ActionScript 3.0 :: Fail Hittest Collision Using Multiple Arraylist Objects
Jan 4, 2011
I'm actually working on a multiple collision detection in actionscript 3.0, using pixel collision for a game for my assignment, where an enemy patrols around and searching for the hero. So, i draw a line between the enemy and the hero, to check whether there's some collision happened between those two. if the line colllides with an obstacle such as wall, door, etc. enemy will not be able to see the hero. When i tried a single line collision with a wall (one object only) it works perfectly.
But here's the problem. For the multiple objects collision (several walls and doors included), i added those objects in an arraylist, When i used for loop to check the collision between the line and those objects in the arraylist, none seems to react , except the first object in the arraylist or index 0.
Is there any simpler way to do the multiple collision detection?
View 2 Replies
Similar Posts:
Dec 3, 2009
I'm having a problem with a hitTest that I'm not sure how to correct. Long story short, I have a box that is added to the stage and beings to tween down to the bottom. If the user presses the left arrow to catch the object before it leaves the stage, they get 1 point (hooray!).The issue that I'm having is this...multiple instances of the same MC are supposed to be added to the stage by a timer but because of how I've set it up, they all have the same instance name. That leaves me with one of 2 options. I can get the hit test to work, but only 1 instance ever actually shows up or a bunch show up, but the hitTest fails. How can i add multiple instances of the same object, but still be able to determine if one of them is overlapping the box when the user hits the arrow key?[code]
View 3 Replies
Jun 13, 2010
I want to detect collision for several different objects, but want to keep the code as short as possible. whether I can use an array to hold the different movieclips and then detect collision with the entire array, or if I have to create a class and do it that way.
View 1 Replies
Jun 29, 2009
Im trying to make a small game. Could someone take a look at the CS4 and CS3 fla files attached and tell me how to make the game reset when the red circle touches the block boxes.
View 7 Replies
Jul 1, 2009
I have many black boxes fallling down and i want the game to reset when the black boxes touch my red circle. I used this code for my boxes:
ActionScript Code:
this.createEmptyMovieClip("canvas_mc",10);
myInterval = setInterval(addbox1,500);
function addbox1() {
[Code].....
View 9 Replies
Nov 27, 2011
I'm trying to create a sort of tree diagram such that, if you click on one of the circles, its child circles spread outward with some degree of randomness from the original circle, connected by lines. I have this working, but now what I want to do is make sure that none of the circles collide with each other and none of the lines criss cross. You can see the screenshot for what is currently happening. My code is below. How do I change this code so that it checks for collisions and avoids them? I've read up on flash's hitTestObject command, but that only works in the context one object to another. I want to test for one object contacting any display object.
import com.greensock.TweenMax;
var sw = stage.stageWidth;
var sh = stage.stageHeight;
[Code].....
View 2 Replies
Jul 28, 2010
I'll try to make my question pretty short and simple.
[Code]...
So what I'm trying to do is make the character stop when it runs into something. I can do that, but it will only work for one "block" movieclip I put on the stage. What can I do to make this work for multiple "blocks"?
View 2 Replies
Jun 20, 2011
a way, to manage a multiple collision detection with pixel level detection, for objects, not necessarily circles, irregular objects.
View 5 Replies
Jun 7, 2010
I would like to drag and drop multiple objects and on collision activate/play a video clip.
View 3 Replies
Jul 22, 2011
It is possible for a class to extend an arrayList of objects in Flex?
[Code]....
View 1 Replies
Jan 24, 2012
I have a custom java class which has an ArrayList and corresponding to it have a custom vo class which has ArrayCollection (in Flex).I want to return data from Java to flex.Every variable in java is getting mapped to vo perfectly except for ArrayList.When trying to retrive When trying to retrive exposureUSDList (which is an arrayList) in flex I am getting empty ArrayCollection. It is not getting mapped properlyPlease find my code below:
Flex Code:
package com.example.vo
{
[code].....
View 1 Replies
Dec 4, 2009
I've found the BitmapData.hitTest() function very handy, but limited for my purposes. I need to figure out at exactly which point the two images collide (in any coords system,really), since their behaviour will change depending on the angle of the surface hit
View 9 Replies
Apr 18, 2012
I'm trying to create an animated 'LED style' display. I want to draw/tween/type shapes or text and have the 'LED dots' detect the animation and turn on the relevant dots.'ve been testing the hittests but it slows down pretty quickly and the problem with the hitTestObject is that it obviously just detects the bounding box, NOT the vectors.
