ActionScript 3.0 :: For Loop Assigning Projectionpoint?
Sep 29, 2011
don't fully understand the Projectionpoint trick to flip items with the projection point at their own center in stead of the stage center so I can't seem to figure out how to for loop enough points to each movieClip on stage so it will flip around its own axis in stead of the stage axis.I hope I made myself clear there...
PHP Code:
for(var i = 0; i < obj.numChildren; i++){ if(obj.getChildAt(i) is Flip1Button)
[code]....
View 2 Replies
Similar Posts:
Dec 13, 2009
is there anything changed in actionscript in flashbuilder 4? i'm new to as3.... why is following for loop not assigning value to array ?i tried in various ways, but could not get it
Code:
<fx:Script>
<![CDATA[
[code].....
View 2 Replies
Jun 21, 2004
I am working on a page where three differnt buttons effect one movie clips properties, the one movie clip will go to its rollover state when any of the buttons are on rollover, hmm, that sounds about right] i have assigned functions within a loop and the rollovers, rollouts and instance in the loop have been defined for all but the movieClips dont go to the right place. the code i have used is this....
[Code].....
View 3 Replies
Jun 14, 2007
I'm trying to use a for loop to create 219 movie clips and have it assign the value i to each one. This is how the movie clips are named on the stage
rollover1_mc, rollover2_mc, rollover3_mc and so on.
Heres the for loop I was trying:
Code:
for(i=0; i<220; i++){
rollover + i + _mc.onRollOver = displayContent;
}
doesn't seem to be working.
Basically I need it to repeat so i creates the following lines of code:
rollover1_mc.onRollOver = displayContent;
rollover2_mc.onRollOver = displayContent;
rollover3_mc.onRollOver = displayContent;
etc, etc.
View 2 Replies
Sep 23, 2010
In the for loop below I use the "i" var to work with 5 movieclips. The problem is that I also want to use the same "i" var to assign text to a textfield but I can't figure out how to do it. (tf.text = String("txtInfocon"+i);)
Code:
var numbChildren:uint = this.numChildren + 1;
var txtInfocon5:String;
var txtInfocon4:String;
[Code]....
View 2 Replies
Jun 21, 2004
I am working on a page where three differnt buttons effect one movie clips properties, the one movie clip will go to its rollover state when any of the buttons are on rollover,i have assigned functions within a loop and the rollovers, rollouts and instance in the loop have been defined for all but the movieClips dont go to the right place....the code i have used is this....
Code:
for (var i:Number = 1; i < 4; i++) {
// attaching ALL rollovers to effect the interactive button
this["invis"+i+"_btn"].onRollOver = this["chart"+i+"_btn"].onRollOver = this["inter"+i+"_mc"].onRollOver = function() {
[code].....
all the traces show up correct but not the gotoAndStop on the movieClip (inter+i+_mc_)'s.
View 3 Replies
Mar 17, 2010
I have been trying to assign tween function in an array through a loop in as3.I have 20 mc on stage, the instance names are obj1, obj2 and so on.I want to assign a tween function to each of them, the function looks like this :
Actionscript Code:
function startTween(e:TweenEvent = null):void {xTween = new Tween(obj1, "x", None.easeNone, obj1.x, Math.random()*20, 0.2, true);
[code].....
View 3 Replies
Jul 26, 2010
I am loading a XML of county data for western US states and assigning listeners to movie clips of those counties. The counties have names that are equal to the field named afips in the xml. I am trying to assign listeners to those movie clips as called through a for loop. The counties are children of the parent MC name all_cnt.
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.events.Event;
[Code].....
View 7 Replies
May 18, 2011
I'm loading 8 thumbnails via XML, placing in a sprite, and spacing them out with a helper grid class. This part works. What does not work is when I try to assign a mask to each of these (using a simpleRectangle class I made) I appear to only be assigning a mask to the last image. Am I doing something wrong with 'imageLoader.mask = _mask;' ?
My ultimate endeavor here is to click the thumbnail and animate the mask to reveal the entire thumb.I nested the showPictures function so it could have a reference to the masks, which is not optimal.
package
public class MiniGallery extends Sprite
{
//create($columns:int, $rows:int, $xSpacing:int, $ySpacing:int, $xPadding:int, $yPadding:int)
[code]...
