ActionScript 3.0 :: Displaying Number In Dynamic Text Box Without Rounding?
Apr 8, 2011
I'm using AS3 and trying to place the number value read from an SO into 2 dynamic text boxes. I'm using a couple of test numbers (2.25 and 1.25). Oddly when I run the following script, I am having difficulty getting my test numbers to appear in the 2 text boxes (T1, T2). (Before the numbers stopped displaying altogether, they were rounding up and seemed to be 10x greater than they actually are, without my doing anything like this.) Note: The script also displays text boxes (T3, T4, T5 and T6) with messages like "above average" based on the scores-not sure if these displays are correct, since I can't view the 2 numbers that the displays are based on.Here's the code. I must be doing something wrong:
Btn1.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler);function mouseDownHandler(event:MouseEvent):void { var so:SharedObject = SharedObject.getLocal("G1", "/"); // using "/" as a local path should work to pick up the
[code]....
View 8 Replies
Similar Posts:
Apr 4, 2005
I need to display the frame number of the Movie Clip into a dynamic text box. What is the actionscript command to do that, if there is one of course.
View 1 Replies
Jun 23, 2008
I know math.round would round a number.
but what if i wanted to round it just up.
so lets say I have 8 thumbnails, my rows are 4 thumbnails long.
so 8/4 = 2 rows.
if I have 1 thumbnail, 1/4 = 0.25 rows. I want this to round up to 1 row.
View 2 Replies
Mar 22, 2012
I'm making a game where you level up, and then the amount of EXP you need to level up, gets higher. The problem is, if I have it so the amount of EXP needed to get to the next level just multiply by 2, it just gets to an absurdly high number, and I don't want that. I would rather have it multiply by 1.3 or 1.5, but the problem with that is that the right side of the decimal gets all ugly to something like "60.54902380".
how would I be able to round it so there's no decimal point, or at best just one number to the right?
View 2 Replies
Sep 12, 2006
How can I round off a decimal number upto say three decimal places? The number comes as an output value like 0.98765e^7 for the statement outputvalue = 0.8678/InputValue. How can I make the output value rounded off as 0.988e^7?
View 7 Replies
Jan 12, 2004
what actionscript do i need to round off a number to 2 decimal points? i have this script which brings me the number but consisting of 8 digits!
digital = _root.val[0].substr(0,_root.val[0].indexOf("<br>"));
digital = Math.abs(digital);
trace(digital);
[Code].....
View 1 Replies
Aug 30, 2005
I'm trying to calculate loan payments using actionscript.
i'd like to have my variable's value like this:
843.34
instead of:
843.3454 (how it's displaying now)
since I'm ultimately going to display $dollar amounts.
I know how to use Math.round() but I'd like to go to two decimal places!
View 1 Replies
Jun 2, 2009
what I need to do is take a value (angle) and round it to the nearest number from a pre-determined set of values (e.g - [0, 45, 90, 180...]. The purpose of this is to restrict the angle to vertical, horizontal or diagonal movement (it's for a word search).
View 3 Replies
Jan 12, 2004
what actionscript do i need to round off a number to 2 decimal points? i have this script which brings me the number but consisting of 8 digits!
digital = _root.val[0].substr(0,_root.val[0].indexOf("<br>"));
digital = Math.abs(digital);
trace(digital);
[Code].....
View 1 Replies
Jan 16, 2012
I have the following NumericStepper:
<s:NumericStepper id="estimertTidCell" value="{isNaN(hostComponent.estimertTid)?0:hostComponent.estimertTid}" stepSize="0.5" maximum="5" change="hostComponent.estimertTid=estimertTidCell.value"/>
When i set the value to e.g. 1.5 through the NumericStepper and store the value, the alert in the following code correctly displays 1.5:
private var _estimertTid:Number;
[Bindable]
public function get estimertTid():Number {
[code]....
Problem: My problem is that once the NumericStepper refreshes, or reloads the variable, it displays 2 instead of 1.5, or 4 instead of 3.5 etc. Anyone got any ideas of what is causing this behavior? I would think that by setting the stepSize=0.5 it would correctly display those decimal numbers.Additional information: When i display the same variable in a spark Label, the value is correctly displayed as a decimal number.
View 1 Replies
Nov 6, 2009
There's a movieclip, lets call it myMovieClip. Inside this movieclip there is a dynamic text box, lets call this one myText. Now to change the text within this text box that is embedded in a movieclip, it's simply:
[Code]....
