I have written some actionscript:
ActionScript Code:
stop();
/* QUESTION */
question1_txt.text = "Question 1. 'question goes here'.";[code]....
but the functions dont work in the way they should.instead of only working when a button is pressed, it automatically takes effect.
How can I delete this onRelease handler?
Basically, I want it to check if a link is assigned (image[p][1]), and if it is, create an onRelease handler for that image. (This is a rotating image slideshow).
Thus far, this code will check to see if the link is assigned and will create the onRelease handler when an image loads that has a link assigned via XML.
The only problem is, it does not remove the onRelease handler when the image rotates to the next image.[code]...
I'm writing a program that has a button, and when pressed, and the shift key is pressed, will do an action. I have an onRelease function for that button also, but for some reason when I have the button pressed, and I press shift or any other key, it automatically thinks the button is being released. I was using the onMouseDown, onMouseUp functions before, but they caused me a lot of problems aswell.
Try it for yourself:
Code:
btn.onPress = function() {
trace("pressed"); //now hit a keyboard button
}
[Code]....
I'm working on a site where I'm using an onRelease event handler. Within the onrelease I have a couple different actions that need to happen. For example, when I click on a button I want an image to move up, then move to the right and then call gotoAndPlay (frame) I can do all of these actions, but they all happen at once. Basically I just want the animation to happen first and then have it goto frame 20 when the animation is complete...
View 3 RepliesI have a function on root:
_root.fadeBox_mc.onEnterFrame = function (){
if (fade){
this.nextFrame();[code]....
This causes a mc to fade in and out on rollover/rollout. But what I wanna make is a box that fades in when pressed on the button and fade out when pressed for the second time. But if I say
on (press){
_root.fade = true;
}
the mc fades in, but I cant do another on (press) to fade out. Is this too confusing?
My name is rajesh n i hav a small problem.
i m duplicating a singla movie clip (as button) but when i defining URL for all ten button it's not taking.
For each button i wanna different html url.
for ur reference i m giving url to download the file.[URL]..
I have been searching for a way to create a button that when pressed, opens the "save as" dialogue box and saves a screenshot of the stage of an .swf.
I am using this for a game in which movie clips can be moved around the stage. When the button is pressed, it would take a screenshot of the stage with the movie clips in the position they were moved to and then save this screenshot.
The screenshot would just be a picture (such as .PNG, .jpeg, etc.), not the actual .swf file.
Is this button possible to create with just Actionscript in Flash?
First off, i just want to say that I'm pretty much a newbie when it comes to Flash MX ActionScript.Okay, here here's my situation... have included a menu that will take the user to any of the 10 scenes. Moreover, in each of these 10 scenes, I added a BACK, NEXT, and HOME button for navigation purposes.My problem is this... was at 'Scene 1' and I wanted to jump to 'Scene 7', so I go to my menu and clickedon the button that would take me to 'Scene 7'. Okay...now that I'm at 'Scene 7' I want to go back to 'Scene 1'. BUT THIS TIME I WANT TO USE MY NAVIGATION BUTTONS. So I press the BACK button from 'Scene 7' and it takes me to 'Scene 6'. (I already know why it took me to 'Scene 6' instead of 'Scene 1'.) BUT, I WANTED IT TO GO BACK TO THE LAST SCENE VISITED!
View 5 RepliesI just created a Flash MX document with 10 scenes.
I have included a menu that will take the user to any of the 10 scenes. Moreover, in each of these 10 scenes, I added a BACK, NEXT, and HOME button for navigation purposes.
My problem is this....
I was at 'Scene 1' and I wanted to jump to 'Scene 7', so I go to my menu and clicked on the button that would take me to 'Scene 7'.
Okay...now that I'm at 'Scene 7' I want to go back to 'Scene 1'. BUT THIS TIME I WANT TO USE MY NAVIGATION BUTTONS.
So I press the BACK button from 'Scene 7' and it takes me to 'Scene 6'. (I already know why it took me to 'Scene 6' instead of 'Scene 1'.) BUT, I WANTED IT TO GO BACK TO THE LAST SCENE VISITED!
So my question is this...
How do you get FLASH MX to remember which Scene you last visited?
Is there a script that I must add to force it to remember the last scene visited?
[Code]...
I am also having issues with the logo loading a second time when I click a separate button that takes me back to frame 1 with the code that creates the empty movie clip.
I'm working on an image viewer that contains 14 projects, each being their own external swf.I am determined to get a functioning invisible next button that takes you to the next image in the current project or to the next project if you are on the last frame in that project.The current code works well enough starting at any project and clicking until you get to the next. When the next project comes up it stops working.
next_btn.addEventListener(MouseEvent.CLICK, loadnext);
function loadnext(evt:MouseEvent):void {
if(firstswf != null) {[code]...
It doesn't seem to throw out any errors...
[Code]...
i use the above code for the glow effect, i want the effect to load automatically rather than when i hover my mouse over it. how to edit the code to do it?
I'm having different elements on stage which can be dragged using startDrag.The elements themselves are buttons. OnPress will startDrag, onRelease will stopDrag.
All works fine except when I release the mouse button while my dragging element is underneath another element (lower depth), which is a button also.Result is that my dragging element keeps being stuck at my mousepointer..I was thinking of temporarily disabling all other buttons on stage while dragging but is there something I overlooked maybe?