View 1 Replies
Sep 17, 2004
I have is a movie with a button in it called button.i've duplicated the movie (manually) several times on the stage.the movies have been given instance names of movie1, movie2 etc.i've then used actionscript to assign actions to the buttons.i have the following code:
Code:
for (i = 1; i < 6; i++)
{
[code].....
View 2 Replies
Jun 30, 2005
This function all works correctly, except where i am assigning an action to the onRelease event of a given button. Every button is assigned to the same value (appears to be the first value pulled from the array).
function createSubItems() {
vspacer = 6;
i = 0;
[Code]....
View 2 Replies
Sep 16, 2006
is that possible? i'm a complete beginner when it comes to flash and actionscript... so if it sounds like i dont know what i'm talking about... it's because i don't!let me describe my situation...I have about 20 boxes... and on each box i want to assign the onPress to trace the value corresponding to an Array at element "i" in the console...instead of doing:
Code:
box1.onPress = function() {
trace("the value is: "+hypotheticalArray[1]);
[code].....
View 1 Replies
Sep 17, 2004
i'm pulling my hair out over this one. I have is a movie with a button in it called button. i've duplicated the movie (manually) several times on the stage. the movies have been given instance names of movie1, movie2 etc. i've then used actionscript to assign actions to the buttons. i have the following code:
[Code]...
View 2 Replies
Mar 21, 2009
im trying to run a loop and assign all my new movie clipswith different names. i have tried .name and ._name they dont seemto be working..
for (var i = 1; i<=5; i++) {
imageName = new ImageMovie();
this.addChild(imageName);
[code].....
View 1 Replies
Jul 11, 2007
I have great difficulties with something that should be rather simpel to solve, but the problem is that I'm out of solutions to my problem.The buttons that are created from an loop that retrieves it's data from array's doesn't load the external swf, instead it gives my an 'undefined' output.I tried several different array constructions found on other threads, defined them differently, but it won't work.
Here's what I'm working with:
[AS]buttons = [m1, m2, m3, m4, m5, m6, m7, m8];
titles = ["BOEDDHA", "GELUKSHOEKJE", "GEUREN", "INTERIEUR", "VECHTKUNST", "PERSOONLIJK", "SERVIES", "VERMAAK"];
swfArray = ["products.swf", "products1.swf", "products2.swf", "products3.swf", "products4.swf", "products5.swf", "products6.swf", "products7.swf"];
[code]...
As you see, I made an Array of the .swf's, put the swfArray in a loop and tried to define them to the buttons with the onRelease function.
View 2 Replies
Jun 1, 2011
Here is the structure of the XML file: PHP Code: <xmlfile><page></page><page> <source></source> </page></xmlfile> Some "page" nodes contain the extra "source" node. What I'm currently doing is looping through all the page nodes and looking for any source nodes. If there is a source node, I create a variable, and want to assign it a value of the contents of the "source" (HTML).
[Code]....
View 1 Replies
Feb 23, 2009
I'm trying to get better at AS3, and am working on a file that uses XML. I've got some of it to work, but can't wrap my head around this. My XML looks kinda like this:
Code:
<portfolio>
<piece>
[code].....
View 13 Replies
Feb 17, 2010
I have a decompiled swf which I've heavily modified consisting of two large buttons with identical behaviors. When I assign a url to the button layer after double clicking on the left button, then the right, the behavior are both applied to the same sprite which, when viewed in the library, only represents the left button ("url one"), while the second url is missing. There are two separate layers for each button on the scene, yet I can't get separate urls applied to them because of this.I could just create two separate files, but that would add to the amount of code...
View 7 Replies
Dec 13, 2010
I'm currently translating an application from actionscript-3 to Java code and got stuck with a variable assignment problem.
There is such block in as3 application: var num:*=0; num = 5.5;
As far as I understand AS3, variable is declared of an unknown type, which is resolved during the first assignment =0 meaning it will become int. Am I right?
So does that mean that by assigning 5.5 to it, the Number will be converted to int, and I will have num==5 in the result? Or will it become Number after assigning Number to it?
Added:but I don't have any Flash environment to test it myself. I'm converting one of the utility methods from actionscript to Java and got stuck with this problem.
Added 2: The question is, if num will contain 5 or 5.5 at the end of this block?
