I have a movie clip container that contains 7 smaller movie clips, images converted to movie clips actually. This is a scrolling banner that can scroll left or right.
How do I start in the middle of this banner instead of the far left? That is, when the script first loads I want to be able to scroll left and right, not just right.
So I am creating a photo gallery and in the process I have created a button that links to a movieclip and plays it to appear as a popup window of the larger picture.
on(release) {
attachMovie("gallery_mc", "window", 1);
window._x = 250;
window._y = 150;
}
I then included a close button that simply posts
on(release) {
this.removeMovieClip(window);
}
I am curious as how to make the movie clip popup centered in the screen as it is now popping up in the upper left hand side of the flash movie.
How do I insert a start button on the first frame of a movie clip that will then disappear after the movie starts playing?
View 2 RepliesI have a flash CS project. I have one stage and some frames. How can I start all project from beginning using AS3? Or start all stage's content from beginning?
View 1 RepliesIs it possible (in AS2 or AS3) to have a button that starts a video as well as an MC at the same time? The idea being that the video will play alongside a movieclip that contains animated quotes from the dialog of the video, so syncing would be critical to.
View 1 RepliesI have a interactive movie clip with buttons. The problem I have with my movie clip is that whilst the movie is playing and I click the forebtn, it stops the movie. Ideally I would like the movie clip to start playing straight away when I press the fore button.
[Code]..
I'm try to build a photo gallery using the flash components SlideShowPro and ThumbGrid. I have put ThumbGrid inside a movie clip called thumbs_mc that slides in and out when you mouse over it to show or hide the thumbs. That part is working, but I would like to have the stage and thumbs_mc resize to the browser width with ThumbGrid centered inside thumbs_mc.
Resize and scaling the stage and movie clips is not a problem, but I can't figure out how to keep ThumbGrid centered inside the containing movie clip. ThumbGrid is a fixed width component, and the only way I can get it to work is to have the mc the same width as the component. Here's the part of the AS that I'm using to control the positioning now:
Code:
thumbs_mc.x = (sw/2) - (thumbs_mc.my_tg.width/2);
thumbs_mc.y = sh-25;
when i add my animation to library movie clip goes far from center, why is this happening and how can i fix it?
View 5 Replies(using actionscript 2.0) I have a mc titled 'mc_othersitterimage1' Within 'mc_othersitterimage1' I have one layer with a simple shape that measures 85px x 85px, and I have another layer that has this actionscript on it:
Code:
this.loadMovie(perfectsitterimageURL1);
this._width = 30;
this._height = 30;
('perfectsitterimageURL1' is a variable for an image url. All of the images are NOT the exact same size.) I'd like the image to load in the center of my 85x85 pixel square. I have the registration point in the center of 'mc_othersitterimage1', but it still doesn't seem to work
I am getting some overlap issues when I'm using the hitTestObject function to determine if I am over a particular target area. Is there anyway I can have the center of my movie clip determine if it's over the target area instead of using the whole clip? I am using:
mc.hitTestObject(targeItem);
It is the "mc" that i would like to use the center point instead of the whole movie clip.
How i can get a Movieclip centered on a 100% Stage?Stage.align = T; doesnt work :/
and this also not works :/
mc._x = (Stage.width/2)-(mc._width/2);
mc._y = (Stage.height/2)-(mc._height/2);
i am trying to center the image once clicked, i have multiple images(4) and want them to open dead center on the stage i would also like to close the opened image when the next one opens and return it to original position!
what i have got so far:-
stop();port1_mc.doubleClickEnabled=true;
var centerX:uint = stage.stageWidth / 2;var centerY:uint = stage.stageHeight / 2;
port1_mc.addEventListener(MouseEvent.DOUBLE_CLICK, go);
function go(evt:MouseEvent):void{
//opens image to the stage gotoAndPlay (2);}
I have a movie clip of all counties in the state of Montana (allcnt_mc). Within allcnt_mc there are individual movie clips specific to each county with name equal to the county's name. When clicking on a county, I'd like to zoom to that county and center the stage on it. I've added event listeners to all counties through querying an xml table that has demographic info I am calling into dynamic text boxes. Here is the code I have thus far to load the xml and add the listeners to the county movie clips.
//load xml
var xmlLoader:URLLoader = new URLLoader();
var xmlData:XML = new XML();
xmlLoader.addEventListener(Event.COMPLETE, LoadXML);
[Code]....
how do I get a movie clip in the center of the stage, even if it moves to fullscreen
View 3 Repliesi have the following code which works. Its for two buttons either side of a movie clip (holder_mc) which holds the images. The images load but their top left corner go to the 0,0 position of the movie clip (top left). My images are all different sizes and i want them all to be centred. I have looked at alot of threads and cant figure it out.
View 2 RepliesI have got a movie clip that is dynamically created with actionscript I then load an external swf into that movieclip. My problem is having it centered when I view it in my browser..How do place I center that dynamic created movie clip? I was trying this but it's not seeming to work.
Code:
var container:MovieClip = this.createEmptyMovieClip("container_mc", 0);
container._x =Stage.width/2;
container._y =Stage.height/2;
I'll start off by saying I'm using Flash 8, Actionscript 2.0, and exporting as FlashPlayer 6.I'm trying to do this long landscape with a movie clip labeled, "mainMovie", let's say it's approximately 3600 x 600, while the stage/document dimensions are 800 x 600 .I have script on it so that moving the cursor to the left or right edge of the stage, the entire movie clip shifts left or right and through the rest of the landscape, similar to the 360 vr tours you see for some real estate sites online.On the main stage, I have that movie clip called, "mainMovie". Inside "mainMovie", is another clip called, "singleStrip", and inside that clip, I have other smaller movie clips through the landscape which are labeled and consist of random stuff, like shapes and items and stuff.
