I am having a hard time trying to use .SWC files in Flash CS5. I link to the SWC through my library settings, but I keep getting verify error (#1014) on my movieclips: VerifyError: Error #1014: Class my-movieclip-name could not be found.
View 2 RepliesI have a Flash Pro CS5 project that I have built some classes for in Flash Builder using some of the mx classes, like ArrayCollection and HTTPService. I have a Flash Project in my Flash Builder 4.0 pointing to the Flash Pro project. I started out by adding the Library Path to the Flex SDK 4.0.0 in my Flash project paths. Things seemed to work fine at first but now I am getting the following error:
VerifyError: Error #1014: Class mx.collections::ArrayCollection could not be found
If I change all my ArrayCollections to be just Arrays,then the same error just cascades down the list of "missing" mx classes, like HTTPService,etc.I individually added the the framework.swc, the rpc.swc and even the framework_rb.swc and rpc_rb.swc files to the paths but with the same error results.I'm trying to set up a relatively smooth workflow between Flash developers and Flex developers on my team but this is a huge roadblock.I have looked all over and not found a good solution for this problem.
VerifyError: Error #1014: Class air.update::ApplicationUpdaterUI could not be found.
I am on cs5.5 flash pro.
I am creating an updater.
Library path set for:
applicationupdater_ui.swc
[Code].....
I'm trying to load a module into a flex 4 application (the module was compiled using SDK4 as well) but I got this error (I'm migrating this app from Flex 3 to Flex 4):
VerifyError: Error #1014: Class mx.core::LayoutContainer could not be found.
at flash.display::MovieClip/nextFrame()
at mx.core::FlexModuleFactory/deferredNextFrame()
at mx.core::FlexModuleFactory/update()
at mx.core::FlexModuleFactory/moduleCompleteHandler()
[code]....
i embedded external swf file with Embed tag and application/octet-stream [Embed(source="myLogo.swf" , mimeType="application/octet-stream")]
private var myLogoclass:Class; but when i compile it , this error appear VerifyError: Error #1014: Class mx.core::ByteArrayAsset could not be found. i use FLASH IDE (CS5)
We have a quiet big flex application compiled with flex 3.4 SDK.We also have several modules to load after some requirements (some at startup, some later).Everything is compiled with the same version.At some point i got this exception on my machine and don't know how to fix it.
VerifyError: Error #1014: Class mx.modules::ModuleBase could not be found.
at flash.display::MovieClip/nextFrame()
at mx.core::FlexModuleFactory/deferredNextFrame()[code]....
I removed and installed already several flashplayer versions, but always the same error.When we copy the artifacts that are compiled on my machine somewhere and somebody else opens it on his machine it works.
There isn't any tutorials on the web on how to use Stage3D on AIR 3.0. How do I enable it in Flash Builder 4?
I have countless trial and error when testing 2D/3D framework:
VerifyError: Error #1014: Class flash.display::Stage3D could not be found.
I am refactoring a hugh action script solution in Flash builder (beta 2) using the flex 4 sdk.The project does NOT use the mx framework.What i want to have is:
A big 'MAIN' project several small 'MODULE' projects. each 'MODULE' class refrences the 'MAIN' project as an External reference (doesnt compile into swf) - this is done by setting link type = external in the 'MODULE' project properties -> library path.'MAIN' loads a 'MODULE' project on runtime using the 'loader' class.
the problem:I recieve an error from the MODULE project: VerifyError: Error #1014: Class [some class in MAIN] could not be found.
I've got a main swf that loads several extensions as swfs, these swfs share code, and when I've updated the main loading an extension might generate a VerifyError because of missing/changed classes -- I really want to handle that situation gracefully as I don't always have control over the extensions 'out there'.
Apparently one VerifyError (Error #1014) breaks the whole loading system preventing other swfs to be loaded. (They do in fact load - I'm seeing the request and the debug player reports the data as loaded, and the urlloader works as well, but the swf is never initialized and I don't get a COMPLETE event) Does anyone know how I can make flash survive a VerifyError? I'm both interested in ways to know a verifyerror happened and in ways to keep flash going after the error.
We are making a system that has a main swf for the application, and loads separate tools from separate swfs -- there will be versioning issues in the future since the separate swfs are coming from a cms (especially now since we're still developing, but also in the future when other developers might create an incompatible tool). I'm trying hard to prevent them as much as possible but I'd really like to be able to display a message to the user of the system when an incompatible swf is loaded.
