Professional :: Assigning Web URL To Button?
Feb 17, 2010
I have a decompiled swf which I've heavily modified consisting of two large buttons with identical behaviors. When I assign a url to the button layer after double clicking on the left button, then the right, the behavior are both applied to the same sprite which, when viewed in the library, only represents the left button ("url one"), while the second url is missing. There are two separate layers for each button on the scene, yet I can't get separate urls applied to them because of this.I could just create two separate files, but that would add to the amount of code...
View 7 Replies
Similar Posts:
Jun 30, 2005
This function all works correctly, except where i am assigning an action to the onRelease event of a given button. Every button is assigned to the same value (appears to be the first value pulled from the array).
function createSubItems() {
vspacer = 6;
i = 0;
[Code]....
View 2 Replies
Jul 13, 2006
I have a script; what it does is is read a numeric variable (projects) from "text.txt" and dynamically attaches a relevant number of movie clips in a row. Each one of these movie clips serves as a simple two frame "button"; frame one is the unselected state, and frame two is the selected state...
// load external data
loadData = new LoadVars();
loadData.onLoad = function() {[code]....
anyway, this script works just fine, as is. the variable reads in perfectly, the movie clips attach etc. my problem is this: I want the button that I click to go to its active state. this is no problem as all I have to do is add an onRelease/gotoAndStop() command which is attributed to each button as it is created, as above. my problem is that, say I had a bunch of dynamically generated buttons, when I click one of these buttons I don't know how to tell the other buttons to revert to their inactive states i.e: return to their first frames.
View 2 Replies
Jun 7, 2011
How can I assign the same function to lots of different buttons with different instances names? ie the following function needs to be assigned to all my "correct" buttons. ie, correctansnwer1, correctanswer2, etc etc.
Code: Select allObject(this).mainquestions.CorrectAnswer1.addEventListener(MouseEvent.CLICK,correct);
function correct (event:MouseEvent):void
{
[code]...
View 1 Replies
Jul 11, 2007
I have great difficulties with something that should be rather simpel to solve, but the problem is that I'm out of solutions to my problem.The buttons that are created from an loop that retrieves it's data from array's doesn't load the external swf, instead it gives my an 'undefined' output.I tried several different array constructions found on other threads, defined them differently, but it won't work.
Here's what I'm working with:
[AS]buttons = [m1, m2, m3, m4, m5, m6, m7, m8];
titles = ["BOEDDHA", "GELUKSHOEKJE", "GEUREN", "INTERIEUR", "VECHTKUNST", "PERSOONLIJK", "SERVIES", "VERMAAK"];
swfArray = ["products.swf", "products1.swf", "products2.swf", "products3.swf", "products4.swf", "products5.swf", "products6.swf", "products7.swf"];
[code]...
As you see, I made an Array of the .swf's, put the swfArray in a loop and tried to define them to the buttons with the onRelease function.
View 2 Replies
Jun 25, 2009
I am in the process of writing a scrolling image viewer that dynamically updates from an xml file. I have written the scroll function (with a lot of help from Kirupa and other sources), and the pictures are updating beautifully, but when it comes to adding the function for the buttons I am encountering an unusual error.
Using the following code:
Code:
initButtons=function(){
for (var i in btnArray) {
var btn:MovieClip = btnArray[i];
[code]....
from this site results in the doClick function being called for each of the buttons in the btn array at runtime, and then not working afterwards.
View 4 Replies
Oct 30, 2003
I'm a second day action script student with a specific goal. I would like a button to load a movie clip to a specific place. I have a button with the "LoadMovie" script and it loads the movie onto level 1, but I don't know how to give whatever it loads an instance name so that I can direct it specifically where to load.
View 1 Replies
Oct 30, 2003
I'm a second day action script student with a specific goal. I would like a button to load a movie clip to a specific place. I have a button with the "LoadMovie" script and it loads the movie onto level 1, but I don't know how to give whatever it loads an instance name so that I can direct it specifically where to load.
View 1 Replies
Jun 2, 2011
[Code]...
This code corresponds to a quiz question where the correct answer is either blue or green. I get the #1009 error if I input "blue". The answer "green" seems to work ok. What's wrong with my code? Is there a better way to make is so more than one answer works? Something like "blue" or "green" or "otheranswer", etc..?
View 3 Replies
Jan 29, 2011
i'm designing a website in flash8... now i have created some buttons, and i want that when i click on the button stars will fly from them and there will be a sound... i have already created the animation of the stars seperatly and it's in the library, i have also the sound file.... i just can't remember how to put everything together.... when i'll press on the button the stars will be flying from the button and the sound will play?
