE_CHANGED event has not fired, he restarts the player. Is this a valid methodology? Here is the code fragment.
<mx:Script><![CDATA[var lastUpdate : Number = 0;private var pulse : Timer = null;
private function onInit() : void {
viewVideo.addEventListener(VideoEvent.STATE_CHANGE, function() : void { if (!lastUpdate) { pulse.start(); }[code]....
I'm currently able to record audio and video (from a webcam) to a Flash Media Server. However, in some cases users have a webcam with no builtin
microphone. In that case the flash client uses the default microphone with 'Microphone.getMicrophone();' and possibly selects the micrphone of the PC.
A delay between audio and video is caused in cases with a separated webcam and microphone. There isn't a lot of delay on an internal network (e.g. LAN) however, there is a very large delay between audio and video on an external network (e.g. WAN).
I've a site where consumer can take a live meeting with the beauty consultant. The problem I'm facing is during the video chat. Basically there is a delay of 5 seconds between Video and Audio when I access the site from out of my network but when I access it within my network (VPN) then it's work fine.
View 14 RepliesIs it possible to dedicate separate bandwidth for both audio and video during for example video chat?
Basically my end goal is to give a minimum bandwidth to audio (so it has a minimum quality, at least), then the video will use the rest
I'm creating a video chat application, and no matter what combination of Camera/Microphone/NetStream properties and functions I use, I cannot get high quality video/audio. I get occasional audio latency, pixelated video, occasional frozen video and the degree of each depends on the combination of properties/functions I set/call.
Others such as TokBox, TinyChat, Chat Roulette, etc. have achieved great video/audio quality with FMS, what is the secret? At least point me in the right direction, because right now I'm not impressed with FMS ability to provide a good video/audio experience. BTW, I'm using a P2P mesh using a group specifier, not NetStream.DIRECT_CONNECTIONS.
I understand that the Flash Interactiver Server has this feature called 'Adobe Media Player Tracking Service' which the free version dosen't have. Any idea what ' Adobe Media Player Tracking Service' is and what it does
View 2 RepliesI'm new to Flash media server family. I need a server that can capture user recorded video/audio (through a flash recorder) and save it as a flv file on the server. which one of those server family is for me? I'm currently doing it using Red5, but would like to try out Flash media server as well.
View 1 RepliesWe have one functionality in which one user can communicate with the other user at the same time through flash media server3.5. In this fucnitonality we are catching stream from both end through camera and pass it to flash media server. On FMS side this streams gets stored also we are displaying those recorded flv files side by side to the corresponding user so that they can communicate with each other. In this situation we are facing a video and audio latency upto 1.5 to 2 sec.
View 2 RepliesI have a project I'm working where I need a single media player to be able to play either audio or video depending on what gets passed (flv or m4a).
PHP Code:
ExternalInterface.addCallback("playMedia", playMedia);
// The way a/v gets changed is from a dropdown menu in the HTMLvar av:String;
/ The param that gets passed to my playMedia function which will determine if its audio or video
var nc:NetConnection = new NetConnection();nc.connect(null);var ns:NetStream = new NetStream(nc);ns.client(this);
[Code] .....
How do I add the audio to the container in such a way that it 'replaces' the video that's in the container? I may want to add a static image as a visual representation.*/
ns.play(av);
}}
I'm trying to record a stream from a webcam using FMS4 developer edition. The streams are recording on a linux box in .flv files. These files though have problems.
1 - The video quality is terrible. Fuzzy/blocky. Any kind of motion looks awful. Is there any way to improve this?
2 - The sound jumps/skips and goes out of time with the video.
As it is now this is useless. I am trying to make a system where a user records a short video from the camera and then I upload it to YouTube from my server. If you use Youtube's webcam page the video quality is quite acceptable and the audio is obviously in sync too, so they must know something I don't. [URL]..