However, what if there is a variable, called myVariable that stores the instance name of the text box. With only one text box I know it's pointless, but for the sake of example, lets leave it simple. So, suddenly the code looks like:
[Code]....
View 2 Replies
Jan 16, 2011
So, I have some basic actionscript code. It's a legacy site, so I'm using AS2. The line of code simply does this:
myField.text = "some text"
So, I select the text field on the stage, then ensure the font is embedded. All the glyphs I want are checked, but then when I compile and test, the fonts don't show up when the code is executed. Instead, the textfield is blank! What happened?! Where did the text go?
I should mention that the .swf which I compile is loaded into another parent .swf during runtime. If that parent .swf does not contain embedded fonts, is that why it's broken?
View 1 Replies
Mar 2, 2011
I am working in Flash CS5 and I have placed a text field (dynamic, classic text) on the stage. I am accessing it through Actionscript on the same frame like this:
var ct:TextField = TextField(getChildByName("Temperature"));
ct.text = "Hello world";
What ACTUALLY appears is this: So... The H, Ls, and D are gone. Mysteriously. Without warning. I am sitting here utterly confused. Is this just me?
PS. The text field is set to Myriad Pro Bold, a font on my computer, so it isn't like it's a font problem.
View 3 Replies
May 24, 2010
This should be basic enough but I'm having trouble troubleshooting it
var instrument:MovieClip=banjo;
instrument_txt.text="The " + String(instrument)+ " has been selected!";
I wanted this to result in dynamic text field displaying
"The banjo has been selected!" but it results in "The [Object MovieClip] has been selected!".
Is String(var) wrong command to use? The only reason I could think why it's not working is, that the variable has been stated as 'MovieClip' instead of Number or Text. What can be done in the case of MovieClip if this is correct?
P.S I'm wondering if there're rules on asking questions on this board... I've asked two for today already and they would be considered pretty 'basic' ones to professionals / experienced users on this board >_<
View 2 Replies
Jul 19, 2009
I have a dynamic text block (with text in it), which is on a button. This button is within a movie clip. This has created a "slide-in" / "slide-out" illusion when clicked on it.
My problem : The dynamic text does not display at all. If I change the text to Static, it displays.
Am I missing something, or why is this not displaying??
View 9 Replies
Jul 25, 2010
when i run movie i can not see text in my dynamic text box though i am able to select it and if "ctrl + A" it and paste it in my actions panel i can see it contains the text i intend.....
also if i just comment the line from my code -- preloader_txt.text = int(pcent)+" || 1mb"; then the dynamic text box is showing the default text i put there which means there is no formatting problem...
View 4 Replies
Jul 16, 2009
i defined a global array in the first frame.When the user clicks on a button a value is inputted into the array, and they can click on several so all the different values are stored in an array.I want to display the last value of the array, so the last button they clicked on, on a separate frame.so i define my array like:
_global.purchases = new Array();
and the code on my button is:
on (release){
_global.purchases="awhite";
_root.gotoAndPlay("checkout_page");
}
and the code on the frame with the text box is:
var arrayCount = purchases.length;
var latestValue = arrayCount-1;
if (purchases[latestValue]=="awhite"){
imagename_txt = "A White";
}
However, the text doesnt display at all. If I trace my array then I get "awhite". If i trace arrayCount I get "6" and "5" for latestValue. But if i try and trace purchases[0] then I get "undefined".
View 5 Replies
Jul 16, 2009
i defined a global array in the first frame.When the user clicks on a button a value is inputted into the array, and they can click on several so all the different values are stored in an array.I want to display the last value of the array, so the last button they clicked on, on a separate frame.so i define my array like:
_global.purchases = new Array();
and the code on my button is:
on (release){ _global.purchases="awhite"; _root.gotoAndPlay("checkout_page");}
and the code on the frame with the text box is:
var arrayCount = purchases.length;var latestValue = arrayCount-1;
if (purchases[latestValue]=="awhite"){ imagename_txt = "A White";}
However,the text doesnt display at all. If I trace my array then I get "awhite". If i trace arrayCount I get "6" and "5" for latestValue. But if i try and trace purchases[0] then I get "undefined".
View 1 Replies
Aug 23, 2009
I'm trying to figure out how to save input text using dynamic text boxes.I have two input boxes (box1 and box2) where user types first and last name. Two dynamic text boxes (box3 and box4) that will save user's first and last name.I can trace name and last names but not able to display dynamic text and save text from input boxes.[code]
View 3 Replies
Apr 5, 2011
I'm attempting to display external XML data in a dynamic text box. When I test preview my code, the information that I want to display shows up in the Output window, so I know that its linked and works. My trouble is creating the code that will link to my (txtBox) and displaying when previewed.
