I've been following the tutorial "Creating Smooth Button Animation in Flash": urL...As with most menus, when the button is selected it needs to stay highlighted so the user knows which section they are in. The tutorial left this bit out.I've been unsuccessful so far. Can anyone help finish it?[code]
View 8 RepliesI have a movieclip that I want to be resized when a button is clicked. I want the animation to be smooth as if it had weight though. I read the tutorial on this but I need something slightly different, I would rather it where I can just refer to a function that is set in another movieclip. That way I could easily refer to it again and just set the height, width, and if possible, x, and y.
And my second question, is how to keep the border of my movieclip that is going to be resized the same thickness. I want the inside to be resized but the sides to stay the same width but move to stay on the edge.
I have a movieclip that shows an animation onRollOver and an animation on RollOut but onRelease the animation enlarge itselfs but now when I'll roll out when the animation isn't open (so i didn't release) the animation plays the animation for the minimizing of the animation. Here's my code (I know its a bit amateuristic but I'm not a programmer )
[Code]....
All I want to happen is some text (6 words) animate in from the right hand side and slow to a stop in the centre of the banner. Simple.
The problem im having is the when the text animates on it tends to stutter and appear jerky whereas I need it to be very smooth.
Ive tried animating the text using basic frame tweening with easing and with various high frame rates.Ive tried various coding methods using tweening classes (both the inherit class within flash and imported 3rd party classes) which seem to improve the animation slightly but still with some random jerkiness.[code]...
I wanted to do a simplae programmed animation of moving a movieclip on its Y axis across the screen, all I do is decrease its y value by 2. But its not working properly, I just get to see the starting and end point, can't see the movieclip travelling across the stage smoothly as I get to see if I create a simple Classic Tween.
View 1 RepliesI have a menu in which when you click on a button, a rectangle moves up or down to sit behind the button clicked on (to highlight it). I was wondering how I can make the rectangle move smoothly as in the tutorial where the ball follows the mouse. Here is the code I have used:- Actions layer- Frame 1: currenty = -50; yto = -50; Frame 2: if (currenty == yto) { } else if (currentyyto) { setProperty(bar, _y, bar._y-10); currenty = bar._y; } Frame 3: gotoAndPlay(2); And for each button- on (release) { yto = -50; _root.contents.loadMovie("demopage.swf"); } With 'yto' specifying the location to move to.. This all works fine, I just cannot work out how to get that smooth springy movment as the the 'Mouse Follow with Easing' tutorial.
View 2 RepliesI am trying to animate some jpgs that have been loaded inside a movie clip. i just want them to move horizontally. I have tried using tweens and also the onEnterFrame method with different frame rates but the animation is always juddery and not smooth.
View 6 RepliesDoes anyone know how to smooth an animation like this one?URL...Or it has to be done with Papervision or AE to make it run right?
View 1 Repliesi have an fla that has a number of labelled frames that are relevant to buttons on the page. when a button is clicked the movie timeline goes to the specific frame and plays an animation - but how can i make it play the animation in reverse before going to the new frame.
so if the user clicks on, "about" (for example) the timeline moves to the "about" frame and plays an animation and then pauses and if the user then clicks on "contact" the about animation will reverse itself and then go to the contact frame and play the 'about' animation.
i have done something similar in the past by putting this script on the button
Code:
on (release) {
_root.movieToLoad = "url of swf";
play();
[Code].....
and in this case the mc of the animation would be "text1" or "text2" etc...
I am new in actionscripting,[code]...
Now once i click 1st button i want the box to move its position with an ease tween animation to [code]...
I want to know how it's made the effect of smooth transition when the window is resized. I could make MCs get position through AS, scripting:
Actionscript Code:
mc._x;mc._y;mc._width;mc._height;
But I want to know how can I make it moving smoothly when the window is resized.
Example: [URL]
I can make an animation so the image fades in.http:[url].... the fade is not smooth. I did this by changing the alpha layer 20% every 5 frames. How can I make the fade smooth?
View 1 Repliescheck this link this ppl just make smooth images animation [url] the images in the back ground "flash" work smooth and nice I try to make the same don't work the image look so stupid what is the way they use to make the image look smooth in motion ?
View 2 Repliesim quite new to flash, and im just about to create an animation which will rotate continuously but my problem is that each time it ends its loop it pauses for a bit then loops again,
View 6 RepliesI am trying to make simple continuous animation on y axis.
The problem is that the animation is not smooth!!! It has jumps and hiccups. It is hard to see in the beginning, but once you see it, you can't get rid of it.
Here is an example:
[URL]
This particular code is pretty simple:
import flash.events.Event;
addEventListener(Event.ENTER_FRAME, moveRoad);
var deltaY:Number = 0;
function moveRoad(event:Event):void
[Code].....
I really want to smooth the animation a little bit more.i want the animation to look smooth, no jumping or stopping, want continuous
View 1 RepliesI am new to Flash/Actionscript and am having problems getting some movieclips to link to different URLs on release. I am able to get them to animate, and I am able to get them to link to an html page in the same folder, but I can't get both functionalities to work at the same time. I've tried putting the actionscript in the instance object, in the action layer, and other things and nothing seems to work!?
