But my proublem is that I have a flash presentation.The defalt for moving the slide screens back and forth are left and right arrows.It works fine when tested or even the .swf fileBut then the left and right buttons don't respond when I go to fullscreen.
View 5 Replies3 frames
on the 1st i have some XML code
in the 2nd i read the XML and send to the 3rd frame and play a FLV movie. when the FLV movie ends, if goes back to the 2nd frame to "know" what is the next movie and goes again to the 3rd frame.
When i export everything is OK, when i publish and use the Mac Projector it is ok. But if i use the Fullscreen Mode, when the movie end's the Movie doesnt go back to the 2nd frame...
The following problem occured when I tried to view my flash project in full screen mode: When I applied a glowfilter to an movie object it didn't show when I run it, so I tried to do this with actionscript. It worked when I watched my flashmovie as swf in normal screen mode. But when I wanted to watch it full screen, the glow-script didn't seem to work anymore?
The actionscript looks like this:
import flash.filters.GlowFilter;
color=0x21FF00;
alpha=20;
[Code].....
I prepared a footer for a website and have the following issue:There are two buttons on footer bar that interests us. One is fullscreen - clicked activates fscommand function. But fscommand works only when I debug my fla. Otherwise, nothing happens. There's an additional variable that shows if fullscreen is active - nothing happens.There's also a "coder" info. I wanted to use navigateToURL function for "mailto:..." adress, but nothing happens, even if if changed it to [URL] adress. Also debugger doesn't activate it.I tested it in browser, completely nothing happens. There's the code, works without any "addons":
[Code]...
my flash site has custom fullscreen mode button which works fine in all browsers but the IE.
my as3 code
Code:
//FULLSCREEN MODE
function goFullScreen():void
{
[Code]....
I decided to try to use setInterval for myanimation, which is just a mouse trail.However, I'm trying to get teh mouse trail to be a dynamic mask.In my previous swf this was achieved by using a holder mc with the animation inside and then using this as the mask. But this time I just canpt seem to hit on the right way to get it to work. The code I am using for the mouse trail is:
Code:
var i:Number = 0;
var myInt:Number;
var t:MovieClip;[code].....
in the function, but now the trail doesn't resize and the mask still doesn't work.
I have a button object that I need to scale to align with the variable width of an array of images.However, when I set the width in code, the button does not actually become that width. Tracing out the width gives me the correct value, but on screen.. it's off.
I've proved it to myself by scaling the same button object manually in the properties pane and visually comparing. Both of the buttons below have a width of 410.
Code:
navigatorDown_btn.width = 410;
navigatorDown_btn.x = (stage.stageWidth/2)-(navigatorDown_btn.width/2);
trace(navigatorDown_btn.width); // output: 410
I have a Flash movie to be displayed in fullscreen on a kiosk. Also, It needs to run in a browser window because I'm using JavaScript to reload the page for resetting the movie.
The problem is, it doesn't go fullscreen when I put the following line to the constructor:
stage.displayState = StageDisplayState.FULL_SCREEN;
But it works fine if I put the line to a button's click handler.
Note: It doesn't work if just call the handler function with a null parameter.
How can I make it fullscreen as soon as it opens?
10.1 Does not work with SisM760gx chipset. I know its an old chipset for this notebook. I cant get fullscreen when watching youtube movies or something else.. The pixels stays dead and with strange colours. I know I can uncheck the use hardware acceleration , but the quality of the video get a lot worser, so i dont think this is a solution. I reinstalled the flash 9 and i got the problem "solved".. Is there plans from adobe to work on this issue for older platforms?
View 4 RepliesI am writing a application who runs in a browser and want it to run in fullscreen, i have read that Textinput do not work in fullscreen, so my application decrease in quality
View 1 Repliesmy fullscreen script for fine in debuging, but when embedded in html it just flickers and nothing happens!
all 'allowFullScreen' parms is det to 'true' and it have never been a problem before, what could be wrong?
The project is a keyframe based presentation and I'm an actionscript novice. It is to run, full screen, as an executable off a CD ROM and there are 4 .flvs in the executable. Here is my code for the first frame which contains opening video, and it works fine (sadly a simple fscommand fullscreen from as2 won't work). Problem is, I get black screens & weirdness when I try to use stageDisplayState and fullScreenTakeOver's on the frames that contain the other 3 videos.
[CODE]...
After I make changes and publish file, the fullscreen feature does not work in any browser.
Full file can be found here. link
I am using CS4 to edit.
I'm making a presentation with as2 and when going to fullscreen my arrow keys don't work anymore? I have googlet this problem, but found nothing.
View 1 RepliesI have a problem with Flash Player 9. I have developed a flash application (projector) in Flash CS3 using AS2 . I can compile it into Flash 9 projector, but when I do that, it will not run FSCOMMAND("FULLSCREEN", true); anymore. I wonder why this is as such.
When I read through some help resources, somewhere it says that FSCOMMAND is not supported in FP9 because of some security reasons and it says that I should use External Interface API instead.
If I have to use External Interface whatever remember that I am working with flash projector (exe), not in a browser. I use "trapallkeys" to stop people from pressing ESC and CTRL-F to quit fullscreen mode. However, ESC and CTRL-F still work if I put "trapallkeys" above "fullscreen".
So the problem is, I only able to use either one, not both. This is really strange.
I could not make "showmenu", "false" to work either.
i have a problem in flex fullscreen mode... that is my input box doesnot work in fullscreen mode.I could'nt able to type anything. and no keydown events are working.
