Is it common for AS3 apps to not work in IE? Is there a way to make them work? I have a movie clip in my library linked to a custom class Main and I have nothing on stage. Just one frame. Everything is built inside that movie clip. I add that movie clip to stage through a document class and everything works perfectly in Firefox and Chrome but when I open it in IE, it's just a blank page.
View 6 RepliesI decided to try to use setInterval for myanimation, which is just a mouse trail.However, I'm trying to get teh mouse trail to be a dynamic mask.In my previous swf this was achieved by using a holder mc with the animation inside and then using this as the mask. But this time I just canpt seem to hit on the right way to get it to work. The code I am using for the mouse trail is:
Code:
var i:Number = 0;
var myInt:Number;
var t:MovieClip;[code].....
in the function, but now the trail doesn't resize and the mask still doesn't work.
I have a button object that I need to scale to align with the variable width of an array of images.However, when I set the width in code, the button does not actually become that width. Tracing out the width gives me the correct value, but on screen.. it's off.
I've proved it to myself by scaling the same button object manually in the properties pane and visually comparing. Both of the buttons below have a width of 410.
Code:
navigatorDown_btn.width = 410;
navigatorDown_btn.x = (stage.stageWidth/2)-(navigatorDown_btn.width/2);
trace(navigatorDown_btn.width); // output: 410
I have a swf that is pretty complicated, you can interact with the page and go to different keyframes and it stops and/or starts depending on buttons, but I want to put it in a fla or something so I can put other swfs next to it and build it up and put several of them together as one.
I don't care about making it too complicated, I just want one interactive swf to go to the next compiled swf when that movie ends, but when I try importing it or loading it it just runs straight through without stopping or paying any attention to the scripting.
I am trying to more between frames using the data returned from a node n_EventID in an xml, when the node returns "1408" I want to move to frame 1 but if it returns anything else I want to move to frame 2. The part where the code moves to frame 2 seems to work perfectly but I can't seem to move to frame 1 when "1408" is returned.
xmlResultFinish = new XML();
xmlResultFinish.ignoreWhite = true
xmlResultFinish.onLoad = loadXmlResultFinish;
[code]....
I'm having a problem, where random IE's are not able to display my .swf file. All the IE's are IE8 with the latest flash pluggins and all security's are set at Medium, however some IE's get just a grey box and other's get the full flash file. What's going on? It works fine in Safari and Firefox of course, but why so much difficulty with AS3 Flash9 in IE? here is a link to the site, and it's the big image changer at the bottom of the front page.
[URL]
But my proublem is that I have a flash presentation.The defalt for moving the slide screens back and forth are left and right arrows.It works fine when tested or even the .swf fileBut then the left and right buttons don't respond when I go to fullscreen.
View 5 Repliesi followed the instructions oh how to make a centered pop up window here :i'm using a mac..nd it works in Safari... but when i try to use explore to open it, the pop up window doesn't come up...why is that.......? did i do something wrong?here is my website:and please click on 'message' to see for yourself.
View 5 Repliesi followed the instructions oh how to make a centered pop up window here : [URL]
i'm using a mac... and it works in Safari... but when i try to use explore to open it, the pop up window doesn't come up..
here is my website: [URL] and please click on 'message' to see for yourself.
this is what i have on the maintimeline:[code]I have 4 moveiclips called: redhex, bluehex, greenhex, and yellowhex.what the above code should do is make a 15x15 grid of hexes (yes i wanted all 4 hex mc's overlapping each other at each space on the grid.).Before i added the lines to dupllicate the blue, green, and yellow hexes also... the redhex movieclip duplicated exactly as it should.But after adding the lines to duplicate the blue, green, and yellow hexes also, in the same locations... Nothing at all showed up when i tested the movie (not even the redhex's)
View 4 RepliesIn the actions of a movie clip,I want to use something like:
PHP Code:
if(Key.isDown(W)){
//do stuff
}
But,it does not take anything else than LEFT,RIGHT and some others.I even tried ASCII:
PHP Code:
if(Key.isDown(100))
{}
It doesn't work.Then how do we use keys like W,A,S,D?