View 3 Replies
Apr 13, 2010
I have two buttons that are movie clips in Flash CS4 and when button 1 is on Over stage, I want the button 2 stop movie clip at the certain frame.
View 8 Replies
Oct 13, 2010
I have issues with the buttons working from the SWF file which is brought into the main flash site via UILoader.
[Code]...
I gathered that it is most probably due to the fact that I have constructed a button in the improper way.I tried to redo a button but it was the same result.I would like to try to access it through the main timeline. What would be the whole block of code to put a function on the button located inside an external SWF which is called in via a UILoader?
View 1 Replies
Mar 3, 2012
I created a view cart button in PayPal and need to link it to a button in my fla. I know you can do this in AS but I haven't had any luck in my searches. I'm using CS3.[code]
View 2 Replies
Mar 9, 2010
I have two buttons for paly and stop movie.
It is possible to only use ONE button ...
EXample
When click PLAY , stop btn is on
When click Stop, Play btn is on.
My file: [URL]
View 1 Replies
Dec 13, 2010
I want to make a button (or graphic) active and visible if another button is clicked. But it must be invisible and unclickable before the other button is clicked. (this is a "find the differences between the 2 pictures game" and I want circles to appear over the differences that the user finds but only after he clicks it)
The button (or graphic) I want to become active has instance name of "sockcircle_btn" The button you click to make it appear is called "sock_btn"
In the first frame of the sockcircle_btn layer, this is my code
sockcircle_btn.addEventListener(MouseEvent.CLICK,sockcircledisable);
function sockcircledisable(evt:MouseEvent):void{
sockcircle_btn.mouseEnabled = false;
}
In the sock_btn frame (frame 3) this is my code
sock_btn.addEventListener(MouseEvent.CLICK,sockcircleenable);
function sockcircleenable(evt:MouseEvent):void{
sockcircle_btn.mouseEnabled = true;
}
The file is setup to loop between frames 2-3. But the sockcircle_btn never enables even when sock_btn is clicked.
View 5 Replies
Oct 18, 2010
I'd like to learn how to use Components in Flash, and the documentation and tutorials I find are beyond my comprehension. I usually go to FlashKit and just rehash someone's code... but again, I'd love to learn how to use Flash Components.So I did a tutorial on the toggle button, but it was:1. Click button, and a window pops up at different location on canvas2. Click button again, and the same window dissapears.This is for a videogame, and I'd like a button to be click and that same button be populated with a new graphic. What I mean is, the graphic is a skull, and I'd like to have it start as a dark skull (as if a negative value) and when you click it the skull appears... click it again and it's gone (or that negative or dark skull representing it's off).So this differs from the tutorial I did because the pop-up window is the button itself, and the window that pops up would obstruct me from click it again.
View 3 Replies
Dec 6, 2010
I simply don't know the syntax.I am attempting to make something similar to a Jeopardy board for a Christmas party at work. I have a grid of buttons that correspond to different questions. The function would be as follows: The button "eng_1" (as in "English for 100 points)is clicked.This makes the button "eng_1_q" (as in :English 100 question) visible, so the question can now be read.The button "eng_1_q" is clicked, and that button is then made invisible. The question can not be seen, now we have returned to the board.The original "eng_1" is now a different colour (or left in it's "down" state) to show that the question has already been asked (not sure if this should be part of the function of "eng_1" or "eng_1_q").My idea would be something like this.
eng_1.addEventListener(MouseEvent.MOUSE_DOWN,][code]...........
So once again, I'm just unsure of the syntax.
View 2 Replies
Feb 23, 2009
I'm trying to get better at AS3, and am working on a file that uses XML. I've got some of it to work, but can't wrap my head around this. My XML looks kinda like this:
Code:
<portfolio>
<piece>
[code].....
View 13 Replies
Dec 13, 2010
I'm currently translating an application from actionscript-3 to Java code and got stuck with a variable assignment problem.
There is such block in as3 application: var num:*=0; num = 5.5;
As far as I understand AS3, variable is declared of an unknown type, which is resolved during the first assignment =0 meaning it will become int. Am I right?
So does that mean that by assigning 5.5 to it, the Number will be converted to int, and I will have num==5 in the result? Or will it become Number after assigning Number to it?
Added:but I don't have any Flash environment to test it myself. I'm converting one of the utility methods from actionscript to Java and got stuck with this problem.
Added 2: The question is, if num will contain 5 or 5.5 at the end of this block?