View 1 RepliesI'm creating a presentation in Flash that will be projected onto a large screen. I'm using fscommand("fullscreen", true) to make it fullscreen. Since I don't know in advance what type of playback monitor will be used, apparently there may be some issue with the monitor ratio not being 4:3 which would make it widescreen. I was told to make sure the animation etc extends beyond the Stage frame so that it accommodates widescreen but I'm not sure how to do this - I mean how do you know how far beyond the stage to extend things? Since I don't have access to the playback monitor I can't test on it and the presentation will eventually be put onto a CD ROM where viewers may have all types of monitors.
View 1 RepliesI have a swf that is pretty complicated, you can interact with the page and go to different keyframes and it stops and/or starts depending on buttons, but I want to put it in a fla or something so I can put other swfs next to it and build it up and put several of them together as one.
I don't care about making it too complicated, I just want one interactive swf to go to the next compiled swf when that movie ends, but when I try importing it or loading it it just runs straight through without stopping or paying any attention to the scripting.
I am trying to more between frames using the data returned from a node n_EventID in an xml, when the node returns "1408" I want to move to frame 1 but if it returns anything else I want to move to frame 2. The part where the code moves to frame 2 seems to work perfectly but I can't seem to move to frame 1 when "1408" is returned.
xmlResultFinish = new XML();
xmlResultFinish.ignoreWhite = true
xmlResultFinish.onLoad = loadXmlResultFinish;
[code]....
I'm having a problem, where random IE's are not able to display my .swf file. All the IE's are IE8 with the latest flash pluggins and all security's are set at Medium, however some IE's get just a grey box and other's get the full flash file. What's going on? It works fine in Safari and Firefox of course, but why so much difficulty with AS3 Flash9 in IE? here is a link to the site, and it's the big image changer at the bottom of the front page.
[URL]
Is it common for AS3 apps to not work in IE? Is there a way to make them work? I have a movie clip in my library linked to a custom class Main and I have nothing on stage. Just one frame. Everything is built inside that movie clip. I add that movie clip to stage through a document class and everything works perfectly in Firefox and Chrome but when I open it in IE, it's just a blank page.
View 6 Repliesi followed the instructions oh how to make a centered pop up window here :i'm using a mac..nd it works in Safari... but when i try to use explore to open it, the pop up window doesn't come up...why is that.......? did i do something wrong?here is my website:and please click on 'message' to see for yourself.
View 5 Repliesi followed the instructions oh how to make a centered pop up window here : [URL]
i'm using a mac... and it works in Safari... but when i try to use explore to open it, the pop up window doesn't come up..
here is my website: [URL] and please click on 'message' to see for yourself.
this is what i have on the maintimeline:[code]I have 4 moveiclips called: redhex, bluehex, greenhex, and yellowhex.what the above code should do is make a 15x15 grid of hexes (yes i wanted all 4 hex mc's overlapping each other at each space on the grid.).Before i added the lines to dupllicate the blue, green, and yellow hexes also... the redhex movieclip duplicated exactly as it should.But after adding the lines to duplicate the blue, green, and yellow hexes also, in the same locations... Nothing at all showed up when i tested the movie (not even the redhex's)
View 4 RepliesIn the actions of a movie clip,I want to use something like:
PHP Code:
if(Key.isDown(W)){
//do stuff
}
But,it does not take anything else than LEFT,RIGHT and some others.I even tried ASCII:
PHP Code:
if(Key.isDown(100))
{}
It doesn't work.Then how do we use keys like W,A,S,D?
I've made a rounded rectangle with a gradient fill and another rounded rectangle over it with a transparency to create kind of a glossy effect. Both objects are part of a symbol in the library of the FLA file. Then, I activated the checkbox to create a scale-9 grid, and the Export for Actionscript checkbox in order to add this symbol from AS3. Next I made sure that every rounded corner was completely included in the slices on the edges of the grid. Well, no matter what, the object is scaled as a normal graph: the rounded corners appear bigger and deformed.
View 4 Repliesthis is what i have on the maintimeline:
Code:
initialize();
function initialize() {
for (i=1, r=0; r<15; r++, i++) {
for (c=0; c<8; c++) {
[code]...
I have 4 moveiclips called: redhex, bluehex, greenhex, and yellowhex.what the above code should do is make a 15x15 grid of hexes (yes i wanted all 4 hex mc's overlapping each other at each space on the grid.).Before i added the lines to dupllicate the blue, green, and yellow hexes also... the redhex movieclip duplicated exactly as it should.But after adding the lines to duplicate the blue, green, and yellow hexes also, in the same locations... Nothing at all showed up when i tested the movie (not even the redhex's)
I'm in a big distress, I'm using AS2 with CS3 (Flash 9.0 on OSX Snow Leopard) and I can't get the querystring. I don't understand it has always worked before with my previous version of Flash. I'm using this AS code: t_txt.text += _root.age; I have a dynamic text linked to t_txt. For the HTML I simply published using Flash, then I changed in the html file like this:
<param name="movie" value="age.swf?age=56" />
And
<embed src="age.swf?age=56" quality="high" etc >
When I set to use AS1 it just works fine. But I can't use AS1 all my projects are with AS2. So what's wrong?
flash cs5 wont follow s3's redirects, instead it makes an ioerror with http status code 303 which is not an error code, its a redirect code. It doesn't hit the redirect page at all. If i was to save this file as a cs4 doc and run it in cs5, same issue. If if was to open and run it in cs4, it works fine, no error, redirect gets hit.Exactly the same file works in cs4 but not in cs5.
View 1 Replieson my website I have a contact form where you should be able to type into an input text box. For some reason, my website won't allow me to click and edit the input text box. Could the problem be that it is within a movieclip?
View 21 Replies