View 2 Replies
Oct 6, 2009
If I have a combo box with code:
Code:
var listenerObject:Object = new Object();
listenerObject.change = function(evtObj:Object){
years = combo2.selectedItem.data;
[Code]....
and the 2010 is chosen from the list, can I assign the label value to a variable as a string? (I need the data value to stay as is)
View 0 Replies
Feb 9, 2009
i have a main page that loads a swf of an xml photogallery onto the main stage. I used the classpath in actionscript settings to target the actionscript files and xml data. So far, everything works well. Now, a button on the stage unloads this swf and then loads a second photogallery. The problem is that when it appears, it contains the same data (images) as the first photogallery. This is because it is using the same classpath as the first gallery. My question is how can i assign each gallery its own class path. It seems that only one can be selected at a time.
View 3 Replies
Oct 7, 2003
I was wondering if it's possible to assign seperate MC's the same instance name. Say, like, 'boundary' so I can have various boundaries and not have to worry about it.I could use a for loop and name each boundary something like bounds1, bounds2, bounds3 etc. but I'm wondering if there is an even easier way.
View 7 Replies
Feb 9, 2009
i have a main page that loads a swf of an xml photogallery onto the main stage. I used the classpath in actionscript settings to target the actionscript files and xml data. So far, everything works well.Now, a button on the stage unloads this swf and then loads a second photogallery. The problem is that when it appears, it contains the same data (images) as the first photogallery. This is because it is using the same classpath as the first gallery. My question is how can i assign each gallery its own class path. It seems that only one can be selected at a time.
View 1 Replies
May 24, 2010
I've tried googling this simple action but cannot find anything that doesnt relate to something general - only specific issues.
I want to assign an action to a keypress - simple, but i cant do it with any keys other than:
pageup
pagedown
enter
space
[Code]....
id like these functions to assign ed to a standard key
View 3 Replies
Jul 26, 2010
I followed a dynamic gallery scrolling thumbs tutorial and then changed it quite a bit to fit my needs.
I basically added a previous and next button and image title box.
It all works great apart from one thing.
e.g. I click on thumb 5. I then use the next button and go to say... image15. I then click on thumb 9. When I use the prev or next button again it will resume from image15, but it should then carry on from thumb 9 as that was the last change I made.
I thought this would be as simple as assigning the thumb variable value to the image number variable. i.e myID = id; but it doesn't work. my variable myID actually loses its value when I click the thumb image (I used the trace to clarify).
Here is the code.
PHP Code:
function bttnClick(event:MouseEvent):void{
bttn.gotoAndStop(1);
root.logo.visible = false;
myID = id;
[Code].....
View 4 Replies
Oct 22, 2010
I have a 4x4 set of square buttons that I need to give instance names to. They will be named 'btn_1' thru 'btn_16'. Is there any shortcut to assigning the names or do I have to go through 16 times clicking on the button and clicking down to the 'instance name' text box?
View 2 Replies
Aug 9, 2011
I'm trying to get the arrow keys on the keyboard to control timeline navigation. The AS3 code i'm using works the first time, but then goes a bit crazy and stops working for some reason. Please see my attached fla. In the example you're supposed to be able to navigate along the timeline using the arrow keys (going back and forth) I'm sure there's a really easy solution to this problem but I'm new to AS3 and can't figure it out.
View 1 Replies
Feb 3, 2009
I tried the drag and drop demo at [URL]. It works well allowing me to drag an item and have it register when it is dropped on the correct target. I want to modify it so that I can drag an item to multiple locations... not just one. My desired application is the ability to drag pendents or charms onto a bracelet or chain and have them "snap" to the chain. With the above demo, I can see how 90% of it would work, but I cannot figure out how to have multiple targets named the same. The bulk of the code is attached.
The line I believe needs to changed is this one:
if (event.target.dropTarget != null &&
event.target.dropTarget.parent == myTarget){
I need this part :event.target.dropTarget.parent == myTarget
to read something to the affect of:
if item being dropped is over object A OR object B OR object
C OR object D than ... rest of my code
View 7 Replies
Jan 2, 2009
I'm assigning raw matrix values through Matrix3D.rawData.When assigning certain matrices it yields the following error:
ArgumentError: Error #2188: Invalid raw matrix. Matrix must be invertible.
However, I believe the matrix data I'm passing represent an invertible matrix!Is this a (known) bug? Or is the matrix not invertible and is my math failing me?
View 15 Replies
May 29, 2009
I'm trying to call my flashvar and load it in my xml.
but i'm getting an error:
TypeError: Error #2007: Parameter url must be non-null. at flash.net::URLStream/load() at flash.net::URLLoader/load() at test_3d_fla::MainTimeline/frame1()
[Code]....
View 16 Replies