View 3 Replies
Apr 3, 2004
I'm try to make the Collision Detected with hitTest for long time but it doesn't work. I have two objecct one is the Spaceship and rock. When those two hit each other. I want it to show text "Collision DetectedFrame1 script
var rockCount = 0;
var rockTimeGap = 1;
var nextRockTime = 0;
[code].....
View 3 Replies
Aug 26, 2010
I have two png files, a circle and a maze. Basically the maze is a square with some paths carved through it. I want to draw these images, move the circle to the mouse coordinates, and have a text say 'hit' when the circle intersects a wall of the maze and 'miss' when it doesn't. Now I want to do these using the bitmapdata.hittest method. The circle is a 32x32 image and the maze is a 256*256 image. I've gotten everything set up and everything draws on the screen correctly but I can't get the actual collision detection part of it to work, that is it always displays 'miss' rather than 'hit' even when the circle clearly intersects the maze.[code]
View 1 Replies
Apr 3, 2004
I'm try to make the Collision Detected with hitTest for long time but it doesn't work. I have two objecct one is the Spaceship and rock. When those two hit each other. I want it to show text "Collision Detected" This is my script
Frame1 script
var rockCount = 0;
var rockTimeGap = 1;
var nextRockTime = 0;
var startTime = getTimer();
[code]...
View 3 Replies
Apr 4, 2003
I can't seem to get hitTest to work for the plane in my little game. The code I'm using in the plane MC is:
[AS]if (_root.player.hitTest("_root.badguy"))
playerhealth -= 20;
}
[code]....
I want to the badguy plane to hit the player's plane and take a subtraction from the player's heath. I've fiddled around with using "this" instead of the full path of the playerMC - no success. My hitTest is working fine for the bullets!
View 3 Replies
Mar 10, 2006
For some reason my hitTest in the following function is not working. With each onEnterFrame of the mc being "fired", I am checking to see if it is touching one of the "clouds" I have floating by. My traces tell me that I am targeting everything correctly, but for some reason, hitTest never returns true. Even when I see the mcs colliding. The "clouds" are dynamically attached and pushed into an array (cloudsArr) The clouds and the "fire" mcs are on differnent timelines, but should that matter if I am targeting them correctly?
[Code]...
View 5 Replies
Dec 12, 2002
Does anyone know how to use hitTest with two movieclips so that it would detectthe collision of the visible part of the MC, not the **** bounding box???
View 2 Replies
Oct 13, 2005
Right now I'm working on an advanced hitTesting engine, and What I'm trying to do here is create an engine that will detect collision with one object instead of two. That basically means that if any other objects touch this movie clip, the hitTest will return True. Right now the .fla containing the engine has nothing but a circle that can be moved using arrow keys and 8 squares that disappear when touched by the circle. Obviously, I could do something like:
if (circle.hitTest(square1)) {
do so and so
} else if (circle.hitTest(square2)) {
do this and that
} etc...
But that would be too long, since the engine has to be able to contain 100 squares without too much change in the code.
View 3 Replies
Dec 7, 2010
Right away i just try to explain my problem: Using BlazeDS i got the following Javaclasses:
[Code]...
Then i got a Flex service class calling BlazeDS and executing the getCategories java method. Since Flash dosn't seem to understand typed arrays, the result from that method which i get back in flex is a simple array of untyped objects (the mapping dosn't seem to work here, even tought the class category exists in flex and has the same properties).
thats the first thing. but however, i'm converting the untyped objects manually into objects of the category.as class. the second thing is that categories have child-categories within the java object, which are also ArrayLists of the type category.java. the problem about that: my result event object only contains the first level of categories, looking into them the children are allways null. i dunno why they are empty, since they ARE part of the java object category.
and the third thing (the strangest by fast), you maybe noticed i named the properties of the category.java class strange, like idCat and nameTest instead of simply id and name. why that? because the property names of my flex result objects dont seem to change when i change the java objects properties names (result object properties are named "id" and "name" but the java class object properties are named "idCAT" and "nameTEST"). that it REALLY strange, since if i set the properties, like you see at nameTEST = "TESTNAME" it IS recogniced by flex, only the proertyNAMES dont seem to be recognized at all.
[Code]...
View 4 Replies
Jun 14, 2010
Important: ActionScript 2.0Flash CS3I have some knowledge in Java and C++ which makes this easier... Im trying to make a game and the collision *** does not stop the character in its spot... if i set _y to 0 then it would go to the top of the screen... if i set _y to -1 each frame that the hitTest is active then the character goes through the platform and the rises by -1 (1 up) _y .... how can i make it so the character is stopped immediatly when touching (hitTest) the platform?
[CODE].....
View 6 Replies
Jun 23, 2010
I"m a bit confused because FlexUnith 4's behavior. When I use fail() in try-catch body fail method is just ignored.
