ActionScript 3.0 :: Nested If Else - Get A Functioning Invisible Next Button That Takes You To The Next Image?
Jun 22, 2010
I'm working on an image viewer that contains 14 projects, each being their own external swf.I am determined to get a functioning invisible next button that takes you to the next image in the current project or to the next project if you are on the last frame in that project.The current code works well enough starting at any project and clicking until you get to the next. When the next project comes up it stops working.
next_btn.addEventListener(MouseEvent.CLICK, loadnext);
function loadnext(evt:MouseEvent):void {
if(firstswf != null) {[code]...
It doesn't seem to throw out any errors...
View 14 Replies
Similar Posts:
Jan 7, 2010
I have a 2 movieClips on stage. One is a holder to load the images into, the other has buttons nested inside. The button will not load the image.
Here's the code:
btn1.onRelease = function() {
holder.loadMovie("one.jpg");
}
I'm sure that it's due to _root or similar but I'm not too sure how to apply it properly if so. I've attached the .fla
View 3 Replies
May 15, 2009
I'm creating my first website. I've managed to create a homepage. On the homepage is a enter site button, which once it is pressed starts thetimeline... I have an actions/labels layer which I am writing my code in. On frame number 'one' is my code below.
stop ();
enter_site_btn.addEventListener (MouseEvent.CLICK, buttonClicked)
function buttonClicked (event:MouseEvent): void
[code].....
View 5 Replies
May 27, 2009
The reset button on this file doesn't work. In fact I was puzzled about why it had disappeared and it is there but the wrong size (see large navy blue shape in the lower right hand corner of the stage?) When you click this shape you get this error:
ArgumentError: Error #1063: Argument count mismatch on AddATree2/onReset(). Expected 0, got 1.Not sure what that means because I can't find any arguments in this function.This should work so that the text and polygons disappear when the reset button is clicked so you can do this again.Here is the code and the fla is attached. (There are three files inline: Reset.as Tree.as and AddATree.as. See attached .fla AddATreePrototype.fla)
AddATree.as
---------------
Code: Select all/* AS3
Copyright 2008 __MyCompanyName__.
[code]....
View 11 Replies
Sep 16, 2008
I have been trying to get a for loop to produce buttons based on a value.
My current code is:
var xPosition:Number = 50;
var yPosition:Number = 15;
//problem one is that "rows" is a variable from the html page
[Code].....
View 7 Replies
Feb 22, 2012
Am working in a wordpress project. It uses many fash images. When right clicking on the flash image, the first option takes the user to another website. How can i remove it?
View 1 Replies
Sep 9, 2010
First off, I am new Second off, I hate action script it's a pain in the ass. Here's what im dealing with: Im making an info point computer program in flash cs3. After making several pages I am forced to make a navigation button to jump to the first frame(home).
At the home page you will be sent to several different pages (these links work just perfect. To create a home button i've made an button with the same code
Code:
home_now.addEventListener(MouseEvent.CLICK,homeClick);
function homeClick(event:MouseEvent):void{
gotoAndStop(1);
}
Unfortunate this does not work, while the links at the home page do work.
I've tried several things to fix it, but it won't do:
- Send to tagged frame "home" instead of frame "1".
- Change the instance name
- Putt the actionscript in the exact same frame.
Weirdly enough the home button does work on the keyframe where it is placed, even though I pushed the frame over all the other pages it wont jump to home.
Explanation (edited prt scrn):
img190.imageshack.us/img190/1212/84313940.jpg
View 1 Replies
Jul 9, 2010
I have been searching for a way to create a button that when pressed, opens the "save as" dialogue box and saves a screenshot of the stage of an .swf.
I am using this for a game in which movie clips can be moved around the stage. When the button is pressed, it would take a screenshot of the stage with the movie clips in the position they were moved to and then save this screenshot.
The screenshot would just be a picture (such as .PNG, .jpeg, etc.), not the actual .swf file.
Is this button possible to create with just Actionscript in Flash?
View 1 Replies
Oct 28, 2003
First off, i just want to say that I'm pretty much a newbie when it comes to Flash MX ActionScript.Okay, here here's my situation... have included a menu that will take the user to any of the 10 scenes. Moreover, in each of these 10 scenes, I added a BACK, NEXT, and HOME button for navigation purposes.My problem is this... was at 'Scene 1' and I wanted to jump to 'Scene 7', so I go to my menu and clickedon the button that would take me to 'Scene 7'. Okay...now that I'm at 'Scene 7' I want to go back to 'Scene 1'. BUT THIS TIME I WANT TO USE MY NAVIGATION BUTTONS. So I press the BACK button from 'Scene 7' and it takes me to 'Scene 6'. (I already know why it took me to 'Scene 6' instead of 'Scene 1'.) BUT, I WANTED IT TO GO BACK TO THE LAST SCENE VISITED!