I've made a rounded rectangle with a gradient fill and another rounded rectangle over it with a transparency to create kind of a glossy effect. Both objects are part of a symbol in the library of the FLA file. Then, I activated the checkbox to create a scale-9 grid, and the Export for Actionscript checkbox in order to add this symbol from AS3. Next I made sure that every rounded corner was completely included in the slices on the edges of the grid. Well, no matter what, the object is scaled as a normal graph: the rounded corners appear bigger and deformed.
View 4 Repliesthis is what i have on the maintimeline:
Code:
initialize();
function initialize() {
for (i=1, r=0; r<15; r++, i++) {
for (c=0; c<8; c++) {
[code]...
I have 4 moveiclips called: redhex, bluehex, greenhex, and yellowhex.what the above code should do is make a 15x15 grid of hexes (yes i wanted all 4 hex mc's overlapping each other at each space on the grid.).Before i added the lines to dupllicate the blue, green, and yellow hexes also... the redhex movieclip duplicated exactly as it should.But after adding the lines to duplicate the blue, green, and yellow hexes also, in the same locations... Nothing at all showed up when i tested the movie (not even the redhex's)
I'm in a big distress, I'm using AS2 with CS3 (Flash 9.0 on OSX Snow Leopard) and I can't get the querystring. I don't understand it has always worked before with my previous version of Flash. I'm using this AS code: t_txt.text += _root.age; I have a dynamic text linked to t_txt. For the HTML I simply published using Flash, then I changed in the html file like this:
<param name="movie" value="age.swf?age=56" />
And
<embed src="age.swf?age=56" quality="high" etc >
When I set to use AS1 it just works fine. But I can't use AS1 all my projects are with AS2. So what's wrong?
flash cs5 wont follow s3's redirects, instead it makes an ioerror with http status code 303 which is not an error code, its a redirect code. It doesn't hit the redirect page at all. If i was to save this file as a cs4 doc and run it in cs5, same issue. If if was to open and run it in cs4, it works fine, no error, redirect gets hit.Exactly the same file works in cs4 but not in cs5.
View 1 Replieson my website I have a contact form where you should be able to type into an input text box. For some reason, my website won't allow me to click and edit the input text box. Could the problem be that it is within a movieclip?
View 21 RepliesI've only been working with flash for about 3 weeks and I'm fairly new to programming soI'm using Flash CS5 with AS3 btw.
Code:
///////////////////////////
// Custom Mouse Controls
[code]....
So here's my code:
mcbutton.onPress = function() [code]....When I click on button it goes to _down frame but it shifts back to 1st frame. It doesn't really stop there. How can I make it work?
I've followed the documentation (I think) but it doesn't seem to work. I have a root document which loads a bunch of swfs created off a 'template' that uses two fonts. Rather than embed the fonts on each swf I though I'd embed them in the calling document and share them. The documentation explains to export them for sharing and give give them an identifier string and a URL. AS3 however doesn't permit the identifier string so I assume this is supposed to work with the class name.
As for the URL I'm giving it the name of the compiled root document (home.swf). I then copied the fonts from the calling document's library to the library of one of the called documents. I then told the pasted font symbol properties to import for runtime sharing and added home.swf to the URL field. The swfs are all in the same directory but when I compile the home.fla and call the swf there is no text visible. No errors show up.
My map: [URL] The problem: The buttons does'nt work,i think i'm doing something wrong. They're in the map it self,because i don't want them to move while zooming. Actions of the button is: on (release) {getURL("http://mapping.lt", "_blank");} T.y. The fla of the map is here [URL]
View 1 RepliesI've used this code to apply a gradient alpha mask: bg_mc.cacheAsBitmap=true;mask_mc.cacheAsBitmap=true;bg_mc.setMask(mask_mc); Then I applied a motion tween to the mask_mc clip. But the motion tween doesn't happen? It only shows the first frame of the motion tween. It does apply the alpha mask though. Why doesn't it show the rest of the motion tween.