This would mean that we need to catch that VerifyError or at least determine the loading failed for some reason - I've got no idea how to handle that at the moment. I suspect it might be possible using 10.1 and the uncaughtError system, but we are currently targeting flash player 10. Does anyone have a good idea? (we are already handling IOErrorEvent.IO_ERROR)
UPDATE: I've built a solution that scans the bytecode before importing, looks like that will work. I'll post the solution later.
When opening a fla - made in cs5 - in flash cs 5.5 a message asks if I agree that the file will be converted to cs5.5. I agreed to the conversion and saved the file.When opening this "converted" fla I get an output error message: #1014: class fl.video::UIManager could not be found.The file is 08End.fla from Classroom in a Book Lesson 8.
View 3 RepliesI am developing application for recording the video in mp4 format with h.264 codec and I am able to record video in mp4 format with h.264 codec, but when I am compiling the Swf by "CTRL+Enter" at that time I am facing error "VerifyError: Error #1014: Class flash.media::H264VideoStreamSettings could not be found" and when I am publishing Swf by "ALT+Shift+F12" then I am not facing any error,what step I need to do for removing the error.
View 3 RepliesI have a pure ActionScript project. I'm using Flex Builder on a Mac, Flex SDK 3.4 and I've even added the playerglobal.swc from the Flash folder to the project's library path. I get autocomplete when I add
import flash.net.NetStreamPlayOptions;
import flash.net.NetStreamPlayTransitions;
But when I run the movie, I get:
VerifyError: Error #1014: Class flash.net::NetStreamPlayOptions could not be found.
I don't get it.. What must I do to use those classes?
Starting with a blank project, when I load a SWF which has a dependence on ISomeInterface defined in a swc which is compiled into my blank project
var lc:LoaderContext = new LoaderContext( true, ApplicationDomain.currentDomain );
var loader:Loader = new Loader();
loader.load( new URLRequest( "Some.swf"), lc );
[code].....
I tested this flash application in Flash IDE, it never through this error. But When I uploaded in server, got this error. Why we getting this VerifyError? It is a flash application loads all the library assets through bulk loader, later it will get assets from bulkloader to display in the main page. Assets includes swf,xml etc.
View 1 RepliesWhen I try to build the project I get
Definition spark.components.gridClasses:CellRegion could not be found.
this class is contained in com/adobe/flex/framework/spark/4.5.0.17855/spark-4.5.0.17855.swc which is included in the library-path by the flex-mojo compiler but I still get the error.
I use flex-mojos 3.9 and Flex 4.5.
I am a complete nuff nuff when it comes to AS3 so bare with me. I had a website skeleton made by a scripter. He made lots of AS files that call to each other with a few movie clips that are populated via the As files. This worked fine for me, I could update the text and image files no dramas and did so and got the website up and running.
A couple of weeks later had to update the files to add a new section adn text and images. Again all went swimmingly. Fast forward to today. Went to update the files and added a new section as per all the other ones. Everything marries up in relation to naming conventions, placement of files within folders et c but suddenly now I'm getting all these errors. 1017: The definition of base class TextItemTemplate was not found.
I've been trying to edit my sister's Flash website, which was developed by someone else, but I'm a newbie with ActionScript so am having a few difficulties. Every time I try to publish a file, I get this error:
1017: The definition of base class UIForm was not found.
I found documentation online for a similar error - regarding UIComponent - so I tried creating a new source path under ActionScript 3.0 as suggested but no luck. I'm having difficulty finding documentation online specifically for UIForm.I tried searching for the location of UIForm under program files but couldn't find it. Can anyone point me in the right direction? I'm on CS4.
(I'm not looking for a solution, (in fact, I could care less. It was just for a quick project and was never actually used anywhere. That error is very likely being caused by a bug in either the compiler or Flash Player). I just thought this was an interesting error which acts quite unexpectedly.)This code throws a runtime error "VerifyError: Error #1030: Stack depth is unbalanced."But this is no standard error! It starts off by listing the bytecode for the function or section that throws the error! (or maybe it's more bytecode than that, I can't tell) Very wonky indeed!
Code:
package
{
[code].....
I'm working on a small piece of code I came across recently, a runtime drawing effect with a motion guide.This is an example:[URL]..The script works perfectly on AS2 but I'm having problems making this work on AS3, I get the error 1046: Type was not found or was not a compile-time constant.
[Code]...
Im having a slight of a problem. I've just created a new application but I'm experiencing the following error: VerifyError: Error #1107: The ABC data is corrupt, attempt to read out of bounds. Now I've searched all over the web for a solution and the only thing I found that might solve it was to upgrade my flashplayer? I like to use the standalone player, simply because it launches faster and its easier to see how things are looking.. Currently it launches flash player 9.0.124.0. I've allready installed the newest SDK and selected it for use, but when I launch my project it keeps sending me to the old flashplayer. How can i change the standalone flashplayer that flexbuilder (3.0.2) launches to either the newer flashplayer 9 or flashplayer 10? And can you tell me this is the correct way to deal with the error I'm experiencing or do I need to take another approach? Am I doing something wrong?
