I tried to display HTML content in a text field using its htmlText property.But it is not displaying correctly.I have attached here my current output (incorrect.jpg) and how it should looks like(correct.jpg).
Here is html data
Code:
<html>
<head>
<title>CISnet - Errormessage</title>
[code]....
found that code to display html format text to dynamic textfield in as3:
var url:String = "http://edeejay.dyndns.org:8000/currentsong?sid=1";
var loadit:URLLoader = new URLLoader();
loadit.addEventListener(Event.COMPLETE, completeHandler);
[code].....
what I am trying to do is to load HTML content from an XML file and put it in a TextField object I create dynamically. After all this is done, clicking on a button fades the TextField object out and another TextField with new content appears.I've got the whole process working fine, including the fading. And to get the fading to work, I've actually had to set my dynamic TextField objects' embedFonts property to TRUE.Now here's the hiccup:
When embedFonts is FALSE, Flash displays the TextField's HTML content properly. The text flows properly and looks as expected. The only downside is that the fade effect doesn't work.When embedFonts is TRUE, the fade effects works perfectly, but Flash displays the TextField's HTML content with a bunch of extra spaces between some of the letters. The line height seems to be different also.The odd thing is that when I debug the code to look at the styles, in both instances of embedFonts set to TRUE or FALSE, the styles are exactly the same. But Flash is rendering the HTML with different kerning and line height in each of the scenarios.
I am looking for a very basic html editor (similar to the one being used in this forum to make entries - only more basic)...which ONLY uses html tags supported by the AS2 textfield....
View 1 RepliesIs there any way to display flash objects which are outside the display area when flash is embeded in HTML
The reason i ask is my current project has a rotating + enlarging effect which is largely dynamic so sometimes an object may clip the edge of the stage areathis looks messy but i dont want to increase the stage area to cover the largest possible area any object could enter because most of the time the objects are at the center and small so i would end up with a lot of white space
i have attached the fla and xml file. i need to display the html embeded in the xml and display in the flash.
View 0 RepliesI have created a textArea element but cannot display my HTML content. If I just display regular text it works or if I change the textArea element to a RichEditableText element it works fine. Since this is for a mobile app I would prefer to use the textArea element as recommended by Adobe.Here is the MXML code for the textArea. All I get is the border and no content displayed.
<s:TextArea id="myHelp" editable="false" width="100%" height="100%">
<s:textFlow>
<s:TextFlow>[code]..........
i have this code (from another thread), which was got through the support of fellow geniuses on this forum but they showed how to put this into a textfield, which is what i want to do, but they showed how to do it before I made it display just the news feeds. So when i tryed to add what they taught me to this code BAM FAIL! So im asking one more/THE LAST TIME for the support from the forum to display this.
[Code]...
Im making a swf that makes a Tween of 3 textFields, when i export it for flash Player 10 it works right. But as soon as i export it for Flash Player 9 or play it on a machine with Flash Player 9, everything works right except the TextField, it just doesn't display but doesn't throw any error. Even the TweenEvent gets dispatched like if it had worked right.I've been debugging it and all the variables are present and with correct values. Is there an issue of TextField or Tween compatibility with Flash Player 9??, NOTE: Currently Working with CS4
ActionScript Code:
var titulos:Array=new Array();
for (var i:Number=0; i<imagenes.imagenes.length; i++)
[code]......
Does anyone know of an XML utility Class that will "auto-format" XML to display within a textField? Just looking for a down-n-dirty solution to display the entire XML tree (via xml.toXMLString()) within a textBox, but would love to find a utility that would format the XML so that it's easier to read within a textField.
Something like:
Code:
<forecast
segment="A"
day_segment="Afternoon"
day_of_week="4"
[Code]....
Is this at all possible? I'm trying to write raw XML (tags, attributes, indents and all) in a text field. The problem is that the text field is using .htmlText, for text coloring, so I cannot simply use the .text property instead. The result is that the XML tags are interpreted as HTML and subsequently only their contents are shown.
View 6 RepliesI want to display some variables(cat1, cat2 and cat3) in a textfield(content_txt).I'm using a external AS-file.
I now have this:
code: //vars instellen
//titels
[code]....
I have two 3 files - 2 files are .as and one is .fla
Animal.as
package {
import flash.text.TextField;
[code]....
I have drawn a textfield (instance name - my_Text) onto the stage. In my actions I have a variable (called 'myFrame') which is an 'int' and the value is a number drawn from an xml feed. Now when I trace the variable 'trace(myFrame)' the correct number displays into the output window. However, when I try to display this variable, using 'myText.text = myFrame', an error occurs. How do I display this integer into a textfield?
View 2 RepliesI'm using loop to create 4 textfields, and push an string array with 4 items. I can trace the correct result in output but show on the stage. [code]...