[Code]....
I suppose this one should fail as there is no way around it, but it succeeds and turns green. Whatam I doing wrong? When i put fail() before try-catch block it fails as it is suposed to. BTW using Flash builder 4.
View 1 Replies
Sep 1, 2011
how to use the bitmapData collision method. Now I'm trying to figure out if there is a way to see at what angle or coordinate of the bitmapData the collision happens? I need it in order to figure the accurate bounce angle after the collision occurs.
View 2 Replies
Jan 16, 2012
I'm having a little problem with collision detection. I'm currently with very simple game, where the only thing that is off is the collision.I tried with hittestobject and (as I found) it checks for the outer layer (my objects are a circle, and a weird star), so this method was of no use to me. Then I tried with hittestpoint, and I found that it checks for the center of the objects, so game over happens only where the center of an enemy touch the center of my character.I know that I must have something missing and I found a lot of guides but all of them were with squares or with static objects
View 3 Replies
Sep 16, 2009
I have Object "A" that moves around and collides with other objects. There are hundreds of other different objects it can collide with. The only way (I found) to test for collision is to loop through every other object. That seems rather inefficient considering I don't even know how many objects exists. Other objects are constantly created and deleted. So this loop would be rather complicated.Is there a way for object A to receive what other object it collided with so that I can then do some code on that other object. Any way to avoid looping? I later need to find out how to detect what objects are near (within x pixels or so) of object A to decide with which one to interact. Maybe that could also be used now to limit the test of collision? Or maybe it gives someone an idea of what to try?
View 4 Replies
Sep 15, 2010
I'm starting with actionscript 2 and I can't figure out how I set a collision mask for enemies and characters. I've got birds that flap their wings but I only want the player to collide with the body, not with the wings, as they take up too much space and it would be unfair.
I tried mc.setMask and other things I found online, but somehow it didn't work, ie: did nothing. I think I don't get the way this works. I thought you'd need like an invisible rectangle that it checks collisions against instead of the actual animation.
View 11 Replies
Dec 27, 2010
[Code]...
I have a serious problem with Action Script. I'm about to code a new Jump&Run game with a simple gravitation Engine. And this is where I got my problem I can not solve! When moving the player through the levels, I want to move the layers instead of him. So the player stays somehow where he is but the enemies, ground, items ... move around - as in most of these games. The gravitation is intendet to affect every item/enemy (by ENTER_FRAME) and moves every object downwards until it hits the ground.
The problem is, objects of different Layers somehow don't get the right hitTest information. So when having two objects - the first on the same layer as the ground, moving both, everything is fine. But as soon as I put the object into a separate container like "itemsContainer:MovieClip" and I move that, the object doesn't get the right result for hitTestPoints. (Maybe it has something to do with localToGlobal??)
[Code]...
View 1 Replies
May 10, 2011
I am creating a scheduling application that shows projects (wrapped within a canvas) on a 2 week calendar timeline.If the user decides to move a project over by a day, i need to check and see if the moving project would then overlap with any other existing projects. If it does, one of the two projects would need to move down the screen along the y axis until the two projects no longer overlap.I've created a function that loops through a repeater item which is used to create the projects... the end result of this function is an arrayCollection that holds:
0. the id number within the repeater
1. the project title
2. x coordinate
3. y coordinate
4. the width of the project
5. the height of the project
I have also created a function that takes the two objects within the array collection and determines if they're overlapping.I can not, however, figure out a working loop that goes through the array collection, compares each item within it, checks to see if they overlap, moves the project if they do overlap, and then continues onto the next project.
Also, I need to make sure that moving one project will not make it overlap with another.I ended up having to reset each elements y value to 0 each time any project is moved and then re-evaluating whether or not they collide.
View 1 Replies
Dec 29, 2011
I have been trying to fix my collision handling for hours now, but it seems like I am running in circles. To be blunt, my collision handling sucks. It is easy to break, and hardly works on complex objects(like water in my case, see the test at megaswf . com / serve / 1577272)
For collision detection I am using the collision detection kit, or CDK.My level is made up of different large MCs, such as a "wall" MC containing all of the smaller walls, such as water, a tree, or a wall. CDK allows me to hittest the single walls by hittesting the large one, and not each one individually, making it easier for myself.My code has a lot of repetition(8 directional movement), so I will put a "//..." to simplify.
Main.as:
ActionScript Code:
public class Main extends MovieClip[code]......
I have literally been working on this all day, and only feel like I'm making it worse every time I change something. You don't have to spoon-feed me code, the idea should be enough...
View 0 Replies