View 2 Replies
Oct 6, 2009
If I have a combo box with code:
Code:
var listenerObject:Object = new Object();
listenerObject.change = function(evtObj:Object){
years = combo2.selectedItem.data;
[Code]....
and the 2010 is chosen from the list, can I assign the label value to a variable as a string? (I need the data value to stay as is)
View 0 Replies
Feb 9, 2009
i have a main page that loads a swf of an xml photogallery onto the main stage. I used the classpath in actionscript settings to target the actionscript files and xml data. So far, everything works well. Now, a button on the stage unloads this swf and then loads a second photogallery. The problem is that when it appears, it contains the same data (images) as the first photogallery. This is because it is using the same classpath as the first gallery. My question is how can i assign each gallery its own class path. It seems that only one can be selected at a time.
View 3 Replies
Oct 7, 2003
I was wondering if it's possible to assign seperate MC's the same instance name. Say, like, 'boundary' so I can have various boundaries and not have to worry about it.I could use a for loop and name each boundary something like bounds1, bounds2, bounds3 etc. but I'm wondering if there is an even easier way.
View 7 Replies
Feb 9, 2009
i have a main page that loads a swf of an xml photogallery onto the main stage. I used the classpath in actionscript settings to target the actionscript files and xml data. So far, everything works well.Now, a button on the stage unloads this swf and then loads a second photogallery. The problem is that when it appears, it contains the same data (images) as the first photogallery. This is because it is using the same classpath as the first gallery. My question is how can i assign each gallery its own class path. It seems that only one can be selected at a time.
View 1 Replies
May 24, 2010
I've tried googling this simple action but cannot find anything that doesnt relate to something general - only specific issues.
I want to assign an action to a keypress - simple, but i cant do it with any keys other than:
pageup
pagedown
enter
space
[Code]....
id like these functions to assign ed to a standard key
View 3 Replies
Jul 26, 2010
I followed a dynamic gallery scrolling thumbs tutorial and then changed it quite a bit to fit my needs.
I basically added a previous and next button and image title box.
It all works great apart from one thing.
e.g. I click on thumb 5. I then use the next button and go to say... image15. I then click on thumb 9. When I use the prev or next button again it will resume from image15, but it should then carry on from thumb 9 as that was the last change I made.
I thought this would be as simple as assigning the thumb variable value to the image number variable. i.e myID = id; but it doesn't work. my variable myID actually loses its value when I click the thumb image (I used the trace to clarify).
Here is the code.
PHP Code:
function bttnClick(event:MouseEvent):void{
bttn.gotoAndStop(1);
root.logo.visible = false;
myID = id;
[Code].....
View 4 Replies
Oct 22, 2010
I have a 4x4 set of square buttons that I need to give instance names to. They will be named 'btn_1' thru 'btn_16'. Is there any shortcut to assigning the names or do I have to go through 16 times clicking on the button and clicking down to the 'instance name' text box?
View 2 Replies
Aug 9, 2011
I'm trying to get the arrow keys on the keyboard to control timeline navigation. The AS3 code i'm using works the first time, but then goes a bit crazy and stops working for some reason. Please see my attached fla. In the example you're supposed to be able to navigate along the timeline using the arrow keys (going back and forth) I'm sure there's a really easy solution to this problem but I'm new to AS3 and can't figure it out.
View 1 Replies
Feb 3, 2009
I tried the drag and drop demo at [URL]. It works well allowing me to drag an item and have it register when it is dropped on the correct target. I want to modify it so that I can drag an item to multiple locations... not just one. My desired application is the ability to drag pendents or charms onto a bracelet or chain and have them "snap" to the chain. With the above demo, I can see how 90% of it would work, but I cannot figure out how to have multiple targets named the same. The bulk of the code is attached.
The line I believe needs to changed is this one:
if (event.target.dropTarget != null &&
event.target.dropTarget.parent == myTarget){
I need this part :event.target.dropTarget.parent == myTarget
to read something to the affect of:
if item being dropped is over object A OR object B OR object
C OR object D than ... rest of my code
View 7 Replies
Jan 2, 2009
I'm assigning raw matrix values through Matrix3D.rawData.When assigning certain matrices it yields the following error:
ArgumentError: Error #2188: Invalid raw matrix. Matrix must be invertible.
However, I believe the matrix data I'm passing represent an invertible matrix!Is this a (known) bug? Or is the matrix not invertible and is my math failing me?
View 15 Replies
May 29, 2009
I'm trying to call my flashvar and load it in my xml.
but i'm getting an error:
TypeError: Error #2007: Parameter url must be non-null. at flash.net::URLStream/load() at flash.net::URLLoader/load() at test_3d_fla::MainTimeline/frame1()
[Code]....
View 16 Replies