Here is the link to the source file: [URL] believe that the actionscripting needs to be done in the "banners" movieclip, but it could also be the "Symbol 3" movieclip. Here is also a link to the .swf [URL]. See, if you mouse over the first two clips, they animate, but they do not go to the HTML page if you click on them [URL]. The third clip will go to the page success1.html in the same folder if you click on it, but it does not animate on mouse over.
I have some code for my movie clip which is as follows:
purplebow.onRelease=function(){
purplebow.onEnterFrame=function(){
this.nextFrame();
if(this._currentframe==this._totalframes){
delete this.onEnterFrame; }}}
purplebow.onRollOut=function(){
purplebow.onEnterFrame=function(){
this.prevFrame();
if(this._currentframe==1){
delete this.onEnterFrame; }}}
When you click on the movieClip "purplebow" the animation starts, and when you roll off it goes back to normal. What I would like implementing some code into this so that my other movieClips (which are: bluebow, redbow, greenbow, etc). Disappear onRelease and then return onRollOut. The code and the movieClips are all on the same timeline, each on different layers.
I have dynamic text that needs to animate slowly across the screen but right now it jerks in 1 pixel increments as compared to the vector graphics accompanying it.
I've increased the frame rate, converted it to a bitmap, applied GridFitType, etc., none of which (or my implementation) seemed to work.
Is there a way to achieve smooth animation with dynamic text at slow animation speeds?
I have the idea of scripting animations, placing them inside a function, so then I can recall them whenever I want:
Code:
function eyesleft(){
eyes._x=0
eyes._x=-100
}
one question is I need some kind of delay timer to make the animation smooth, otherwise the animations would be all jumpy. Set interval seems a bit jumpy.
I want to make an animation which interacts to the overstates of different buttons, but I want the animation to tween between the different states without reseting to a defaut when the mouse cursors off of the button. Another way of saying it is that I want the animation's instances to smoothly transition from one button to the next, no matter what order the buttons are cursored over.
View 5 RepliesI have a component I created that works like a Viewstack but the next index component slides in from one of the four sides. I've got it working well enough that it's acceptable to use, but I want to make it more efficient.
Right now I'm using a Canvas as the base component, I create a snapshot of the current view using an ImageSnapshot (new Bitmap( ImageSnapshot.captureBitmapData( this ) )), and I slide the new index on top of that image on index change.
I'm basically looking for suggestions on how to do this a better way. By taking the Image after the component loads, and after the slide happens, I've gotten the initial jaded moves down to a minimum, but we normally use this for transitioning grids so it's almost always slow on the first or first couple slides.
[Code]...
Im animating an around in 3d space with papervision and Id like to make the curves of the animation nice and smooth, if I put random values into the xyz and bezier values the turns are quite weird and erratic. Does anyone know of a way I can animate something around in smooth curves, but not have to create specific values for the tween?
View 2 RepliesI'm having different elements on stage which can be dragged using startDrag.The elements themselves are buttons. OnPress will startDrag, onRelease will stopDrag.
All works fine except when I release the mouse button while my dragging element is underneath another element (lower depth), which is a button also.Result is that my dragging element keeps being stuck at my mousepointer..I was thinking of temporarily disabling all other buttons on stage while dragging but is there something I overlooked maybe?
Is there a way to ADD onRelease method on movieclip that already has a onRelease method? Without replacing the first one.
ActionScript Code:
mc.onRelease = function(){
trace('1');
}
I was thinking this, but it doesn't work
[Code]...
I'm a beginner. I used on(release) script for a button two times but 2th on(release) work only.[code]...
View 4 RepliesI have a loop to create clip buttons w/jpg images on face && load same jpgs into main viewer clip. Problem is, the mc buttons won't respond to onRelease.
for(i=1;i<3;++i)
{
var mc = "mc"+i; // button mc clip names
[code]......
the attached menu has functions for onRollover, and onRollout, however I was wondering if it was possible to create a function for onRelease that would mean that once the menu item was selected, the onRollout would not set the menu back to original color and would leave it highlighted so users could see that this was the page were on via the menu.It is saved in CS3 as I work with CS4 and it does not seem to let me save it back for 8 or earlier versions.
View 1 RepliesI'm amended a AS2 movie, which is a rotating banner add movie. In this movie there is a button which is always visible throughout the movie. I need to add a onRelease behaviour onto this button, so that it can call a JavaScript function when clicked.
I'm new to Flash, I have done some Flex work, but no Flash. How can I add the onRelease behaviour to the button and have it available through out the movie. I know how to convert the button to a movie clip and add the onRelease behaviour but it only lasts one frame, how do I make available through out?
using this as my actionscript for preloader:
[Code]....
Scene 1, Layer 'Actions', Frame 3, Line 2 1119: Access of possibly undefined property onRelease through a reference with static type fl.controls:Button. id like to get my website working. what im i doin wrong? id like to use the latest actionscript.