I have a 4x4 set of square buttons that I need to give instance names to. They will be named 'btn_1' thru 'btn_16'. Is there any shortcut to assigning the names or do I have to go through 16 times clicking on the button and clicking down to the 'instance name' text box?
View 2 RepliesIs it possible to add a textField dynamically but have different instance name each time this is created? In other words if I have a button that whenever its click it will add a textField to the stage and assigns a new instance each time this is added.
ActionScript Code:
button.addEventListener(MouseEvent.CLICK, addField);
var inputWidth = 200;
var inputHeight = 20;
function addField(event:MouseEvent):void{
[Code] .....
Something like this but instead of textFieldName this would be different each time.
I'm a second day action script student with a specific goal. I would like a button to load a movie clip to a specific place. I have a button with the "LoadMovie" script and it loads the movie onto level 1, but I don't know how to give whatever it loads an instance name so that I can direct it specifically where to load.
View 1 RepliesI'm a second day action script student with a specific goal. I would like a button to load a movie clip to a specific place. I have a button with the "LoadMovie" script and it loads the movie onto level 1, but I don't know how to give whatever it loads an instance name so that I can direct it specifically where to load.
View 1 RepliesI started a thread about a reference to a symbol House, in the output window, which was: House_1. A lot of people said some useful things about that. All day I've been thinking about it, and I came to the conclusion that I don't understand things, at a very basic level.
Consider:I make a movieclip which I give the Symbol name Drawer. (I don't export it for AcitonScript.)On the stage I manually place two instances of this Symbol. The first one I give the Instance Name drawer (in the properties panel). The second one I leave nameless.Now if I trace the names of both these clips, by
trace(this.getChildAt(0).name);
trace(this.getChildAt(1).name);
the output window gives me
drawer
instance2
Now I know that the so-called "instance name" which I gave in the Properties Panel (drawer) is, in reality, a variable name which Flash gives my first instance behind the scenes. And instance2 is a name that Flash gives my second instance. What exactly the nature of that name is, I do not know.My point is: both names (drawer and instance2) are the .name property of these movieclips. Otherwise I could not have traced them through asking for the .name property, in the above. Yet only the first of these two can be manipulated:
drawer.x can be set;
instance2.x can (as we know) not be set.
But...why? What is the real difference between these two kinds of names? How can they both be the .name property of their underlying movieclip, yet be of such a different nature? What IS the nature of the instance2 name? If it's a String, how come the .name property of one movieclip can be a variable name, while the .name property of another (but identical) movieclip is a String?
I've searched every bit of web page on the net I could find. But it looks as if nobody addresses this issue. We all just work with it - but it makes no bloody sense. A name property = a name property, you'd think. Whether Flash set it or I set it should not make a difference. The x property of a clip, for example, does not change in nature according to who set it - me or Flash.So, again, just to emphasize the problem: how can a property (the name property) of a movieclip change in NATURE depending on who set it? After it's been set, shouldn't the name property of a clip be of exactly the same nature as the name property of another clip?
dynamically assign variable names from XML? For instance, if I have an XML file with a list of variable names and their respective values, can I make my Flash movie create these variables?
View 5 Repliesim trying to run a loop and assign all my new movie clipswith different names. i have tried .name and ._name they dont seemto be working..
for (var i = 1; i<=5; i++) {
imageName = new ImageMovie();
this.addChild(imageName);
[code].....
I have a movieclip that I need to duplicate dynamically based on an outside variable.e.g. clip1, clip2, etc This variable changes so I can't hardcode the number of times it occurs.Is there a way to dynamically create this movieclip multiple times and align it according on the screen?
View 3 RepliesI was wondering if it's possible to assign seperate MC's the same instance name. Say, like, 'boundary' so I can have various boundaries and not have to worry about it.I could use a for loop and name each boundary something like bounds1, bounds2, bounds3 etc. but I'm wondering if there is an even easier way.
View 7 RepliesI cannot find Pan anywhere in the shortcut key explorer thing. I want to add the middle mouse button click to the Pan behavior.