View 5 Replies
Oct 28, 2003
I just created a Flash MX document with 10 scenes.
I have included a menu that will take the user to any of the 10 scenes. Moreover, in each of these 10 scenes, I added a BACK, NEXT, and HOME button for navigation purposes.
My problem is this....
I was at 'Scene 1' and I wanted to jump to 'Scene 7', so I go to my menu and clicked on the button that would take me to 'Scene 7'.
Okay...now that I'm at 'Scene 7' I want to go back to 'Scene 1'. BUT THIS TIME I WANT TO USE MY NAVIGATION BUTTONS.
So I press the BACK button from 'Scene 7' and it takes me to 'Scene 6'. (I already know why it took me to 'Scene 6' instead of 'Scene 1'.) BUT, I WANTED IT TO GO BACK TO THE LAST SCENE VISITED!
So my question is this...
How do you get FLASH MX to remember which Scene you last visited?
Is there a script that I must add to force it to remember the last scene visited?
View 5 Replies
Mar 3, 2012
I created a view cart button in PayPal and need to link it to a button in my fla. I know you can do this in AS but I haven't had any luck in my searches. I'm using CS3.[code]
View 2 Replies
May 22, 2011
[Code]...
I am also having issues with the logo loading a second time when I click a separate button that takes me back to frame 1 with the code that creates the empty movie clip.
View 2 Replies
Oct 12, 2008
I am a Flash novice who has worked through a couple of the standard introductory books on Flash in Actionscript 3 and some of the online tutorials. However I cannot work out how to do the following: A button A (I know how to design buttons including invisible ones) is on the stage. A user clicks on this button which then causes a text to appear at another location of the stage. This text includes an invisible button B. The text tells the user to click on it with the result that the text, including the invisible button B, disappears but if the user reclicks button A then the text with button B should appear again.
View 3 Replies
Oct 7, 2009
I have written some actionscript:
ActionScript Code:
stop();
/* QUESTION */
question1_txt.text = "Question 1. 'question goes here'.";[code]....
but the functions dont work in the way they should.instead of only working when a button is pressed, it automatically takes effect.
View 3 Replies
Jul 29, 2009
I am making a video player based on the Video Basics tutorials Lee put up a while back.
I am working on a custom controlBar with autohide. Basically, when i mouse over the video area I want them to pop up, and when I mouse out of the video area I want them to disappear. I have setup the controlBar movieclip itself with "show" and "hide" frame labels. Each one plays a fade in/out sequence a few frames long, no big deal. That is the easy part and works fine.
In order to detect the onRollOver and onRollOut events for the video area I made an invisible button on top of it called "butt". It works fine too.
Code: Select allbutt.onRollOut = function() {
trace("out of video");
controlBar.gotoAndPlay("hide");
};
[Code].....
Invisible button layer above controlBar layer: When i roll onto the video area the controlBar pops up, but I cannot access the buttons on it (play, rewind, etc) because they are now underneath the invisible button that monitors the rollOver and rollOut of the video area, which apparently wont let anything under it be clicked. How can I gain access to these buttons?
Controlbar layer above Invisible Button layer: When I roll onto the video area the controlBar pops up fine, but once I mouse over the control bar flash thinks I am leaving the bounds of the invisible button and tries to hide the controlBar right away, which causes me to "re-enter" the invisible button, so it just bounces back and forth between showing and hiding the controls.
How can I monitor the video area and still have access to the buttons on the controlBar once it pops up?
View 3 Replies
Jul 27, 2009
i am working in cs3 flash, but saving my files to flash 8. i am having an issue with getting an invisible button to work. i never had this problem in flash 8. could you please look at the very simple file attached below and let me know WHY i am getting error messages saying: "warning: this movie uses features not supported in flash 5 player" ?? and "scene=scene 1, layer= invisibleBton, frame=405:Flash mx button instance name"
View 3 Replies
Feb 18, 2009
I am having a problem linking an invisible button to a url. I have 3 invisible buttons that have an action script as follows:
button1.addEventListener(MouseEvent.CLICK,clickHan dler1);
button2.addEventListener(MouseEvent.CLICK,clickHan dler2);
button3.addEventListener(MouseEvent.CLICK,clickHan dler3);
function clickHandler1(event:MouseEvent):void{
navigateToURL(new URLRequest("mywebsite"));
[Code] .....