View 9 RepliesI'm trying to export an animated text image, but for some reason, when I publish in .gif format, the text is all screwed up. I have example of it, in the attached file. It worked for me in flash mx, but in flash cs4 it doesn't work. I want the text to be readable and animated, in this .gif.
View 4 RepliesI put the h264 packets into flv file with the flv file format in video_file_format_spec_v10.pdf. I used CodecID=7(AVC) and filled video data with h264 encoded packet. But it doesn't work. The codec lib is x264 with CABAC enctropy. The test.flv file in attachment is what I created using x264. Below is the media infomation about test.flv.
View 2 RepliesThis works: (ta is a textarea)
var il:XMLList = xml.channel.item; var spectacle1:String = il.title.text()[0];var spectacle2:String = il.title.text()[1];ta.text = (spectacle1+spectacle2);
// outpout content1content2
This not!
var il:XMLList = xml.channel.item;var spectacle1:String = il.title.text()[0];var spectacle2:String = il.title.text()[1];ta.text = (spectacle1+newline+spectacle2);
For this website I've put a preloader on the 1st frame and the site on the 2nd.I've tested the site after having created a small animation which makes appear the main menu, a logo and an image.Everything did work good, so I went on building the site.Now that I have created some pages I've tested again the whole site and the preloader doesn't work anymore.Testing the site on the "ctrl+enter" window and simulating the download I have a white background (both the preloader and website background are yellow) then I see the preloader for a fraction of second and suddenly the site appears.
Publishing the site on my web space the background is correctly yellow, but the preloader doesn't appear, the browser's loading bar stops at half then the preloader appears again for a fraction of seconds and suddenly the site appears (tested on Firefox, IE, Opera, Chrome and Safari, same behaviour with all of them).It looks that the preloader is become part of the site and that there is an invisibile preloader.The setting in: Publish settings -> Flash -> Script Settings -> Library Path -> Default Linkageis set to "Merged into code"the same happen if I set "Runtime Shared Library" and "Custom Preloader Loop".
I added 2 URLs to my project using AS3, when I test the movie the URLs work, but when I open the swf in the browser it does not work.
Is it because I did not upload the project to the server? or there is something wrong with the code?
This is the I code I used for my URLs:
GamLink1_mc.addEventListener(MouseEvent.CLICK, URLC);GamLink2_mc.addEventListener(MouseEvent.CLICK, URLC);
GamLink1_mc.buttonMode = true;GamLink1_mc.useHandCursor = true;
[Code]....
For some reason the Flash Uninstaller won't do its job. It says 'Installing', then 'Quit' but doesn't do anything. I've got all the browsers shut down.
MacPro, OS 10.4.1
I have two buttons that add a movieclip to the stage, I tried to remove the movieclips everytime a button gets clicked with removeChild but it doesn't seem to work, looked all over for a solution, but I can't find it. Can somebody help me with this?Here's my code;
ActionScript Code:
nav.zwembaden.addEventListener(MouseEvent.MOUSE_DOWN, zwembaden_MOUSEDOWN);
function zwembaden_MOUSEDOWN(e:MouseEvent):void
[code].....
I use adobe flash cs3 and my project in AS2 I tried to but many fscommands script but it failed when I add fscommand("fullscreen", "true"); only ... it works well but when I add :
fscommand("fullscreen", "true");
fscommand("trapallkeys", "true");
it doesn't work the movie doesn't play full screen
I noticed that TimerEvent in html document has prolem with IE.My document turns at 12 frame/sec :
ActionScript Code:
var timer:Timer=new Timer(5,0);
timer.addEventListener(TimerEvent.TIMER,timing);
[code]....