i have the following code which works. Its for two buttons either side of a movie clip (holder_mc) which holds the images. The images load but their top left corner go to the 0,0 position of the movie clip (top left). My images are all different sizes and i want them all to be centred. I have looked at alot of threads and cant figure it out.
View 2 Replies
i am trying to center the image once clicked, i have multiple images(4) and want them to open dead center on the stage i would also like to close the opened image when the next one opens and return it to original position!
what i have got so far:-
stop();port1_mc.doubleClickEnabled=true;
var centerX:uint = stage.stageWidth / 2;var centerY:uint = stage.stageHeight / 2;
port1_mc.addEventListener(MouseEvent.DOUBLE_CLICK, go);
function go(evt:MouseEvent):void{
//opens image to the stage gotoAndPlay (2);}
Im able to link to a movieclip inside a movieclipUnfortunately one of the movieclips now are a scrollbar and scroll. Now the actionscript isnt working?cal.onPress = function() {gotoAndPlay(2);message1.contentMain.message.total = unit1;
View 17 RepliesI have a flash movie clip and need to load an external image inside the clip that reference to an external URL.. like URL i did something with XML but the image persist on every clip because it loads from actionscript using the x and y cords.
View 2 RepliesIve found all sorts of answers but not the right answer. Im using the loader class to load images into a gallery. Im placing the image inside a movie clip. I want to resize the images as users will dynamically load them but width is not working. scaleY works and scaleX
[Code]...
I've made a slide show and I've been successful so far. However, I'd like to add some thumbnails right below the original image (original size).Here are some specifications of the thumbnails:Size: 50 x 50 px.The image sources of the thumbnails and the original image are the same.Therefore, I'd like to resize only the movie clips for the thumbnails because the actual image file dimensions won't be changed.I tried simply setting the width and height of the movie clip to 50 but it lost quality and you get jagged lines in the image. Does anyone know a good algorithm to resize an image inside a movie clip proportionally and without losing quality?Btw, I'm using an XML files to store the images so you have to include the Loaders and stuff, what I really need to know is how to resize images without losing quality.
View 3 RepliesHow do I center (on stage) a loaded image inside a createEmptyMovieClip ? I've read so many threads...can't seem to make it work. here's my script:
button1.onPress = function(){
_root.createEmptyMovieClip("imagecontainer", _root.imagecontainer.getNextHighestDepth());
_root.imagecontainer.loadMovie("image18.jpg");
}
I've tried to center everything on stage, I even tried to center it by the registration point.
I have a very simple problem but I can't find the very simple solution to it. I've create an animated menu with animated movie clips inside to work as buttons. All the main buttons work perfectely but I've got just on button with a sub-menu. On this sub-menu I've placed an invisible hitarea button in order to place some gotoAndStop action. The thing is, it seems to me like this submenu hitarea are underneath something else (even though is the seccond layers right about the actions layers). I've placed a simple trace action whenever the mouse rolls over this area but I get nothing... Am I doing something really wrong? I'm losing all my hair already.
View 2 RepliesI'm try to build a photo gallery using the flash components SlideShowPro and ThumbGrid. I have put ThumbGrid inside a movie clip called thumbs_mc that slides in and out when you mouse over it to show or hide the thumbs. That part is working, but I would like to have the stage and thumbs_mc resize to the browser width with ThumbGrid centered inside thumbs_mc.
Resize and scaling the stage and movie clips is not a problem, but I can't figure out how to keep ThumbGrid centered inside the containing movie clip. ThumbGrid is a fixed width component, and the only way I can get it to work is to have the mc the same width as the component. Here's the part of the AS that I'm using to control the positioning now:
Code:
thumbs_mc.x = (sw/2) - (thumbs_mc.my_tg.width/2);
thumbs_mc.y = sh-25;
I have in my root:
1 Movie Clip instancied as a "cursor" 1 Movie Clip instancied as a "Mc_Obstacles" with others 5 Movie Clipsand the 5 Movie Clips inside the "Mc_Obstacles" are instancied as "Obstacle" , all with the same instance...I want this: when the mc "cursor" hit one of mcs "obstacles" gotoandstop to frame X then i did in frame with actions in another layer:
cursor.onEnterFrame=function(){
this._x=this.x+10;
if(this.hitTest(Mc_Obstacles.Obstacle)){
gotoAndStop(4);
}
}
The question is, How do you apply a function to a movie clip inside a movie clip inside a movie clip. So there are three mc and I need to apply the function to the inner most one.