View 5 Replies
Feb 14, 2012
just working on an exercise and I cant figure out the code to display the trace value in a dynamic text box.Heres the code that generates exactly where I'm at right now.
import flash.display.Bitmap;
import flash.text.TextField;
// basic colour picker (pixel based)
[code].....
View 2 Replies
Jul 16, 2009
i defined a global array in the first frame.When the user clicks on a button a value is inputted into the array, and they can click on several so all the different values are stored in an array.I want to display the last value of the array, so the last button they clicked on, on a separate frame.so i define my array like:
_global.purchases = new Array();
and the code on my button is:
on (release){
_global.purchases="awhite";
_root.gotoAndPlay("checkout_page");
}
and the code on the frame with the text box is:
var arrayCount = purchases.length;
var latestValue = arrayCount-1;
if (purchases[latestValue]=="awhite"){
imagename_txt = "A White";
}
However, the text doesnt display at all. If I trace my array then I get "awhite". If i trace arrayCount I get "6" and "5" for latestValue. But if i try and trace purchases[0] then I get "undefined".
View 4 Replies
Aug 10, 2009
I need to display a few different variables inbetween static text in a dynamic text box. In the movie the users click on pick 1 of 3 characters and 1 of 3 backgrounds. The variables are set onRelease of the button, ie
function pickname(){
if(charSelected == "char1"){
_root.textBox.CharSelectText.text = "Nutmeg";
} else if(charSelected == "char2"){ //else if
[Code]....
To display their name in a tester dynamic text field with just their name in it and no static text
Underneith the images of the characters and bg's is a sentence that gets filled out after you make your choices, ie "One day, [character name] went to the [lbackground name]."
I also need to have the character name and background name different colours from the rest of the text, is there a way to hook up a css file to give just those words different properties from the rest of the text?
View 0 Replies
Oct 20, 2009
I'm working on a pricing calculator and it is all dynamic. I have a local php server that is spitting out variables depending on the level (1,2,3,4)[code]...
View 2 Replies
Jun 17, 2010
I am trying to create a dynamic text field that loads data from an XML file. the XML file cannot contain html formatting, and the idea is that each word should be able to be on its own line. like:
Dynamic
Data
Displays
Here.
Now, I've been told that the way they used to do this is that in the XML is formatted where they put all the words on their own lines. like:
<data name ="input">Dynamic
Data
Displays
Here.</data>
when i try this, it seems to be double spacing everything.
View 1 Replies
Feb 4, 2011
I have a DynamicText movie clip call mcShotsText. In my .as file I'm creating an instance via:
private var _mcShotsText:MovieClip;
_mcShotsText = new mcShotsText();
_mcShotsText.x = 300;
_mcShotsText.y = 300;
addChild(_mcShotsText);
If I make the symbol so that it starts with text, it displays that fine. I want to alter it in code throughout the course of the game. I was hoping this would work:
_mcShotsText.text = "I am a cample";
View 2 Replies
Apr 29, 2011
I have read a few tutorials about adding variables to the text within a dynamic text box. However none of them work for me. I would like the box to display the Score of a game (called Score in my code, var Score:Number = 0). I can calculate the score fine, but it is not displaying in the Box. I need to load my Level Complete screen, with the text box inside. Could i do this by creating it using AS3 every time (by defining its properties in the code), or can i add it to my library (and define its properites there) and then declare an instance of it?
View 2 Replies
Nov 19, 2009
Trying to display an image in a Dynamic Text Field that reads in an html file: using the <img> tag. The text shows up just fine, but the image is not being displayed ??
View 1 Replies
Aug 3, 2006
Im trying to create textfield inside my movieclip dynamically (at runtime). So I created a function called "CreateTextField()" which accepts parameters, including the "instanceName" and "txtValue".
Inside that function is a MovieClip.createTextField() function that takes the values and creates a textfield with the "instanceName" provided and assigns a value to the .text property of the textfield through "txtValue".
The code compiles. But it just doesnt want to show the textfield.
What Ive got in my constructor is:
[Code]...
View 3 Replies
Feb 17, 2010
So I have game that requires the game to count clicks on a button this is what I have so far
Actionscript Code:
var x = 0;function add () { x = x + 1;} up.text = x;
x=how many clicks
I want to add 1 to varible x every time someone clicks on a button
View 3 Replies
