When ever I test my project it comes up with "ArgumentError: Error #2108: Scene Bio was not found." Here is my code:
navMenu.navBio.addEventListener(MouseEvent.CLICK, navBio1);function navBio1(event:MouseEvent) {gotoAndStop("BioPlay","Bio")}
I am a new student and recently I am getting this error in every program that I write or import into Flash:
ArgumentError: Error #2108: Scene * was not found
at flash.display::MovieClip/gotoAndPlay()
at _5_fla::MainTimeline/clickPlay()
It doesn't matter what the scene name is because I have tried cutting and pasting the scene name from the scene window and it happens on every button in every program..
[Code]...
i have a game im making but it is useing scenes to navigate between pages. every time i click on a button i have created, it gives me this code:
ArgumentError: Error #2108: Scene subnav was not found.
at flash.display::MovieClip/gotoAndPlay()
at buttontesting_Fight_fla::ryusrevenge_17/mv1()
it does this for every scene i have. I even made the buttons in the begining and made them invisible so that they were in the entire time line but not usable or seen till the end of the time line. I dont know what could be going wrong.here is the rest of the code i have for one of my scenes.
import flash.display.*;
import flash.events.*;
import flash.display.FrameLabel;
[code]....
I'm having trouble jumping to another frame (15) in the main stage named "main" when closing a movie clip on frame 10..
ArgumentError: Error #2108: Scene main was not found.
at flash.display::MovieClip/gotoAndPlay()
at welldone_mc/nextlevel_function()
the actions are as follows:
stop();
nextlevel_btn.addEventListener(MouseEvent.CLICK,ne xtlevel_function);
function nextlevel_function(evt:MouseEvent):void {
gotoAndPlay(15, "main");
}
i've tried labelling the frame, but the problem seems to be locating the scene "main"?
The code below works fine in CS3. But I get the following code when I try to run it in CS4:
ArgumentError: Error #2108: Scene Scene 2 was not found.
at flash.display::MovieClip/gotoAndStop()
at
introActionscriptWorkFile_Scene1_fla::MainTimeline/gotoScene2()
Here is the code: (Note: "scene2Frame1" is a frame label).
The code below works fine in CS3. But I get the followingcode when I try to run it in CS4:
ArgumentError: Error #2108: Scene Scene 2 was not found.
at flash.display::MovieClip/gotoAndStop()
at
[code].....
I've just started self-learning Flash, so am not very familiar with it. I tried to do a game e-card and there were some problems which i couldn't find an answer for them after hours googling: I'm using Flash CS5 AS3. So I'm trying to create a button that would lead to another scene, i named it "ok button" (instance - "ok_btn") and the scenes are just "scene 1" , "scene 2"
[Code].....
Code:
addEventListener(Event.ENTER_FRAME, Pixel_Perfect);
function Pixel_Perfect(e:Event):void
{[code]....
Enemy1 is a class is that makes a difference
I didn't write this code as i am not this advanced yet but really needed this script, this script normally works but now i am recieving errors
Error: ArgumentError: Error #2015: Invalid BitmapData.
at flash.display::BitmapData/ctor()
at flash.display::BitmapData()
at IceMountain_fla::MainTimeline/Pixel_Perfect()
I keep getting them, and can't figure out where or why I'm getting them.Here's the full error reports:
ReferenceError: Error #1065: Variable EverybodyEditsBeta is not defined. at global/flash.utils::getDefinitionByName() at Function/<anonymous>()
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
[code].....
I'm getting the following error after testing my Flash game's code:
ArgumentError: Error #1063: Argument count mismatch on RestartButton(). Expected 1, got 0.
at flash.display::Sprite/constructChildren()
at flash.display::Sprite()
[code].....
I am trying to use the onMouseWheel methodFirst I wanted to check if my event listener and event handler work
stage.addEventListener(MouseEvent.MOUSE_WHEEL, onMouseWheel);
private function onMouseWheel():void {
trace ("onMouseWheel() method");
[code].....
When i press a certain button in my exported flash (swf file), i get this error message:
ArgumentError: Error #2108: Scene scene 10 was not found.
at flash.display::MovieClip/gotoAndStop()
at create_fla::MainTimeline/mouseDownHandler2()
And the code for that certain button that i pressed on is
[Code]...
I've got a problem in an ItemRenderer in Flex 3.5. I've looked at the other posts regarding this error but still can't figure it out. The ItemRenderer is part of an AdvancedDataGrid who's data provider is HierarchicalData. I'm getting the ArgumentError but the trace doesn't go to any of my code. I've gone through in debug mode tons of times but it looks like it doesn't happen until after my code runs. Quite strange.
The item renderer has a couple different parts. It figures out what row it should be drawing for based on the xml data and then adds labels and sprites appropriately.
Here is one of the methods that gets called if the itemrenderer is on a certain row.
private function addLabels(planList:ArrayCollection):void {
height = 0;
var sprite:Sprite = new Sprite();
var curX:Number = (width / planList.length);
[code].....
I am having problems loading a bitmapData. I am getting the following error
Engine Init //trace
loadimage//trace
ArgumentError: Error #2015: Invalid BitmapData.
[code].....
have an ERROR message is
Code:
ArgumentError: Error #2126: NetConnection object must be connected.
at flash.net::NetStream/ctor()
at flash.net::NetStream()
at videoplayer1_fla::MainTimeline/initVideoPlayer()
[code]...
where to put the rtmp server path? and changes.
I believe I'm not alone in this problem but I don't see any answers in any of the forums.I have a movie clip that has a button that I wish to take me and play my first scene at frame 1.I labeled my the 1st frame "startLabel" and my scene is named "mainScene", and that's where I want to go from my "button" that is placed in my "movie clip symbol scene".
