If I have a swf that's being loaded into other peoples' swfs (which I have no control over) is there any way I can get properties from the stage (such as height, width, fullScreenHeight, etc.) or does this have to be exposed by the loading swf?
View 1 Replies
I have an object on my stage, called obj.I also have a class called "Physics" which contains a bunch of methods for physics, such as inertia, gravity, and bouncing off walls. In order to do some of these,I need access to the stage.stageWidth and stageHeight properties.My code is as follows:
public function wallBounce(obj)
{
this.stageRef = stageRef[code]...
This is supposed to check if the object's x value is greater than the stageWidth or less than 0. When I run this code it says:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
I am a semi-newbie programmer who is completely self-taught and have no clue what is causing this. I spent a bit googling it, and I think it has something to do with scopes,.
I'm loading a bunch of AS2 SWF's into a main AS3 SWF. How do I access the properties of the AS2 SWF's from the AS3 SWF? Or is that not possible?
View 3 Replieshere is my code
Code:
package
{
import flash.events.*
import flash.display.*
[Code]....
does it have to do anything with ADDED_TO_STAGE event?
Main movieclip onstage is : design_mc. Within it is a movieclip already in place onstage with an instance name clipart_mc.also loading a ListBox to the stage and each time a selection is made from listbox myLoader9 is used to load selected .swf intodesign_mc.clipArt_mc.Now within each of the .swf files loaded into design_mc.clipArt_mc there is a mc ike to color transform called color_mc.So now the listbox is onstage and I make a selection that places heart.swf inside of design_mc.clipArt_mc. I want to access heart.swf so I did this:
var child:DisplayObject = myLoader9.content.contentLoaderInfo.content.color_mc;
var colorTrans3:ColorTransform = new ColorTransform();
var trans3:Transform = new Transform(child);
[code].....
I have the following AS3 code. I'm just beginning and have gotten on this since finding it here: (take out the spacesloadingData.phpNow, I find out that I cannot access the properties of the loaded movies because they are AS1 or AS2. converting this to AS2?
Code:
import fl.containers.UILoader;
var ar_movies:Array = new Array();
[code].....
My movieclip clipArt_mc receives movieclips that are loaded dynamically from a listbox selection using:
[Code]....
I would like to access the nested or loaded in movieclip inside of clipArt_mc that has in it a movieclip named color_mc so that I can apply color directly to it instead of clipArt_mc.
How would you go about calling the public properties and methods of a SWF you load in actionscript?
I have been using stackoverflow for years to answer my programming questions so I wanted to give back by writing a guide to an issue I had a lot of trouble figuring out. This is my first user guide so tell me if there is anything I can do to improve it.
How do I access Stage Class properties in Custom Class?
Class:
package {
import Main;
import flash.events.*;
import flash.display.Sprite;
import flash.display.Stage;
public class Run extends Sprite {
[Code] ....
Output:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
Class called 'bg' dynamically creates a background that varies depending on the stage width & height.
Code:
package
{
[code]....
what I'm trying to do is accessingsnapText = scrollPane.source.textSnapshot;from an external swf. I've tried:
trace("-->: "+scrollPane.source.textSnapshot.getText(0, 1000));
trace("-->: "+myLoader.content.textSnapshot.getText(0, 1000));
trace("-->: "+mc.textSnapshot.getText(0, 1000));
[code].....
I have a Flex project where I am loading in 3 external swf's. Each of these swf's represent their own projects, each with its own stage. In each of these sub-projects I reference their stage from within, but this does not work once they are loaded into the Main.
I eventually got the contents to display, realizing that stage will return null unless ADDED_TO_STAGE is complete in externally loaded swf's. Unfortunately the way I did it, I am now adding to the Main's stage instead of the swf's stage.
Code:
public static var mainStage:Stage;
public function Program()
{
[Code].....
I assuming that even though i'm in Program.swf, this.stage is still referring to the parent swf?
I have a getter within a class which is used to make my property skin:DisplayObject read-only. This class also has a property body:AvBody which is used to define the x y width height etc of the object, which in turn positions the skin.
