ActionScript 3.0 :: Getting Error After Thumbs Load
May 21, 2009
I am placing thumbs on the stage in a grid and i have few categories of thumbs, by default first category loads, and then you can choose between other categories.
in this case, removing preloader on line 91 causes an error, but preloader is there, i can trace it just fine (and like i said, it works (no error) when i dont simulate download, or wait for all the thumbs to load before switching to next category, so the code must be right)
I was working with the XML Photo Gallery Thumbnail Tutorial on this site: http:[url]....
And I modified it for my own usage, making it a vertical gallery instead, and had no problems until I came upon the thumbnail images. When I replaced the original thumbs with my new thumbs (that I sized based on width, as it is a vertical gallery) it got all screwed up. The images are of all different shapes. So when it loads up, some of them had huge gaps in between them, and others were even overlapping. So I fixed it by making the heights of all the images the same, resulting in a working thumb gallery, but now half my thumbs are cropped off by the mask. I'm looking for a way to fix it where I still have the same spacing between the images, and that they are all the same width, but can vary in their height. Here's the section of the code I am using:
function thumbNailScroller() { // thumbnail code! this.createEmptyMovieClip("tscroller", 1000);[code]....
I'm also trouble figuring something out from the same tutorial, that I want to change. The tutorial uses these "Next" and "Previous" buttons. On the far right hand side, the half-circle buttons are what I assigned this to, but I don't really want them to have that function. I would rather have them function just like how the mouse functions when it rolls over the thumb gallery, except they scroll the thumbs up and down when clicked.
I have a gallery set up with three primary images. Clicking a primary image brings up it's specific subset of alternate views for the product.
I've managed to get the loading and placement down as I need it, but the images are not loading in the correct order. I've tried several solutions, the current one is that an array of each Sub Image is processed in order. It looks kinda of sloppy but image 1 loads, and when image 1 is complete, image 2 loads. After each image loads, it is put into another array. This array is used to resize and place the files. However when I do so, instead of the placement order being
item[0] item[1] item[2] item[3] item[4]
it keeps ending up like this:
item[4] item[2] item[1] item[3] item[0]
Here is the relevant code. When the following function starts with sArray, the items are confirmed to be in order.
Code: function loadSubs(e:MouseEvent):void//LOAD SUBD { clearGallery();
I'm trying to display a grid of xml images at random times, blinking. I'm trying to use a Timer, but cant get it to work on all images. I've tried putting my loaders in loop and push into array but still only one image is blinking.
I used senoculars xml gallery tutorial (link) to create a gallery but i want to have different galleries so that when i press a button a different set of thumbs load how would i do that ?
looking for a script that loads 6 logo image thumbs into a grid (randomly from folder), with each thumb having a rollover image and link.. Basically the logo area on this page : have about 30 client logos in greyscale ( and colour version for rollover), and need to randomly load 6 logos at a time (or random individually) on a timer. oN RollOver .. loads colour version of logo with link node in XML Something like...
[Code]...
on how to edit my FLA to get it to do this? / source out there you know of? ( My AS skills are not that hot compared with design skills)
I need to have scrub thumbs for video player load and unload repeatedly. Something isn't getting cleared. Every time the thumbs are removed, there's a slight increase in the cpu baseline - something is piling up in memory.
I use UrlLoader.load() in my flash app. And I'm handling UncaughtErrorEvent.UNCAUGHT_ERROR to stop the app when an uncaught exception occured. UrlLoader.load() works when you are connecting the internet normally. But if the connection to the internet was lost after your browser loaded the app, SecurityError happens when UrlLoader.load() is called. I can not catch the SecurityError by using try catch and UNCAUGHT_ERROR happens and it stops my app. I don't want to stop the app when UrlLoader.load() failed because I'm just using UrlLoader.load() to log some unimportant information.
And I think timeout error also can be ocurred if it takes a long time to load. And I also don't want to stop my app due to the time out error. How can I solve those problems? And are there more other type of errors which can be ocurred and stop my app?
I followed a tutorial online to create a photo gallery using an XML file. It works fine when tested in flash via the test movie window and with the bandwidth pro-filer turned on. So, I uploaded the page to my website to test it, and when I load the page in any browser I receive this error message in an adobe flash player pop up box:
Error #2044: Unhandled IOErrorEvent:. text=Error #2036: Load Never Completed.
Here's the Actionscript I am using:
var xmlRequest:URLRequest = new URLRequest("http://www.davidframpton.co.uk/Gallery/galleryData.xml"); var xmlLoader:URLLoader = new URLLoader (xmlRequest); var imgData:XML;
I have two swf files, one is a preloader and te other is the main swf movie.When i preview the movie in flash - 'test movie' all is well but when i plug the swf file in my website it returns the following error:
Error #2044: Unhandled IOErrorEvent:. text=Error #2036: Load Never Completed.
I'm developing an AIR application that logs me into a web service (I click a "Login" button and the application submits an HTML form on my behalf). However, if the application hasn't been executed for a while half a day or so it always dispatches IOErrorEvent with the following error when I try to log in:
Error #2032: Stream Error.If I immediately try to log in again, I'm connected/authenticated without any problem. If I close the application and run it again shortly thereafter, the problem does not occur. It only happens when I run the application for the first time after about 6-12 hours.A lot of Google results blame caching, so I'm doing everything I can to avoid caching but the problem persists. The relevant portion of my code is below. Am I doing anything wrong? Has anyone else seen this very strange behavior?