Here is what I have. The 'a' is in 'spin_4' wich needs to be in 'portal'.
ActionScript Code:
for(var i = 1; i<=12; i++){
this.spin_4['a_'+i].onEnterFrame = function(){
if(this.hitTest(_level0.man)){
[Code]....
i made a movie clip name floor, and inside it are movieclips called plan0, plan1, plan2, plan2, and so on.
so to make it easy, it put the movieclips inside the floor movieclip into an array, like this:
daFloor = new Array();
for(a=0; a<10; a++){
daFloor[a] = "plan"+a
}
[Code]....
both didn;t work. how to access the inside movieclips through array;
I'm loading an external image into an empty actionscript movie clip (holder1) using MovieClipLoader(); on frame one of my movie and is invisible. Then when the movie plays, there is an empty movie clip symbol (image1_mc) that is placed manually on the stage within another movie clip symbol (flash_mc), and is also on a bottom layer of a mask layer which is animated. Is it possible to place "holder1" inside of "image1_mc" so that I can treat it as if it were an embedded image? In other words, have the image in "holder1" inside of the manually placed movie clip symbol "image1_mc" so that I can use it like a regular symbol on the stage?
View 1 Repliesive got a slider menu which opens when clicked. however the buttons (also mc instanced) inside the slider mc wont work... here is the code:
[Code]....
the slider mc works however i cant seem to get the 'web_MC' to respond..
when i add my animation to library movie clip goes far from center, why is this happening and how can i fix it?
View 5 Replies(using actionscript 2.0) I have a mc titled 'mc_othersitterimage1' Within 'mc_othersitterimage1' I have one layer with a simple shape that measures 85px x 85px, and I have another layer that has this actionscript on it:
Code:
this.loadMovie(perfectsitterimageURL1);
this._width = 30;
this._height = 30;
('perfectsitterimageURL1' is a variable for an image url. All of the images are NOT the exact same size.) I'd like the image to load in the center of my 85x85 pixel square. I have the registration point in the center of 'mc_othersitterimage1', but it still doesn't seem to work
I am getting some overlap issues when I'm using the hitTestObject function to determine if I am over a particular target area. Is there anyway I can have the center of my movie clip determine if it's over the target area instead of using the whole clip? I am using:
mc.hitTestObject(targeItem);
It is the "mc" that i would like to use the center point instead of the whole movie clip.
How i can get a Movieclip centered on a 100% Stage?Stage.align = T; doesnt work :/
and this also not works :/
mc._x = (Stage.width/2)-(mc._width/2);
mc._y = (Stage.height/2)-(mc._height/2);
I have a movie clip of all counties in the state of Montana (allcnt_mc). Within allcnt_mc there are individual movie clips specific to each county with name equal to the county's name. When clicking on a county, I'd like to zoom to that county and center the stage on it. I've added event listeners to all counties through querying an xml table that has demographic info I am calling into dynamic text boxes. Here is the code I have thus far to load the xml and add the listeners to the county movie clips.
//load xml
var xmlLoader:URLLoader = new URLLoader();
var xmlData:XML = new XML();
xmlLoader.addEventListener(Event.COMPLETE, LoadXML);
[Code]....
how do I get a movie clip in the center of the stage, even if it moves to fullscreen
View 3 RepliesI have got a movie clip that is dynamically created with actionscript I then load an external swf into that movieclip. My problem is having it centered when I view it in my browser..How do place I center that dynamic created movie clip? I was trying this but it's not seeming to work.
