Lets say I have an array with a bunch of bitmaps that I�m using for bitmap material in away3D.
But I want to take each Bitmap in that array and flip it vertically so that it displays properly when displayed in 3D space. How would I go about this?
I defined a symbol and applied 9-slice guides to it. When I transform the symbol, it transforms fine (the 9-slice works the way I expect) until I flip the symbol horizontally or vertically.
View 1 Repliesis it possible to flip a (duplicated) movieclip horizontally or vertically using AS?
I don't mean rotating it 180 degrees, that's something else, I mean a flip comparable to Modify > Transform > Flip Horizontal.
I need to know how to flip a movieclip vertically / horizontally like in
modify - flip horizontal
modify - flip vertical
But in actionscript, and i've tried ._rotation, and it doesnt work properly, it messes it up
Is it possible to flip a movie clip, horizontally or vertically, using script. I have tried to find tutorials, and I have searched through the ActionScript refernce. Perhaps it requires more than 1 line of code?
View 15 RepliesHow do you get a movie clip to flip vertically/horizontally when a key is pressed. I know how to rotate, but I need to get the clip to flip to make it look more realistic.
View 6 RepliesHow do you get a movie clip to flip vertically/horizontally when a key is pressed. I know how to rotate, but I need to get the clip to flip to make it look more realistic.
View 6 RepliesI am using the senocular transform tool for scaling, rotating etc... skew is disabled in the tool. I Have tried many ways to flip the display object horizontally and vertically. he function I am using is given below. It works fine when the display object is not rotated. When it is rotated and then flipped it outputs a skewed inverted display Object.
function flipHorizontal(dsp:DisplayObject):void
{
var matrix:Matrix = dsp.transform.matrix;
matrix.transformPoint(new Point(dsp.width/2,dsp.height/2));
[code]....
Is there a possible way to make an object flip (change directions, vertically or horizontally) using actionscript?
View 4 RepliesI am using the senocular transform tool for scaling, rotating etc... skew is disabled in the tool. I Have tried many ways to flip the display object horizontally and vertically. he function I am using is given below. It works fine when the display object is not rotated.When it is rotated and then flipped it outputs a skewed inverted display Object.
function flipHorizontal(dspisplayObject):void
{
var matrix:Matrix = dsp.transform.matrix;
[code].....
I need to flip a Bitmap horizontally. I tried setting its scaleX property to -1.0, and that modified the Bitmap in such a way that I can see only a small portion of it (flipped) on the left side, instead of the whole flipped Bitmap. Its x property remained 0. I tried the same thing using a transformation matrix, with the same results.
View 1 RepliesHow do I flip or reverse horizontally a bitmap? I found online that people recommend that you do scaleX = -1 but my bitmap is scaled to 0.7 and therefore when I do *= -1 it doesn't always reverse the image, instead I get a moonwalk effect.
View 6 RepliesDoes anyone know of a light flip class to flip a movieclip that is animated? Away3D is overkill for this project since this simple flip is the only 3D effect needed.
View 0 Repliescreating a flip-book in flash (using AS3) . I've looked at the other flip-book programs and editors out there, and none really give the customization that my company wants.I have something working, but the page scoping seems to be off. The pages will turn back and forward with a button click but they flip out of order. However, it all runs fine with no error when the user clicks on the pages themselves. This is the code from the main timeline (where I'm getting an error).
View 6 RepliesI am making something flash flip like: [URL] but i want to do it in my banner 1000 width and 299 height problem is that i have few banner images i think 5 to 8 and i want to start my flip from "bottom-left" corner till "top-right"
View 1 RepliesI'm cutting my teeth in actionscript 3 on a game that has a character running through a world. So, I have set up my Hit Testing by using the bitmap data hit test method, since I figured my world is going to be destructible - it'd be nice to update the level and then redraw it and have the character interact with the new change. (That works beautifully) I am however; a bit confused as to how I have my hit Testing set up. I've been messing around with it, and it works for now - but I'm not sure why.. currently, I have a character set up by using a class I built and using a series of animations I created. So, this character has a walking and falling animation, etc. This is a movie clip.
Then there's a bitmap 'emptyBitmap' with bitmap data created - however; I never really added this as a child to the character. This is sized to the dimensions of my character. My level is created as a movielip, then it's drawn to a bitmap - when the level movieclip is changed, the bitmap redraws, and that's how this updates.
[Code]....
I know the topic of "duplicating" movieclips is a hot issue with the new virtual machine. Luckily, I understand the implications. I only am [currently] interested in duplicating a Bitmap. See, I load an image from an URL using 'flash.display.Loader.load', which is a non-blocking operation in Flash Player.However,I may use multiple copies of the loaded image (which is reported to be a Bitmap, naturally) in the display list at the same time.Hence, I naturally do not want to load the image from an URL every time, because I don't want to wait for a non-blocking call to complete. Nor do I need to - I mean one copy is already loaded, so it should be possible to just "duplicate" it, right?