What I want to do is disable access to the properties x and y on skin unless accessed from within the internal namespace (where AvBody is also located) Is this possible?
Note: I can't make skin any type other than DisplayObject (I can't even make skin a class that extends DisplayObject because it creates issues with library symbols).
I have 2 movieclips. One is a fairy flying up the stage. The other movieclip is a magic dust, which is originally designed to generate magic dust with onMouseMove event, based on the mouse's x & y. I want to change the the magic dust movieclip so it will generate magic dust following the fairy's movement.[code]...
View 2 RepliesI'm following tutorial here http:[url]....This is my code in main.as
package {
import flash.display.Sprite;
import the CheckBox class[code]....
When I test it says Access of undefined properties response_txt.
I am using flash CS3 with ActionScript 3.0. Suppose, I created a button component and a Combo-box component. Hence, SWF file consists of a Button and a Combo-box component. Now, my requirement is, How to access the instances and properties of these components(Button and Combo-box), so that I can create HTML webpages depending upon the Combo-box selection and the Button click events occurred on flash components? Here, we need to pass/send the flash components' instances to HTML. How can we do it? All I want is to access the flash components in HTML.
View 3 RepliesGiven this:public namespace foo;foo var bar:String = "baz";We can access the property "bar" like so:[code]It gives me the following error: ReferenceError: Error #1069: Property foo::bar not found on MyClass and there is no default value.On further inspection of the foo namespace I can see (in the debugger) that the URI is in the format {package}:{type}/{name}. If I try to replicate this by doing the following:[code]Does anyone know if it is possible to get access to namespaced members like this? I don't have compile time access to the namespace, but I can look up it's uri (and prefix) dynamically at run time.
View 1 RepliesI'm making a modular site, that loads in external swfs that need to have decent screen reader names for each of the buttons.
The shell swf is set up to work with Thunder and NVDA screen readers by creating an AccessiblityProperties instance and assigning it to the relevent display objects then calling Accessibility.updateProperties( ) ; This method works in the main swf, but when used in the loaded swf it's not picking up the updated accessibility properties of the buttons, even though Accessibiltiyy.updateProperties( ) ; as been called again.
My aim is to access the FileReference class Flash Player 10 properties,methods and Events using CS3 instead of CS4.For load() ,save() methods needs runtime version of Flash Player 10.I need to include the flash player 10 in CS3 publish settings Version.Otherwise you can suggest how i can able to access the FileReference class new properties and methods without CS4.
View 1 RepliesI am developing a Jigsaw puzzle in Flash. I am developing a class for puzzle piece. The code of the PuzzlePiece class in given as follows.
package
{
import flash.display.MovieClip;
import flash.events.MouseEvent;[code]....
I will be choosing which mask to use based on users selection of puzzle piece.When I try to use traingular mask by adding puzzle.gotoAndStop(2) the swf just flickers. Thought the holder_mc and mask_mc are exactly of same dimension one comes below lower than other though I have not altered the position of the clips within a puzzle piece.If you want to take a look at my fla here it is https:[url]....How to go to a specific frame 2. Why is position of two clips inside the piece changing
I have made a very simple swf in which I have a MovieClip which I have rotated on the stage. When I try to access this rotationX and rotationY properties of this clip using the constructor of the class assigned to this MovieClip they are coming back as 0 even though they shouldn't be. If I put an on rollover event of the MovieClip and trace out these properties here I get the correct values.
package {
import flash.display.MovieClip;
import flash.events.MouseEvent;
[Code].....
I also get the correct values when I read the values from the stage timeline.
trace ("TEST "+testMC.rotationX+" "+testMC.rotationY); //returns correct value
Is there a specific event I need to be waiting for which will tell me when the 3d properties are available via ActionScript?
