I have a flash CS project. I have one stage and some frames. How can I start all project from beginning using AS3? Or start all stage's content from beginning?
View 1 RepliesI am working on a tabular file that when you click on one of the tabs (there is 7) you view the content of that layer.
The code I am using works fine:
on (release) {
land._visible = true;
Tab1._visible = false;
[Code]....
but when you view the "land" layer, go back to another tab and go back to the "land" layer it doesn't reload and start at frame 1 but the last frame you were at.
I desperately need it to "reload" when you release on the action above and to GoToAndPlay frame 1 but whatever code I try it won't do it.
I created a movie clip which plays ok. But when it ends there is a slight jump, if you will, when it goes back to frame 1 to begin playing again. Does anyone know how to make the transition unnoticeable from the last frame of a movie clip to the first frame of a movie clip?
View 4 Repliesi am making a quiz. My problem is that once the user completes the quiz and wants to start again the quiz is already on the last question. How do i make it so that once the user clicks start again the questions and answers arrays start from the beginning, sort of reset themselves.
View 1 RepliesI have a motion tween that is 180 frames in length. When the tween ends on the last frame and returns to the first frame to replay there is a slight jump in the tween. Is there anyway to stop the tween from jumping from last frame to the first?
View 3 RepliesI have a movie clip container that contains 7 smaller movie clips, images converted to movie clips actually. This is a scrolling banner that can scroll left or right.
How do I start in the middle of this banner instead of the far left? That is, when the script first loads I want to be able to scroll left and right, not just right.
How do I insert a start button on the first frame of a movie clip that will then disappear after the movie starts playing?
View 2 RepliesIs it possible (in AS2 or AS3) to have a button that starts a video as well as an MC at the same time? The idea being that the video will play alongside a movieclip that contains animated quotes from the dialog of the video, so syncing would be critical to.
View 1 RepliesI have a interactive movie clip with buttons. The problem I have with my movie clip is that whilst the movie is playing and I click the forebtn, it stops the movie. Ideally I would like the movie clip to start playing straight away when I press the fore button.
[Code]..
I'm having some problems on some systems (seems to affect mostly 64-bit systems) where videos streamed from Flash Media Server 3.5 doesn't start from the beginning. I'm using NetStream.Buffer.Full to detect when the video starts. Usually this works ok, but sometimes the video doesn't skips a couple of seconds from the beginning even though the value of NetStream.time property is 0 when this happens.
View 6 RepliesI've used kirupa's 'Photo Gallery Using XML and Flash' tutorial & modified to make my gallery, you can view it here: ZedMedia.org by clicking on the photos section in the main page. what i want to do is, instead of reaching the end of all my photos and it stopping, i want it to go back to the beginning image & start all over again. i want the opposite to appen at the start. when the previous_btn is pressed i want it to go to the end of the gallery.
View 3 RepliesI have some (Eg. 10) Movie Clips on bottom of the Stage (aligned horizontally) with different sizes (different width & height). I want them to align vertically on middle of the stage with same gap (irrespective of their sizes) in between 2 Movie Clips. Is it possible using AS3 code?
View 3 RepliesCreated a text move clip that I have added Motion Tween, It works when I Play. But when I test Movie clip it does not work. What is the action script code to have it start when the it is loded in test.SWF?
View 6 RepliesI am new to AS3 and am trying to work out how to stop a movie clip from playing on mouse click. At the moment I have created a movieclip which plays when the user clicks it, but I now want to be able to stop the movieclip if the user clicks on it again. At the moment I have the following code:
stop();bigTree_mc.addEventListener(MouseEvent.CLICK, onClickplayAnimation);
function onClickplayAnimation(event:MouseEvent):void { bigTree_mc.play(); }
The tree animation plays fine, but i want to be able to stop it if the user clicks it again.
I'm attempting to create a movie clip animation that plays a loop when you mouseover and when you mouse out off of the movie clip i want the loop to stop at that current frame and stay there until the next mouse over event which would then start playing the movieclip at "last" frame prior to the mouseout.
View 1 RepliesI have one movie clip that when clicked on moves to the left of the screen, after it gets there I want another and exteral swf to load. But I dont know how to get the external clip to load after the movie clip gets to the left side of the screen....Here is what I got so far..
square_mc.onRelease = function()
{ square_mc._x = 30;
square_mc._y = 180;
[code]....
when square_mc get to the Y position of 180, run the external clip.
how to add a movie clip to the stage from the library but i'm strugling to do it when the I need to load a movie clip from the library when the name of the movie clip is held in a variable.
for(var i:Number = 0; i < 64; i++)
{
var blueIconS:blueIcon = new blueIcon();
addChild(blueIconS);
[Code]....