My idea is to do use the bitmapData property of a Bitmap and pass it to the constructor of a new Bitmap object. I have not tried the following in action, but I want to hear whether any of you did and if the following would not work, what would:
Code:
var original_bitmap: Bitmap;
var copy_of_original_bitmap: Bitmap = new Bitmap(original_bitmap.bitmapData);
LiveDocs mention that the BitmapData being passed to a Bitmap constructor is "being referenced", which to me might suggest it cannot be used twice? There is also the BitmapData::clone() method, which I am not sure is applicable here or not.I know this is a lot of talk instead of just trying this out, but I test so much Flash Player code daily just to see "what works" (which should be documented instead by Adobe),
If I have a BitmapData that's already been drawn onto a Sprite. Is there a way to redraw the BitmapData onto a Sprites Graphics object without having to invoke beginBitmapFill and passing in the same BitmapData?
View 1 RepliesI'm working on a game, and to keep performance good, instead of addChild'ing 50 new sprites to the stage every second, I decided to have each player draw to their own bitmap, and then to the 'master' bitmap. This introduces an issue though: the second player would override all data the first player has put into to bitmap...My basic debugging proof of concept:
Code:
// bitmap test
import flash.display.Bitmap;
import flash.display.Bitmap;[code]......
I have a bitmap which has several frames (packed along the horizontal axis). In order to render them I copy it to the backbuffer (larger bitmap) as follows:
Actionscript Code:
public override function copyToBackBuffer(db:BitmapData):void{ if (active) var drawRect:Rectangle = new Rectangle((currentFrame-1) * frameWidth, 0, frameWidth,
[code].....
In pure AS3, I have a pixelbender and a large bitmap. The pixelbender is configurable with a distance parameter to affect only a small area of the bitmap. The problem is that the pixelbender is executing over the whole bitmap. What would be the best way to update only the effected region of the bitmap? Given this config:
[Code]...
Is there a way to write a bitmap font right into the bitmap being desplayed? Mabey better worded: myBitmap.draw(image, t) draws a picture is there a way to draw text? I'm stuck even if its just a work around in some way I would like to know... (the current work around i have in my head is writing it in a movieclip turning that into bitmap data and drawing it... esentially creating a prototype answering my question... but a built in way would be easier probably).
View 2 RepliesIn AS3, I am loading a png from a zip file (nochump's zip library through ByteArray to Loader). The png can be up to 45k pixels wide but only 120 tall. This creates a problem in flash, as images can only be ~8000 pixels wide. A possible solution would be to split the images into 6 columns somehow. This would probably need to be done in the ByteArray state, because the limitation is in Bitmap and Loader.
View 2 RepliesI'm using Sandy to animate some objects in 3D. What I currently do to images which are EXPORTED in the library, I want to do to some bitmaps that I create using the DRAW technique. But it wont work :-(
CODE FOR 'CREATED BITMAP' :
ActionScript Code:
var bData:BitmapData = new BitmapData(myObject.width,myObject.height);
bData.draw(mask5);
[Code]....
Sandy doesn't seem to treat the 'created' bitmap the same as those that are exported from the library.
Let´s say I have a bitmap with 3 colors: red, green and blue (not mixed)
What if I wanted to make a bitmap of the red part of the first bitmap?
I´d like to take the red pixels from first bitmap (and its positions), and make another bitmap.
I haven't worked very much with bitmap manipulation and I need to create an app that can find a bitmap (or a pattern of pixels really) in another bitmap.Are there other methods of doing it besides iterating through the pixels and using getPixel()?I'm of course looking for the most effective solution.
View 14 RepliesIf paste the code below into your IDE, you can see that I have a TabNavigator, one of whose tabs' contents are larger than the other tab. I want to get my TabNavigator to resize according to it's selected child, NOT according to the largest of it's children (as it's presently doing). How would I do this?
PHP Code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="[URL]">
<mx:VBox width="100%" height="100%">
<mx:TabNavigator>
<mx:Canvas label="Tab 1" width="100%" height="100%">
[Code] .....
i am trying to make a flash version of my company catalog. i've got the nifty page turning thing working fine. what i am trying to do now is have it so that when you click on a page, it loads a larger version of that page into a blank mc holder. i can get it to load the image no problem. what i CAN'T seem to figure out is how to make the image scroll so that the viewers can see the entire thing.
i need to constrain the size of the holder mc and then have the image inside move with the mouse movement. clicking the image will empty the holder mc and return the viewer to the main catalog.open the catalog and on the first page you will see a temp blue button. clicking that will open the LARGE page view (i know they don't match, this is just a demo ). i need to be able to scroll that large image. still nowhere.
I have tryng to centre my SWF website in html index file but for some reason when i upload it it only uploads to the top right hand side of the browser, center this SWF absolutely in the center, vertically and horizontally my html code im using in html is as follows;
[Code]...
I'm having a trouble centering my flash animation in the center of the page - verically. It centers horizontally but I can't get it to center vertically. How can I do this in either Flash or Dreamweaver?
View 5 Replies