So I have a movie clip associated with an external class in the linkage dialog. I put that movie clip on the stage. I have another external class that contains some code (not for the movie clip but for the stage). When I access the custom properties of the class in the actual flash file (not the external code) everything works fine.For example.myMovieClip.explodeTheCode = true;works in the main movie. However, it doesn't work in the external flash file when I have a reference to that movie clip.myRefToCustomMovieclip.explodeTheCode = true fails!It throws an error. In java, I'd just import the custom class the movie clip is linked to and then I can call all the extra custom methods on the movie clip in the external class I want. However, this does nothing. I still can't access any properties.So my question is, how do I access the custom features of a movie clip (that is linked to a custom class) from an external code file. It works in the movie, but not in the external source code.
View 0 RepliesI am creating a Flash training app that includes a glossary. You click a button and the glossary opens. The glossary loads thus:
PHP Code:
var request:URLRequest = new URLRequest("glossary.swf");
var loader:Loader = new Loader()
loader.load(request);
swfCont.addChild(loader);
The glossary has a scrollbar, and that scrollbar has this listener (among other things):
PHP Code:
scrollbar.addEventListener(MouseEvent.MOUSE_UP, stopScroll);
Once the glossary is loaded into my app, if I do a MOUSE_DOWN on the scrollbar and then drag the mouse away from the glossary, onto the parent stage, then when I do a MOUSE_UP on the parent stage, I need to dispatch a new MouseEvent.MOUSE_UP event to the scrollbar in the glossary swf.
How do I access the scrollbar of glossary.swf in my dispatchEvent? In other words, in the following code in the parent:
PHP Code:
stage.addEventListener(MouseEvent.MOUSE_UP, glossarySBMouseUp);
function glossarySBMouseUp(me:MouseEvent):void {
xxx.dispatchEvent (new MouseEvent(MouseEvent.MOUSE_UP));
}
I have a movieclip in the library with the linkage name:BackgroundClip, so in the constructor I create it, add it to the display list and can even access and modify its properties, which I tested with the x position. Now what im having issues with is getting the stage resize listener to adjust the BackgroundClip instance, bg, to the stages width and height. In the clip is an image, so if someone has a better way of using classes to create full screen liquid gui im all ears![code]
View 4 Replieswhy I cannot access the alpha property of the mc called 'newImageContainer' below? (This is just an extract of the code):
Code:
var newImageContainer = new mcGroupItemHolder();
var newMc_thumbnailBG = new mc_thumbnailBG();
[code]......
I have following datagrid[code]...
I want to send a name of opponent to a webserver after Delete button is clicked. Can I access correspondent value in datagrid on click event?
I have a calendar where each day is a movie clip called 'day'.I use calendar1 movie clip as a parent to day, which means day is inserted into calendar1 using this line..the issue is that I can't access any of the checkbox properties, but all of the text properties as illustrated below.[code]
View 0 RepliesI need access to the properties of a file I load on the next line. Specifically, trying to pull the _height and _width off of it.
I think it's being bungled up because it's inside a function running two (nested) for statements. Let me post up the code for you geniuses[code]...
The width traces fine in the onLoadInit, but only AFTER the function that is creating and positioning the movieclips is finished running. They are nested in something of a complicated heirarchy so to save the widths in another array and then try to move them all later would be bonkers.
Let me just start by saying this forum is awesome, over the past 3 years I've found nearly all of the answers to my AS questions without posting once... That streak ends today.I'm building a site where the client is going to be able to upload various backgrounds which load depending on which tab they click on.
The class is BigBackground.as. It does the loading of the backgrounds, and then in the .fla I would like to manipulate these "BigBackgrounds" starting with the width. However, even though the width traces correctly from BigBackground.as, the width traces to 0 from the .fla file. I can access width from the class, but how can I access the width & height from the .fla?[code]...
I'm new to as3 and I was trying to make my own slider for a while until I found the slider component. The slider component is so perfect for what I want to accomplish. But the size of the little graphics is ridiculous. If you click on the line that the slider knob is on top of the knob will snap to where you click. This is great but with only 3 pixels of height to click on it's pretty much useless. I tried going into the slider movie clip and altering the individual graphics but when I run the program the sizes are back to their teenie tiny size.
View 1 Replies
