I'm loading a swf to my main stage and im adding a child to a childMovieclip in the loaded movieclip
but when i play the loaded swf and it goes back to frame 1 and starts plating again the changes i made aren't there?
I am running a for loop to bring in movie clips from an array, and I have a couple buttons that I want to affect the properties of all of the mcs. The buttons (labelsOff_btn, labelsOn_btn, increaseSize_btn, decreaseSize_btn) are only affecting the second-to-last item on the list, although the drag functions targeting the same mcs (thIcon) are working for everything. Code is pasted below:
[Code]...
If you load an external swf and after it is totally loaded give it as to change size properties. the file jumps from his size exactly to the pretended. How do one give code to do this in a progressive way.
View 1 RepliesJust been playing around with the tutorials, on the Set properties/Get properties. Everything is all cool, except the "instance name" aspect. I dnt really understand that too well. Is it possible to change an Mc Name dynamically? If you look at my FLA when you hit the top left red button you will get a trace of the mcName as "square". Now if you input a new mc Name on the right hand side, you will see it change on the left hand side. But i want to know why it doesnt remain as the new mc Name, it still goes back to square.
View 3 RepliesWhat I did was simple: I loaded a swf into an empty MovieClip[code]...
background.swf's stage was set up with 300X200 aspect-ratio, but it was further larger than that size when I tested it.[code]...
I was doing a project for class and all of a sudden i cannot change anything in my brush properties except color. the stroke, style, scale, cap, join is all locked. i was using it fine earlier and it works for all the other tools but only the brush isnt working.
View 1 RepliesIs there a way to change a graphic, but keep the properties across frames such as size and positioning, so that the new graphic does everything the same? That's pretty much all I can ask since I don't really know where to start.
View 1 RepliesIs it possible to change the background of a certain layer in flash using code.
View 4 RepliesWhat I have done is create a preloader that loads an SWF file. I used the same preloading technique used at this site [url]...
What I want to do is when the browser window resizes I want to change the swf files height and width properties to the size of the window.
Is this possible or should I approach the preloader differently so that my main swf gets loaded by the browser so I can use javascript to change its properties.
I have a text whitch I created with: createTextField command. Somehow I figured out how to change the text's color and size but I'm still not able to change it's font although I used the command text.textFont=arial; (I used Arial too).
Basically I wanted a list with command that you can change text properties..
how do i make a movie clip move right 5 pixels every time i press SPACE with actionscript 3?how do i change under properties for input text box, paragraph, behavior and make the password characters be black circles or dots instead of asterisks in flash cs4?how do i take a screen shot of the microsoft windows login screen when I switch on the computer?how do i test movie in full screen in flash cs4 or publish it in internet explorer and have the trace("blah") command or output shown there?
View 2 RepliesI'm loading a bunch of AS2 SWF's into a main AS3 SWF. How do I access the properties of the AS2 SWF's from the AS3 SWF? Or is that not possible?
View 3 RepliesI have come across a problem where an SWF that I've developed has to be loaded by another SWF that pans and zooms the inner swf. I have created these two MovieClips to demonstrate my problem, I've called them Inner and Outer. These are the document classes for them:
ActionScript Code:
package inner
{
import flash.display.MovieClip;
[Code].....
I dropped a button component into the stage of the Inner.fla file and named it btnOne in the properties window. The Inner.fla runs as expected on its own. When I include code in the OuterClip class to instantiate an InnerClass variable it complains thus:
1120: Access of undefined property btnOne.
So I can see that there is an issue here to do with linkage ?? I've tried quite a few different settings but feel like I am just guessing and have been struggling with it for a while. In my final scenario the outer file will have timeline and actionscript frames with no document class. Is it ok to mix these two methods of scripting?
how to adjust the size (width*height) of a externally loaded movie?
View 12 RepliesMy goal is to do various things to a movieclip (zoom out with an alpha change) that has a jpg loaded into it. My thought is that I can load any jpg into the movieclip, and it will follow the commands made to the movieclip (i.e. zoom / alpha change).I am at the point where I am setting up the movieclip properties. Some of the questions I have are: is it possible to constrain the movieclip to a particular dimension, regardless of the jpg size. The jpg would then, ideally, need to be told to center within the movieclip, and the excess picture be cut off. Here is what I have so far: [code]For some reason the mc will no longer show up, and the traces come up as unvalid when I add the width and height dimensions, otherwise the picture will load, but at its original dimension.I was wondering if there was a tutorial explaining some of the concepts of mc's and loading images.
View 1 RepliesHow would i go about changing properties of a Combo Box?
There are two things I would like to change that differs from an orginal Combo Box.