View 5 RepliesI have a Java server that process the bytes of a SWF File stored in the server and ouptut it to the user through a Servlet. The file was decompressed and re-compressed using the java.util.zip package.Everything works fine on Windows Server 2008 server. But now we need migrate the server to Linux. The problem is that when I test the website now, the Flash Player throws this error: VerifyError: Error #1033 Cpool entry 1 is wrong type.Nothing has changed on client side, not even on the SWF.The documentation is too generic/vague about this error, only saying that this means that the SWF is corrupted. But everything runs normal on Windows Server configuration, when changed to Linux, this messages appears... what could possible be the cause?
My Windows Server is:
Windows Server 2008 (6.0 - x86)
Apache 2.2.11
[code]....
I'm dynamically loading a movieclip onto the stage.
[Code]...
In this movieclip I have a dynamic text field named 'game_score_txt' In the class for this movieclip; The_end.as I want to display some text. I figured the following code would work:
[Code]...
But I get the following error: 1046: Type was not found or was not a compile-time constant: TextField.
I have been following the Flash CS3 Portfolio website tutorial on [url].... exactly and haven't run into any problems until this one.I am getting this error?
Error #2044: Unhandled ioError:. text=Error #2035: URL Not Found. URL: file:///C|/Users/jennifer.donnelly/Desktop/DRENNANPROJECTSNEW/porfolio...[code]......
I am a newbie for ActionScript. I would like to add Sound dynamically to my flv. I have this code. I am pretty sure it is working because I found it in Textbook. :(.
package{
import flash.display.Sprite;
import flash.media.Sound;[code].....
When I try to run the code I got these error messages. 1046: Type was not found or was not a compile-time constant: Sound.
1180: Call to a possibly undefined method Sound.
I'm trying to use the Astra library from Yahoo but I'm getting an error saying the base class BaseScrollPane is not found. It appears to be imported from fl.containers.BaseScrollPane, which leads me to believe it should be a part of the base flash 10 library and therefore should be available, but it appears to be missing. Is this part of a separate package from somewhere?
Update: For what it's worth, I found the actual class files in the Configuration/Component Source folder on my hard drive, but adding that to the class path (as well as the Components directory) did no good. I ended up fixing the issue by dragging a scroll pane component to the stage from the Components window and then deleting it, but I'm not sure what exactly that action changed that made it work, and would like to know for future reference.
i have a game im making but it is useing scenes to navigate between pages. every time i click on a button i have created, it gives me this code:
ArgumentError: Error #2108: Scene subnav was not found.
at flash.display::MovieClip/gotoAndPlay()
at buttontesting_Fight_fla::ryusrevenge_17/mv1()
it does this for every scene i have. I even made the buttons in the begining and made them invisible so that they were in the entire time line but not usable or seen till the end of the time line. I dont know what could be going wrong.here is the rest of the code i have for one of my scenes.
import flash.display.*;
import flash.events.*;
import flash.display.FrameLabel;
[code]....
i have a movieclip with a mouse over event, and it works, just this movieclip has a property and the mouseover sometimes is trigged by the textbox, and it doesnt have this property and its giving me a error.i cant encase my function inside of this statment
if(event.target.PosX != undefined){}
this is my error,ReferenceError: Error #1069: Property PosX not found on flash.display.SimpleButton and there is no default value. at Untitled_fla::MainTimeline/GridOver2()
I'm working on a Flex application that processes and displays small amounts of HTML, sometimes including images. I'm getting the HTML out of third-party RSS feeds. Sometimes, I see this in a pop-up window: Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
The RSS URL is just fine, but there's apparently something in the downloaded HTML that's causing a problem. Since the application is meant to run as part of a non-interactive digital sign, anything that requires a click to continue is completely unacceptable. I don't care how useless or malformed a URL is; the app needs to ignore the problem without pestering the user.
Unfortunately, I'm having no luck trapping this event. I'm sprinkling calls like this liberally through the code: [object].addEventListener(IOErrorEvent.IO_ERROR, handleIOError); where [object] is everything from the mx:Text object rendering the HTML to its mx:Canvas parent to the mx:Application top-level app, and handleIOError is a simple function that looks like this:
[CODE]....
I use the code and I get an error
msg: Error #2044: Unhandled
IOErrorEvent:. text=Error #2035: URL
Not Found.
var myLoader:Loader = new Loader();
[code]....
How to fix this?