Code:
var container:MovieClip = this.createEmptyMovieClip("container_mc", 0);
container._x =Stage.width/2;
container._y =Stage.height/2;
I'll start off by saying I'm using Flash 8, Actionscript 2.0, and exporting as FlashPlayer 6.I'm trying to do this long landscape with a movie clip labeled, "mainMovie", let's say it's approximately 3600 x 600, while the stage/document dimensions are 800 x 600 .I have script on it so that moving the cursor to the left or right edge of the stage, the entire movie clip shifts left or right and through the rest of the landscape, similar to the 360 vr tours you see for some real estate sites online.On the main stage, I have that movie clip called, "mainMovie". Inside "mainMovie", is another clip called, "singleStrip", and inside that clip, I have other smaller movie clips through the landscape which are labeled and consist of random stuff, like shapes and items and stuff.
Everything works fine. The extra step that I am attempting is that I want the user to be able to scroll through the clip, "click" on an item, and then that item zooms into the front center stage and plays a small animation about that item. These items that are found throughout the landscape are movie clips themselves with script on them to be recognized as buttons.My problem with that is even though the center of my stage would be x=400, y=300, since my mainMovie on the stage scrolls from left to right, when I put in code to tween the item to a center position, that position is only set to the inside of the movie clip and not the center of the stage. I need to center a movie clip within two other clips to the stage.An example of the path of any of those items would be sort of like,
[code]...
That didn't work. It shifted it to a different position, not being the center of the stage.At another point, I tried to fake it out, placing a movie clip of a red ball on the main timeline in the center of the stage, and changed my code to:
[code]...
This didn't work, either.I do have other code that affects the motion scroll of the mainMovie from left to right, but I don't think this is the problem, I could be wrong.
I have a movie clip container that contains 7 smaller movie clips, images converted to movie clips actually. This is a scrolling banner that can scroll left or right.
How do I start in the middle of this banner instead of the far left? That is, when the script first loads I want to be able to scroll left and right, not just right.
I'm just trying to find the right action scrip for instance on my button to control the movie clip it is within.I have currently tried..
on (press) {
mc_lexisnexis_main.gotoAndPlay(2);
}
[code].....
I am trying to place buttons inside a movie clip to control the timeline of the same movie clip. This does not seam to work like buttons on the main timeline. When I play the movie the cursor does not turn into a hand and the rolloever affects only sort of work. I have read about controling the movie clip with buttons on the main timeline, but I need one of the buttons to change halfway through the movieclip. I want to be able to jump to interior shots while in the exterior section and vice versa. It would seem that button would work the same way inside a movie clip as they do on the main timeline, but that does not appear to be the case. I am using CS3. Action scrip 2.0 is selected, but I could change it to 3.0 if it would make a difference.
View 6 RepliesWhat I am trying to do is set up a 4x5 grid of boxes. Inside each box is 1) an image 2) four arrow keys 3) a text field to enter the code corresponding to the image. The idea is that someone could enter product codes into each text field, and be able to save this information in an external xml file. If they wanted to change the order, but keep an image, they could just use the arrow keys to move the product around the grid.
Where I am running into problems is I can put the boxes up on the screen in a grid. I can give each box an instance name. But I haven't yet been able to discover a way to address a movie clip (say one of the arrow buttons) which is a child of the original movieclip place by my for loops. Ideally I am looking for a way find, target and change values:
[Code]....
im currently trying to target frame 2 and a movieclip on that frame This works. But now im trying to target a movieclip inside a movie clip.This code works when trying to target one movieclip.cal.onPress = function() {gotoAndPlay(2);message.total = unit1;}how can i edit that code to find another movieclip inside the movieclip message?
View 6 RepliesCan you pause a movie clip, let's say movie clip A, from inside a seperate movie clip, let's say movie clip B. B is not a parent of A.
Essentially, I have a background slideshow running that I want to stop when a menu item is clicked, and an external swf file is loaded. I attached a jpg which diagrams how the movie clips are organized within each other and what I want to pause from within which movie clip:
If this is not feasible, I'd love if anyone could reccomend a better way to structure the movieclips.
I�d be grateful if anyone can answer what should be a simple problem. I�m building a Flash program that has many movie clips (like they all do). At one stage I need to duplicate a specific movie clip and make it appear in another movie clip.
PS: The movie clip needs to be added by actionscript as it is made on the fly in the program, hence it cant be in the original .fla file � if that makes sense.
I want to put a button on a movie clip that is inside a movie clip. The button needs to access a "label" on the parent movie clip.
View 5 Replies