Everything works fine. The extra step that I am attempting is that I want the user to be able to scroll through the clip, "click" on an item, and then that item zooms into the front center stage and plays a small animation about that item. These items that are found throughout the landscape are movie clips themselves with script on them to be recognized as buttons.My problem with that is even though the center of my stage would be x=400, y=300, since my mainMovie on the stage scrolls from left to right, when I put in code to tween the item to a center position, that position is only set to the inside of the movie clip and not the center of the stage. I need to center a movie clip within two other clips to the stage.An example of the path of any of those items would be sort of like,
[code]...
That didn't work. It shifted it to a different position, not being the center of the stage.At another point, I tried to fake it out, placing a movie clip of a red ball on the main timeline in the center of the stage, and changed my code to:
[code]...
This didn't work, either.I do have other code that affects the motion scroll of the mainMovie from left to right, but I don't think this is the problem, I could be wrong.
I have created an empty movie clip in the root, I load dynamically some jpg to the empty movie clip, but now I want to center it and I can't I have this code, it centers the movie clip but on the registration point of 0,0 not in the middle of the movie clip so the movie clip will show up nice and centered.
ActionScript Code:
var stageL:Object = new Object ();
stageL.onResize = function () {
[code]....
Is there a way to move the center point (rotational point) of a movie clip using actionscript?
View 3 RepliesCreated a text move clip that I have added Motion Tween, It works when I Play. But when I test Movie clip it does not work. What is the action script code to have it start when the it is loded in test.SWF?
View 6 RepliesI am new to AS3 and am trying to work out how to stop a movie clip from playing on mouse click. At the moment I have created a movieclip which plays when the user clicks it, but I now want to be able to stop the movieclip if the user clicks on it again. At the moment I have the following code:
stop();bigTree_mc.addEventListener(MouseEvent.CLICK, onClickplayAnimation);
function onClickplayAnimation(event:MouseEvent):void { bigTree_mc.play(); }
The tree animation plays fine, but i want to be able to stop it if the user clicks it again.
I'm attempting to create a movie clip animation that plays a loop when you mouseover and when you mouse out off of the movie clip i want the loop to stop at that current frame and stay there until the next mouse over event which would then start playing the movieclip at "last" frame prior to the mouseout.
View 1 RepliesI have one movie clip that when clicked on moves to the left of the screen, after it gets there I want another and exteral swf to load. But I dont know how to get the external clip to load after the movie clip gets to the left side of the screen....Here is what I got so far..
square_mc.onRelease = function()
{ square_mc._x = 30;
square_mc._y = 180;
[code]....
when square_mc get to the Y position of 180, run the external clip.
i'm trying to write the code for a flash animation which uses different movie clips and buttons.all the movie clips are in the same layer but i've written code to make all but one invisible when the animation loads.
dance._visible = false;
harmonica._visible = false;
violin._visible = false;
i've then got buttons which are supposed to make the movie clips visible, but then disapear again after the clip has played.i want to be able to press one button to have one clip start playing, but then i want to be able to press another button which stops that movie clip and starts a new one playing.this is what i came up with but it doesn't work
on (press) {
violin.stop();
harmonica.stop();[code]....
this script is from one of the buttons which is supposed to start the movieclip harmonica and stop violin playing.i've got the same code for violin but the other way round.when i press a button it works fine and plays the clip which then disapears (leaving a default clip which plays all the time visible) but pressing buttons to interrupt the clip and play another one don't work properly. the movie clips don't stop and reset when they are interupted. they kind of pause instead. when i go to play a clip that has previously been interrupted it starts from where it has been paused and not from the beginning
I just followed this tutorial and I did get how it all worked.. and i got my movie clip flying arround the stage. Then when i tried to apply it to a little project i'm working on, i couldn't get it working. I have a movie clip called mc_main and when i click a button I want it to move - using easing - to a new position on the stage. In the first frame of my timeline i have put this AS:
[Code]....
My flash movie is 1440x900 but the area where all the important stuff happens in within 1024x768, i am trying to keep the middle in the center regardless of browers size or aspect ratio.
I can center the page but it doesn't work as i need it to. If the browers is small (1024x768) the swf is justified against the left edge, but not keeping the middle in the middle of the brower.
[URL] is an example of exactly what i am trying to achieve.
flash version: CS3 AS2 Im having trouble making the pages for a website im working on. I have a row of buttons, and I want each one to open its corrisponding page ie. contact_us_button to open contact_us movie clip. the thing is I want each page to transition in and out. so when I click contact us, the contact us movie clip fades in and stops. When I click about us, the contact us movie clip fades out and about us fades in.
Is the way to do this to make each page movie clip have a fade start and fade end, and have it stop before the fade end, and on another page click continue playing the current clip to get the fade out and then open the new page movie clip?
I am pretty new to ActionScript 3 and Flash. I don't want my movie clip to play unless the person's mouse curser is on the movie clip for more than a second. If the person just runs their curser over the movie clips really quickly, then it should do nothing. It must be more than a second. How do I code that?
[Code]...
Here is the action scrip that I created. Correct it if you can.
Process.visible = false;
Cycles.visible = false;
stop();
[Code]....
Scene1->MovieClip1->Image1(as a button)Scene1->MovieClip2->MovieClip3->MovieClip4->frame1Now I want to call frame1 from Img1 have a parent Scene1 common.How can I do this.I have tried
on(release){
_parent.MovieClip2.MovieClip3.MovieClip4.gotoAndPl ay("frame1");
}
[code].....