View 7 RepliesI've created a card class that holds the specifics properties each card can have. Now I'm trying to figure out a way to associate the graphic with the card. What I have now is a movieclip with each frame representing a different card. The movieclip is linked to the card class I created.I'm trying to do it with variations of this.gotoAndStop(frame#) in the constructor of my card class, which gives me a card graphic but not having much luck in gettng the frame number to increment to the next frame with the next call for: var cardname:cardclass = new cardclass.The worse part of this is I'm not even sure I'm on the right track here, so my main question is: Is this even a viable way to accomplish this? If not, please give an overview outline of how I should be approaching this.
View 1 Replieshow do i save all my data without assigning them instance name 1 by 1? is it even possible?
btw where do i use the sharedObject? in the documented class or on every classfile?
i just want to clarify things before i make another error.
I'm pretty sure there is a simple solution to this problem and I'm going to feel really dumb for not figuring it out myself but for some reason I am stuck so here goes. I have several movie clip "buttons". I would like, on release, to load a dynamic text file into a container clip on the stage. Pretty simple right? Here is the code I am using:
[Code]...
I have an all flash website I am finishing. On the "index" page of it, there are 7 buttons all pointing to different painting galleries on another page (or another MC in this case).
These 7 buttons happen to be movieclips so that I can have animation on rollover and rollout. A sample of the current AS2 code for them is below:
on (rollOver) {
gotoAndPlay("s1");
}
[Code]....
In this case, on the index page there is a movieclip with successful animation on rollover/rollout. I assign this clip the instance name of "gallery0" and when clicked, goes to a separate page showing the first gallery.
My problem is this, whenever I do assigned the instance name to any of the 7 movieclips, the animation no longer works. It simply sits there in the default state and acts as it should as far as navigation goes.
I have a small issue with instantiation of an xml loader class. I'm using a standard way of loading external data and assigning it to "myXML" variable. My class uses event.COMPLETE for loader to make sure that data is fully loaded. Everything works fine until I make an instance of this variable in to my Main() class. The trace of "myXML" gives me null. It's like it didn't assign data on time. Since the onComplete event handler should take care of any delays it is hard for me to figure this out.
View 4 RepliesI want to get my movieclip "dial_graphcis_mph" to start at X position 0, move to X position -292.35,move back to X position -220, and then yoyo between -230 and -220.Is it possible to do this without using the TweenTimeline class or similar?I want to keep all the code on the stage with the movieclip if possible...The following code only yoyos between 0 and -292.35.
stop();
import fl.transitions.Tween;import fl.transitions.easing.*;import fl.transitions.TweenEvent;
var tweenMPH = new Tween(dial_graphics_mph, "x", Strong.easeInOut, 0, -292.35, 6, true);
[code]....
Basically looking for a way to get the instance created when I use this function I've made, it seems to me "libItem" will be a new instance and I would like to re-assign that back to the item passed into the function so I can access the instance later.
Here is the function I created to create library on the stage...
Code:
function objectPlacer( libItem, instance:Class ):void {
libItem = new instance( );
addChild( libItem );
}
So here is how I call the function
Code:
// Function( var name, library item class name, pos x, pos y )
objectPlacer( i_ranks, txt_Ranking );
My problem is, I try to access "i_ranks" later with the following code...
Code:
i_ranks.x = 100;
And I get the error:
TypeError: Error #1010: A term is undefined and has no properties.
"i_ranks" is defined as a class member.
Also, if you know - what should types should I be assigning the parameters instance and libItem in the function?
I have a grid 8 columns, 3 rows.I used instance names such as 1-1, 1-2, 2-1, 2-2, ect to easily identify each cell. I can call the movieclips within them without a problem by doing this["1-1"].gotoAndPlay(1); but how do I go about calling them when I can't use "this"? "1-1".gotoAndPlay(1); does not work.
View 2 RepliesIn the first frame I have 60 buttons with each having a actionscript in it using the instance name "A1". What I need to know is how can I REPLACE the instance name from A1 to B1 in 60 buttons in my NEXT FREAME?
Is there an easy way to do it rather than typing one by one?? I used the "FIND AND REPLACE" option but it replaces A1 to B1 in both the frames. I need to alter the instance name only in the second frame. How can I do it?
I have two buttons, they're both movie clips, and have identical code except for their names. When I place one of each on the stage and give them instance names, they come up output:
[Code]...