ActionScript Code: var params:URLVariables = new URLVariables(); params.user = "username";[code]..........
I was working on a project and Error#2044 was driving me crazy, I try to catch all errors, review and over review my movie loaders but nothing, that error does't allow me to use preloader because it fires off from the begining. When I was totally on my knees I decided to start the whole project from scratch, but, just for the sake of it after making a new flash document I try to simulate downloading and the SAME error fire off!, What? there is nothing, not even a line of code, a pure fresh movie and this errors lurks in my movies.What could It be, it is just my Flash?, this has no sense, It is an empty (fresh movie), why does this error fire off?
I am requesting an image via an ASP script: http:[url].....Shows up in browser but doesnt show up in flash when I use the moviecliploader to load it.I had a security error when I tried to load it earlier, but that warning doesnt show up anymore in the output window.
im trying to load an .swf file by using a load bar but i keep getting this error message
1067: Implicit coercion of a value of type int to an unrelated type flash.display:Loader.the location is line 39 the description is 1067: Implicit coercion of a value of type int to an unrelated type flash.display:Loader.
I'm trying to get each of my thumbs to load an individual picture but I can't seem to get it working. I have this script that has a trace for each thumb but I don't know how to actually get the thumb images to load individual pictures.I've tried using:img1.onRelease = function() { as a way of talking to each of my thumb pictures but it doesn't work.
Just want to put the thumbnails in a movie clip.Not any thumbs are appearing, there is a mc on stage, there are images and thumbs, there is a xml_fileďż˝
Code: var gallery_xml = new XML(); gallery_xml.ignoreWhite = true; gallery_xml.onLoad = function(ok) {[code]...
I am attempting to run the XML Photo Gallery with Thumbnails from the tutorial, but contained within an empty movie clip of another swf. I've been trying to rebuild my website in Flash and I was attempting to utilize this external gallery to keep the file size down. The Test Movie of the thumbnail_initial.swf works perfectly on its own, but the thumbnails no longer scroll when I test the website.swf that I have loaded thumbnail_initial into. I created an empty movie clip (analog_mc) and placed it where I want the gallery to load. On the page containing analog_mc (timeline path is Scene1 / siteContent / analogFrame), I have tried both of the following code in the actions layer:
analog_mc.loadMovie("thumbnail_initial.swf"); and loadMovie("thumbnail_initial.swf", analog_mc);
I get the same result with either: the gallery loads correctly where I've placed the analog_mc empty movie clip, the first three thumbs appear across the bottom, the Previous and Next buttons function, but the thumbnails do not scroll. I am using Flash CS3 on Vista, my AS skills are elementary as well as my XML.
how to make a custom hslider in Flex 4 (spark) with two thumbs? Since Flex 4 the thumbcount property of the slider component isn't longer available (at the mx component it was easily to set). I have to style the track and the thumbs.
I have a master movie clip with a movie clip embedded. This is to create a photo gallery. With in the master movie clip I have "buttons" or thumb nails of pictures to be displayed from the embedded movie clip (which are the pictures). I can't seem to get the thumbs to call on the frames where I want the movie motion tween to start to show a picture (the tween is to give the effect of fading in). Below is the code that I have (note that for the same buttons I have added some effect when the mouse rolls over and out of the thumb so disregard that part of the code)..
n somebody point me to a tutorial in AS2 for making an autoscrolling bar which contains thumbs. It should scroll very fluidly on mouseposition. I have no idea how to create this.
I want to load YouTube video thumbnails in my as3 project, i have tried to load via :[URL], but it works in local good, however when i upload it to my website it doesnt load thumbs. is there an api that i can use to load thumbnails? i am using TubeLoc to load videos, but i didnt find a function to load thumbs in this api.
I'm using the code below to create a simple gallery of thumbs in a line with space between each thumbnail.[code]I have a rollover/out function that scales up/down the thumb outwards from the centre of the thumb.I was expecting the scaling thumbnail to "push" the other thumbnails left and right as it scaled...but it only shifts the thumbs to the right of it and the thumbs to the left do not move.I need code to allow a scaling thumbnail to push aside the other thumbs in every direction.
I'm using the code below to create a simple gallery of thumbs in a line with space between each thumbnail.
ActionScript Code: onEnterFrame = function () { for (projIdx = 0; projIdx < projectsArray.length; projIdx++) { //space between photoThumbs
[Code].....
I have a rollover/out function that scales up/down the thumb outwards from the centre of the thumb.
I was expecting the scaling thumbnail to "push" the other thumbnails left and right as it scaled...but it only shifts the thumbs to the right of it and the thumbs to the left do not move.
Imagine a 3 thumbnails in a horizontal line, I want the middle thumbnail (thumbnail 2) to scale from the centre and push thumbnail 1 to the left and thumbnail 3 to the right. But obviously I want this to work for x amount of thumbs.