I'm trying to create a set of 4 vertically arranged buttons that 'split' apart when those buttons are pressed. For example, if you click the topmost (1st) button, the bottom three buttons will drop down so submenus (for the 1st button) can now be revealed beneath. Again, when you click the 2nd button from the top, the bottom two buttons drop down, revealing submenus, and so on.
Now, is there a way that I can use actionscripting to tween the buttons to not only motion tween a drop down when a button is first pressed, but also to motion tween the button to return up to its original spot when another button is then pressed? Right now, I have two keyframes, side-by-side which each containing a different y-scale value for an object. Can I do some actionscripting to get the object to motion tween upward to its original spot instead of "clicking," or snapping back to is original spot when another button is pressed?
I want the press button to detect the last button pressed and if the shapes match, make them do something...obviously. I think I'm going at it the wrong way. I need to stick a "triange" id into the button/mc then if compares that and then if there is a match works then... right?
[Code]...
What button event should I use to make the program understands to DO SOMETHING only when the button is pressed/dragged. In my sample code below, I want something to happens only if the button is dragged beyond 200 in y axis. I tried onRelease, onRollOver and onDragOver but still not working
[Code]....
I have a series of buttons inside an array. I am trying to get the buttons so that once they are pressed, they remain in the over state. Which is a darker color than the up state. So that people know which button they have pressed. Is there an easy way to do this for buttons?
View 1 RepliesI'm creating my first website. I've managed to create a homepage. On the homepage is a enter site button, which once it is pressed starts thetimeline... I have an actions/labels layer which I am writing my code in. On frame number 'one' is my code below.
stop ();
enter_site_btn.addEventListener (MouseEvent.CLICK, buttonClicked)
function buttonClicked (event:MouseEvent): void
[code].....
I have a function that executes when a button is pressed:
btnRandomAll.addEventListener(MouseEvent.CLICK, clickHandlerBtnRandomAll);
function clickHandlerBtnRandomAll(e:Event)
{
...but, I need it to also execute once, upon the file loading.
how I can disable clicking through an object so it doesn't effect anything under-neath the object when pressed.
View 9 RepliesIs there a way to ADD onRelease method on movieclip that already has a onRelease method? Without replacing the first one.
ActionScript Code:
mc.onRelease = function(){
trace('1');
}
I was thinking this, but it doesn't work
[Code]...
I'm a beginner. I used on(release) script for a button two times but 2th on(release) work only.[code]...
View 4 RepliesI have a loop to create clip buttons w/jpg images on face && load same jpgs into main viewer clip. Problem is, the mc buttons won't respond to onRelease.
for(i=1;i<3;++i)
{
var mc = "mc"+i; // button mc clip names
[code]......
the attached menu has functions for onRollover, and onRollout, however I was wondering if it was possible to create a function for onRelease that would mean that once the menu item was selected, the onRollout would not set the menu back to original color and would leave it highlighted so users could see that this was the page were on via the menu.It is saved in CS3 as I work with CS4 and it does not seem to let me save it back for 8 or earlier versions.
View 1 RepliesI created a button with some roll over effects added some load movie action to load external movie.swf file, everything works perfect except I need about 12 same buttons but with different loadMovie command I mean to load different swf files. so what I did to make it fast I copied the first button and pasted it 12 times so I made 12 nice buttons, but the problem I have is that when I change button 2 load movie settings it automatically changes every button, so I am a little frustrated,
View 9 RepliesI've been following the tutorial "Creating Smooth Button Animation in Flash": urL...As with most menus, when the button is selected it needs to stay highlighted so the user knows which section they are in. The tutorial left this bit out.I've been unsuccessful so far. Can anyone help finish it?[code]
View 8 RepliesI'm amended a AS2 movie, which is a rotating banner add movie. In this movie there is a button which is always visible throughout the movie. I need to add a onRelease behaviour onto this button, so that it can call a JavaScript function when clicked.
I'm new to Flash, I have done some Flex work, but no Flash. How can I add the onRelease behaviour to the button and have it available through out the movie. I know how to convert the button to a movie clip and add the onRelease behaviour but it only lasts one frame, how do I make available through out?
using this as my actionscript for preloader:
[Code]....
Scene 1, Layer 'Actions', Frame 3, Line 2 1119: Access of possibly undefined property onRelease through a reference with static type fl.controls:Button. id like to get my website working. what im i doin wrong? id like to use the latest actionscript.
I have a gallery located here:When you first land, there is a splash photo, and then once you click a button, it goes away. When a button is pressed, there is a down state image that gets swapped in.What I want to know is: how do I script it so that if the user clicks a button in a down state, the button will return to it's up state AND the splash image will reappear?The button up/down/over state script that I am using is posted below.
Code:
button.onRollOver = function() {
this.over_holder._alpha = 100;
[code]...
I'd like to keep all my button code on the made timeline as a discipline I'd like to start. I have a button instance named aboutBtn in a movie clip. That movie clip is nested in another movie clip. That final movie clip is on the main timeline and given an instance name of menu.
Would my syntax for onRelease then be:
_root.menu.aboutBtn.onRelease = function() {
Or would it be:
_root.aboutBtn.onRelease = function() {
Or:
_root.menu.aboutBtn.onRelease....
What would the syntax to give that button an action be?