After I upload the files, I can see the hand icon when I mouse over them, but when I click on that spot nothing happens. I have two text links on the same page that do work. One is an email link and the other is a url link. I have check the button names to my code and they do match.
View 4 Replies
Mar 5, 2010
I am using Flash Professional CS4. I made 2 buttons (2 rectangles,each turned into a symbol of type button). I now want when I click 1 button that the second becomes invisible. Is there a way to do so?
View 2 Replies
Jun 7, 2009
I have one button instance that stretches across many frames, and I would like to make it invisible in some of the frames and visible in others. How do I do this with ActionScript 3?
View 1 Replies
Nov 2, 2009
I have two motion-tween animated movie clips used as "buttons" which I would like to link to various html pages on my site. Using invisible buttons works, but I can no longer see the animation. If I put it under the movie clip layer, it no longer responds. Is normal, or should I place the invisible button within the editable movie clip?
View 4 Replies
May 6, 2010
I'm sure this is something easy that I'm missing, but I can't figure it out. How do I make a button invisible? I need it to be invisible through frame 43 of my movie. I have tried changing the alpha to 0, but it's not letting me change that, except in the edit button mode which changes it for the entire duration and not just through frame 43.
View 1 Replies
Sep 26, 2011
I have invisible buttons on a movie clip that is loading swfs onto a parent movie clip. I hope I am current in the terminology. Are a parent and root the same? Is saying root absolute and parent relative? I'm digressing.So, this this._parent.gotoAndPlay("contact form"); is going to the keyframe named "contact form" and it will stop there. What I want to happen, is, I want the other invisible button named aboutmeMC2 to go back to the keyframe named "skip" so my contact form will no longer show up and it will load the external swf
ActionScript Code:
on (release) {
this._parent.gotoAndPlay("contact form");
[code].....
View 1 Replies
Sep 10, 2009
I have a home page, with 5 swf's that are called into a container on the main. Now when I click on the home button on i need for the embedded swf thats up to become invisible not unload because i need the information to .
View 9 Replies
May 15, 2010
Im a bit a of a noob when it comes to AS. I have a problem that I think should be very easy to solve.
I have a shape that I turned into a button and gave it an instance name of "CA" I also have an array that has a string item called "CA"
I want to be able to make the button invisible by using the array instead of just writing the instance name. I have the following code but it just doesnt work.
[Code]...
View 5 Replies
Feb 24, 2011
I'm using AS2.
I have invisible buttons on a movie clip that is loading swfs onto a parent movie clip. I hope I am current in the terminology. Are a parent and root the same? Is saying root absolute and parent relative? I'm digressing.
So, this this._parent.gotoAndPlay("contact form"); is going to the keyframe named "contact form" and it will stop there. What I want to happen, is, I want the other invisible button named aboutmeMC2 to go back to the keyframe named "skip" so my contact form will no longer show up and it will load the external swf.
ActionScript Code:
on (release) {
this._parent.gotoAndPlay("contact form");
aboutmeMC2._root.gotoAndPlay("skip");
View 0 Replies
Oct 31, 2008
I've built an image scroller but I'd like to make the 'next' and 'previous' buttons invisible at the first and last frames frames respectively. The code I'm using for the scroll is below. I think the code I'm after should be something like this:
HTML Code:
if (targetX<720) {
btn_Previous.visible = false;
}
But I can't work out where I should put it (or even if it's correct) within the scroller code.
[Code]....
View 11 Replies
May 13, 2009
I tried adding a invis button on the banner ( by the way the banner is moving) but for some reason it wont let me add Action script to it to link to a url
View 3 Replies
Aug 27, 2004
Is it possible to create a invisible mc with in 2 other invisible mc's and if so would there be any complications. Im trying to do something similar and it gets to the second layer but then doesnt want to load the third inv-mc. Like loading an external swf to a container mc then in that same mc have another external load and then another.
View 3 Replies
Apr 7, 2010
i am using one input text box and one button. In the beginning the button should be invisible. Once i started to type text in input text box, the button should be visible.I used following script. But it's not working.[code]
View 2 Replies
Feb 23, 2011
I have invisible buttons on a movie clip that is loading swfs onto a parent movie clip. I hope I am current in the terminology. Are a parent and root the same? Is saying root absolute and parent relative? I'm digressing. So, this this._parent.gotoAndPlay("contact form"); is going to the keyframe named "contact form" and it will stop there. What I want to happen, is, I want the other invisible button named aboutmeMC2 to go back to the keyframe named "skip" so my contact form will no longer show up and it will load the external swf.
[Code]...
View 5 Replies