View 3 RepliesI have a textfield (the one that shows ammo) that doesent display all numbers. U have uploaded the swf. The code that I used to make the textfiled display some text is:
ActionScript Code:
function checkAmmo(e:Event){
var percentAmmo:Number = curAmmoInClipFirst/clipSizeWep1*100;
if (curAmmoInClipFirst >= 0){
trace(curAmmoInClipFirst);
ammoLeftBar.bar.scaleY = percentAmmo/100
} else {
Char.reloadGun();
} ammoLeftBar.ammoLeftNumber.text = curAmmoInClipFirst.toString() + " / " + clipSizeWep1.toString();
}}}
Which is triggered onEnterFrame.
I am trying to display a text field that has text inside it, and display the flashing Caret at the end of the text. I have tried the following:
Code:
// ti_title is my textField
stage.focus = ti_title;
ti_title.setSelection( ti_title.length, ti_title.length );
[code]....
The field is focused because I can type into it, but I do not see a Caret until I have started typing. This is not very good for usability.
I have even tried removing text then re-adding it and then setting the selection again, but still not working.
Is possible to display all the information in the Output folder into a textField on the stage ?
I need to debug after publishing and I can't replace each single "trace" functon.
I am putting together some revision questions for my students in algebra. If an answer to a question has an exponent (e.g. 2x^2) is there a way using a button where students can display the exponent in its correct position when they type it in.
I imagine that it may be possible to create create a button that when pressed inputs the value "2" into the correct position.
Simply as I can put it, I drag a Datefield component on stage and then create a dynamic text field on stage. I'm looking for the actionscript to make the selected date from the DateField also appear in the dynamic textfield.
I've found the script to do this for a numeric stepper
var my_nstep:mx.controls.NumericStepper;
var nstepListener:Object = new Object();
nstepListener.change = function(evt_obj:Object){
myText.text = evt_obj.target.value;
}
my_nstep.addEventListener("change", nstepListener);
I've tried modifying this script to work with the datefield but all I can get to happen is for the dynamic textfield to say "undefined."
I am creating a chat application. I want my smileys to appear on the same line in my sentence (inline). But it doesn'y. It looks all scattered and messed upPlease refer to pic2.jpg in the attachment. Thats is how I would like my smileys to be displayed in my output textfieldBut this is how it appears (refer pic1.jpg in thettachment)pic3.jpg has a screenshot of my dynamic textbox propertiesThe chat messages will be displayed bottom-to-top in the output textbox. This is the order in which I type msgs into my input textfield:Hello {followed by an hand waving smiley}This line will have a smiling face {followed by a smiling face}this line will have sad face {followed by a sad face}
View 4 RepliesHow can I display only two digits after the decimal point in the textfield?
View 5 RepliesIs there anyway I can display exponents or fractions properly in a textfield.
I'm creating educational software and want to see actual symbols as opposed to: 3/4 or x^2
I am trying to make a textfield to display the player's score. I call the textfield "score", and want it to display "Player Score: [score]".
Right now, my code looks like this: score.text = String "Player Score:" (scoreValue);
This isn't working, but I feel that it must be very close. What is the proper method for doing this?
I want to be able to continuously display (refreshing) the x,y positions of the mouse in a textfield.
View 9 RepliesI want my Dynamic textfield to display test from an XML-file. It loads the XML, but for some reason my dynamic textfield shows the nodenames, as well as the node text. Here's a snippet of my code:
Code:
var myXML:XML = new XML();
myXML.ignoreWhite=true;
myXML.onLoad=teamSort;
[Code]....
how to display a variable from within a class in a textfield on the stage? I've been trying for ages and can't figure it out...
View 4 RepliesBasically, there is a Flash movie embedded in the HTML TextFiled. The code is is as follows:
<img src="[URL]" width="470" height="350"></img>
<p><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /></p>
<p>Is there any way to make the space between embedded Flash movie above and this text more narrow ???</p>
In case there is less line breaks (<br />) the text in the last paragraph is shown truncated from the beginnng (so it's like "ny way to make the space..."). Is this a bug in Flash Player or is there any way to render text below embered swf better?
Attachments: problem.gif (42.3 K)
How to add a dynamic text field to display the time elapsed and time remaining to play. I have been checking out the Adobe Live Doc but cannot search for what I need. Below is the code I have already that just shows the video and its controls.
Actionscript Code:
//the below script it on a button on click actionvideoholder.vidPlayer.source = "videos/Introducing our team.flv"//this code is in the same frame as my FLV holder called 'vidPlayer'import fl.video.*;// vidPlayer is the FLV holder//CustomVideoControls is the mc where the play, pause, mute buttons arevidPlayer.playPauseButton = customVideoControls.playpause;vidPlayer.seekBar = customVideoControls.seekvideo;vidPlayer.muteButton = customVideoControls.mutevideo;vidPlayer.fullScreenButton = customVideoControls.fullScreenButton;
I have created the MainMovieClip and Scrollbar as follow ....
my problem is that when I input japanese characters,the characters display at the top corner of the swf until I confirm the input. if I install FlashPlayer "flashplayer10_1_rc2_plugin_041910", then the japanese characters display in the textfield normally....why is that???
with flash player 10.0, I can't input the japanese characters in the textfield.
var mcMain:MovieClip = this.createEmptyMovieClip("mcMain", this.getNextHighestDepth());
scrp.contentPath = "scrollMovieClip";
[Code].....