How to write the following AS codes using VAR instead of instance names?
my_Input_Txt.onChanged = function() { _root.my_Dyn_Txt5.text = my_Input_Txt.text;_root.my_Dyn_Txt6.text = my_Input_Txt.text;};
_root.my_Dyn_Txt5._visible = false_root.my_Dyn_Txt6._visible = false_root.MDT1._visible =
[code]....
I get the error "Access of undefined property menu_bar" when menu_bar is an instance name directly on the main timeline. I'm not sure how I would call it in the other class. It also isn't exported for actionscript is that the problem?
I have it imported to my document class as:
var mouseClicks:MouseClicks = new MouseClicks();
addChild(mouseClicks);
Then the class looks like this:
Code:
package{
import flash.display.MovieClip;
import flash.events.*;
[Code]....
I know I've read something about this here before but I can't find it, so for Mr. Thicky here, I have dragged some buttons on my stage - each one is actually an instance of the same movieclip. In the IDE, I have given them instance names like 'myButton1', 'myButton2' etc. I've then grouped all these buttons together into a single container movieclip called 'buttonHolder'. Now, in my code, I am trying to retrieve the instance name of the button I have clicked on:
[Code].....
I have 100+ of the same movieclips on the stage at the same time, all positioned differently.i'm getting really tired of clicking on one of them, then clicking in the instance name box then typing "i65", then clicking on one of them, then clicking in the instance name box then typing "i66"...
is there anyway flash can fill this information in for you? or a plugin anyone's heard of? this isn't really an actionscript question, I'm not so fussed about selecting the different movieclips based on getChildAt or any of that stuff, I'd just really like a faster way of assigning instance names.
I am working on making a photo flip animation between 5-7 photos but i have to duplicate this 70 different times. So what i have done is made a scene for each set of 5-7 photos, they are externally being pulled in through an AS3 script to prevent a large .swf file from happening with all those photos. The problem i am running into so that i cant seem to run a find and replace search to replace the instance name values.
View 1 Repliesiv got these buttons animated using the inbuilt tween function and am coding them like this:
function navOver(e:MouseEvent):void {
var page = MovieClip(e.currentTarget).buttonThumb;
var myTween16:Tween = new Tween(page, "y", Regular.easeOut,
0, -25, 0.35, true);
[code]....
MovieClip(e.currentTarget).instanceName returns undefined neather of which are the instance name.i cant hardcode the function because its used on lots of different mcs throughtout the flash file
I am trying to get the instance name that i gave to a dynamically created movieclip the movieclip was created using var zebra_mc:Zebra = new Zebra(); //creating a new instance of the zebra class The movieclip was then added to the stage using a for loop, as it was contained in an array. Each time a movieclip is added to the stage it is then added to another array (existingObjects) I then need to iterate through this array and pull out each objects names. I have tried using existingObjects[i].name, which returns "instance140" and existingObjects[i].toString, which returns functionFunction(){}, very useful. and existingObjects[i] which just returns the object.
View 2 RepliesI know its possible to hit test From something without an instance name if you have it in a seperate .as file. All you have to do is type in this.hitTest(InstanceName);
But, Is it possible to do a hit test from something without an instance name against something else that doesn't have an instance name?[code]...
I know you can store instance names in an array and call on the array values to reference the instance names in it.I was wondering if there is any way I can take an instance name, feed it directly into a function and use the name of the function variable/array/whatever to affect the object instance of whatever I name.
if it's an array of instance names, what is it actually an array of? Also, is there any way to hold and reference an instance name in a single value? sidenote: this doesnt have much to do with my question, but can arrays be fed directly into the header of a function?
I have a Flash CS4 FLA throwing the following error when I hit Ctrl+Enter to test the movie: WARNING: Multiple 3D objects on the same frame have the same instance name. 3D instance names must be unique. All but one of the instances will be renamed during export. On my layers, I can't see any duplicate instance names, and Flash doesn't give me ANY indication as to which names are causing the problem. I know it's to do with two layers making use of 3D Tween. When I hide them, the problem goes. I've even tried removing and replacing the Symbols. First of all, I have to have the objects on those layers Tween in 3D, and I have to give them instance names as I refer to them from ActionScript code.
View 2 Replies