[Code]...
I have a ERROR message is
[Code]...
Below code is xml playlist included. But i want to play videos through "rtmp server". My On-demand Video Player Code
[Code]...
I have an air application that loads an external swf when prompted by the user. In the external swf, I have a class that loads all the necessary fonts for that particular swf. When my air application attempts to load the swf I get ArgumentError: Error #1508: The value specified for argument font is invalid.
View 1 RepliesI am encountering the following error message whenever I compile my project in Adobe Flash CS4:
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display::DisplayObjectContainer/removeChild()
at stageRotation/spawnParticle()
[Code].....
I'm working on adding a difficulty setting to my platofrm-type game but I got an error and cant figure out what's actually wrong. I'm trying to click anywhere on the stage to take you to the next scene.The error says:
ArgumentError: Error #1063: Argument count mismatch on LevelKey(). Expected 3, got 0.
at flash.display::MovieClip/gotoAndPlay()
at Engine/NormHandler()[Engine::frame3:55]
ArgumentError: Error #1063: Argument count mismatch on Engine/startGame(). Expected 0, got 1.
And my entire code for the scene is:
Code:
stop();
stage.addEventListener(MouseEvent.CLICK, startGame)
function startGame ():void {
[code]....
im aworking on a game. There are 6 tables in the game. when i click on a table, a box pops up(done by addChild).There is also a code that spawns people randomly to sit at the various tables. The code extends a mc that contains all the people(personholder). The when i play the mc, the menu appears to be behind the people and i cant click it.It also results in an argument error in the output. I fixed this by adding this line:
Root.addChildAt(guy1,Root.getChildIndex(Root.main)-1);
after this line:
Root.addChildAt(guy1,Root.getChildIndex(Root.quizc ont)-1);
main is my table container.quizcont is my quiz container. these lines are to make the quiz and table/menu clickable. however, thay also appear in front of the people. how do i send them back? also, i get the arguement error after sometime, but it does not affect gameplay.
var loaderContext:LoaderContext = new LoaderContext();
loaderContext.applicationDomain = ApplicationDomain.currentDomain;
var loader:Loader = new Loader();
[code]....
in the server all is working good.compile from local Main.as heres my error
ArgumentError: Error #1508: The value specified for argument font is invalid.
at flash.text::Font$/registerFont()
at Fonts$iinit()
I have seen a few posts on this topic and I have tried wrapping the lc.connect attempt in a try/catch block. My goal is to be able to open my app (a cfm in which swf's communicate w/ each other using localConnection) in multiple browsers without receiving this error.
View 0 RepliesI have set up a series of buttons that show an image when rolled over and then the image disappears on roll out. A sample of the code I am using is below:
costume_btn.addEventListener(MouseEvent.MOUSE_OVER , loadCostume);
function loadCostume (e:MouseEvent):void {
var newCos:feather = new feather ();
this.addChild(newCos);[code]....
It works fine first time through but on roll out the second time you visit any button it gives me the following error message:
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.at flash.display:isplayObjectContainer/removeChild()
at MethodInfo-12()
I have written this code to remove a movieclip calledspaceship once it reaches its 40th frame. The code actually worksfine and the spaceship is removed but after the spaceship isremoved i get this error -ArgumentError: Error #2025: The supplied DisplayObject mustbe a child of the caller.at flash.display::DisplayObjectContainer/removeChild()at SpaceGame_fla::MainTimeline/removeSpaceship()
View 3 RepliesI am getting this error
PHP Code:
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display::DisplayObjectContainer/removeChild() at MethodInfo-164()
Here is my code just a simple removeChild should work.. but it gives me an error.
PHP Code:
function homeScene2(event:MouseEvent) {trace("button clicked");removeChild(imageText);removeChild(thumbHolder_mc);thumbHolder_mc.removeChild(imageLoader);removeChild(imageLoader);gotoAndStop(1,"1");}
is there a simple way to remove all Children in one shot without so much code like this? Could a simple removeChildren work?
here is a look at the children in the same code..
PHP Code:
addChild(imageLoader);thumbHolder_mc.addChild(imageLoader);addChildAt(thumbHolder_mc, 0);addChild(imageText);
I'm working on this website and I'm dispatching an event from the document class to another class that is suppose to bring and handle a form when the user asks for it. The thing is that the event gets dispatched and everything but for some reason if I leave the the form Movieclip on the stage i get this error "ArgumentError: Error #1063: Argument count mismatch on FormClass(). Expected 1, got 0."ime.
View 9 RepliesI'm trying to send an event between a loaded swf and the swf its loaded into but I'm getting the following error.
ArgumentError: Error #1063: Argument count mismatch on one/eventResponse(). Expected 0, got 1.
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at two/test()
I don't understand where this extra argument is coming from. The code is below:
//one.as
package {
import flash.display.MovieClip;
import flash.net.URLRequest;
[code].....
I'm trying to load a swf onto my stage and I'm having some problems with the event handler. I'm getting an error: when I comment out the event handler, it returns no errors, I've tried the function both with and without void, but it doesn't fix the error. I know this should be an easy fix, but it's got me stumped.
[Code]...
The following coding works fine when the Child is present on the stage. However there are times when the Child is not on the stage.Under those circumstances when then function is called I get this error.
[COLOR="Red"]ArgumentError: Error #2025: The supplied
DisplayObject must be a child of the caller.
at
flash.display::DisplayObjectContainer/removeChild()[/COLOR]
[code]....