1. Make it so some of the labels within the Combo Box are unselectable, yet are still displayed.
2. Make the colour of certain labels different.
I currently have a scene in Flash CS4 that consists of an image layer1 (converted to a motion tween), image layer2 (converted to a motion tween), an actionscript 3.0 layer, and a hotspot layer. Let's say the animation is 10 frames long for simplicity. At frame1 I want the visibility of image layer 1 turned on and the visiblity of image layer 2 off. Then, I want to spin image layer 1 and 2 simaltaneously (I know how to do this with motion tweens of course) but mid-spin, say at Frame 5, I wish to turn on the visiblity of image layer 2 and turn off the visibility of image layer 1.
How do i change the visiblity properties of my image layers with actionscipt? I assume there is a class I need to load and then change the properties of the image layers in the actionscript layer at the corresponding frames I wish those properties to change.
I have 4 mc's that are acting as btns inside an mc on the main timeline...[code]there are 3 other mc/btns and all come up at different frames in mainbranch_mc (mainbranch_mc is on the main timeline)
first question, if I add the above codes to each mc at the beginning or end of mainbranch_mc I get a null error, so the only way I do not is if I add actions to the frames the buttons start in. (is this correct?)
second question, since btn mode is true I do not need to change the mc properties from mc to button correct?
last question, since newolivefour_mc and the 3 other btns (which I did not list are all inside the branch_mc timeline) how and where do I code so the btns when released to getURL's.
if you can set and change different properties of a graphic symbol using AS? I know you can change MC's and buttons. I also know that you can change graphic symbol properties using the prop inspector. I was thinking that since you can change properties like _alpha in the Prop Inspector, how to you set and control them using AS.
View 3 RepliesI have say 50 movie clips on the stage. each has a name like "button1", "button2" etc and I want to move each one using a for loop instead of hard coding "button1._x = 50"
When I try this it doesn't work.
Code:
var buttonName = "button1";
buttonName._x = 50;
I want to load an image, and then change widht and height of this .jpg. So I'm making something like this:
Code:
_imageSprite = new Sprite();
var imgRequest:URLRequest = new URLRequest( "data/image.jpg" );
var imgLoader = new Loader();
[Code].....
Even if I try to get _imageSprite.widht, I'm getting 0? Why?
Maybe I'm doing something wrong? Because I need to get width and height of this image. Also to change this properties.
Does anyone recall how to change the color of the text and the background box when one clicks and drags over text in an input textfield?
View 3 RepliesSo I draw a line using the graphics object on a Shape or Sprite, using something like:
Code:
mySprite.graphics.lineStyle(1, 0x333333, 1, false, LineScaleMode.VERTICAL, CapsStyle.NONE, JointStyle.MITER, 10);
[code].....
I need to move a 3d transformed object (ex. image) from x=0 to x=500 (for example)
The problem is that the 3d transformation changes along the movement.I want to constrain the 3d transformation so the image distortion (perspective) doesn change.
Is it possible to access the properties of an image when it's been loaded in to an swf?
I am thinking of the properties which can be edited and displayed in the Windows directory listing.
The image 'contents' field could then be used as the caption for the image viewed in flash.
Main movieclip onstage is : design_mc. Within it is a movieclip already in place onstage with an instance name clipart_mc.also loading a ListBox to the stage and each time a selection is made from listbox myLoader9 is used to load selected .swf intodesign_mc.clipArt_mc.Now within each of the .swf files loaded into design_mc.clipArt_mc there is a mc ike to color transform called color_mc.So now the listbox is onstage and I make a selection that places heart.swf inside of design_mc.clipArt_mc. I want to access heart.swf so I did this:
var child:DisplayObject = myLoader9.content.contentLoaderInfo.content.color_mc;
var colorTrans3:ColorTransform = new ColorTransform();
var trans3:Transform = new Transform(child);
[code].....
I'm making a modular site, that loads in external swfs that need to have decent screen reader names for each of the buttons.
The shell swf is set up to work with Thunder and NVDA screen readers by creating an AccessiblityProperties instance and assigning it to the relevent display objects then calling Accessibility.updateProperties( ) ; This method works in the main swf, but when used in the loaded swf it's not picking up the updated accessibility properties of the buttons, even though Accessibiltiyy.updateProperties( ) ; as been called again.
If I have a swf that's being loaded into other peoples' swfs (which I have no control over) is there any way I can get properties from the stage (such as height, width, fullScreenHeight, etc.) or does this have to be exposed by the loading swf?
View 1 Repliesi'm following a tutorial but modifying it to suit what i'm trying to do, basically the tutorial sets the X of each image upon loading but what i need is for the X of the image to change according to the position of mouseX
since cvItemLoader is a variable inside of the cfAddItems function i can't change the image's X from outside the function, at the same time i can't possibly define the variables outside because the total number of images will vary
here's my codes :
var cvTotalThumbs:Number;
var cvXMLList:XMLList;
var cvMenu:MovieClip;
[Code].....
I have the following AS3 code. I'm just beginning and have gotten on this since finding it here: (take out the spacesloadingData.phpNow, I find out that I cannot access the properties of the loaded movies because they are AS1 or AS2. converting this to AS2?
Code:
import fl.containers.UILoader;
var ar_movies:Array = new Array();
[code].....