The above code works for adding the blueIcon but I have a variable in that loop which tells which icon to load.
sectorsMCs[jewelsIDs[i]]
The above will tell me what MC name to load but how do I load a MC from library by that variable value?
i'm trying to write the code for a flash animation which uses different movie clips and buttons.all the movie clips are in the same layer but i've written code to make all but one invisible when the animation loads.
dance._visible = false;
harmonica._visible = false;
violin._visible = false;
i've then got buttons which are supposed to make the movie clips visible, but then disapear again after the clip has played.i want to be able to press one button to have one clip start playing, but then i want to be able to press another button which stops that movie clip and starts a new one playing.this is what i came up with but it doesn't work
on (press) {
violin.stop();
harmonica.stop();[code]....
this script is from one of the buttons which is supposed to start the movieclip harmonica and stop violin playing.i've got the same code for violin but the other way round.when i press a button it works fine and plays the clip which then disapears (leaving a default clip which plays all the time visible) but pressing buttons to interrupt the clip and play another one don't work properly. the movie clips don't stop and reset when they are interupted. they kind of pause instead. when i go to play a clip that has previously been interrupted it starts from where it has been paused and not from the beginning
I just followed this tutorial and I did get how it all worked.. and i got my movie clip flying arround the stage. Then when i tried to apply it to a little project i'm working on, i couldn't get it working. I have a movie clip called mc_main and when i click a button I want it to move - using easing - to a new position on the stage. In the first frame of my timeline i have put this AS:
[Code]....
I'm creating a game, here is a screenshot: I'm trying to implement a scene system in an easy way (I'm a beginner). In this tutorial the author adds scenes as movie clip. So I tried making a movie clip with action script export name the same as my main .as file. When I add it to the scene manually, dragging and dropping from the library, it works. But when I try adding it from a new starting .as file, I get a #1009 error. Adding a test movie clip with the same code works.
[Code]....
I have a group of movie clips, each placed randomly on the stage. I want to be able to click one of the movie clips and move them around. They are stored in an array.
View 5 RepliesI want to load a random movie clip from the library to an empty clip on the stage called (bg_graphics). the clips in the library are called (green, blue, yellow).
View 5 RepliesI've been searching high and low for a tutorial for your Flash movie that will show you how to make the movie ask for the users name at the begining and then it'll disply the name later on in the movie.
View 2 RepliesI could code in movie clip by clicking on movie cilp on the stage but in As3 I could not do . Is this restricted to code on movie clip ?
View 7 RepliesI'm trying to reach a body of text which i turned into a movie clip which is on the main stage, and have it scroll up/down whenever it rolls over the designated hot spots. Here's what i have.
stage.addEventListener(MouseEvent.MOUSE_MOVE,down1,false,0,true);
function down1(e:MouseEvent):void {
if (mouseX>=0 && mouseX<=42 && mouseY>111.1 && mouseY<146.1) {
[code].....
I'm trying to get a video I've placed on stage in an FLV component to Loop to the beginning once it's finished playing. However, once it plays through it stops and doesn't loop round, although the trace statement I'm calling in the loopVideo function is appearing in the output window? Here's my code...
[Code]...
flash version: CS3 AS2 Im having trouble making the pages for a website im working on. I have a row of buttons, and I want each one to open its corrisponding page ie. contact_us_button to open contact_us movie clip. the thing is I want each page to transition in and out. so when I click contact us, the contact us movie clip fades in and stops. When I click about us, the contact us movie clip fades out and about us fades in.
Is the way to do this to make each page movie clip have a fade start and fade end, and have it stop before the fade end, and on another page click continue playing the current clip to get the fade out and then open the new page movie clip?
I am pretty new to ActionScript 3 and Flash. I don't want my movie clip to play unless the person's mouse curser is on the movie clip for more than a second. If the person just runs their curser over the movie clips really quickly, then it should do nothing. It must be more than a second. How do I code that?
[Code]...
Making a Comic book/Video game with Flash Action Script 2.0. Check out my blog ive uploaded a couple of demos on it.Anyways i want to make a movie clip appear on stage when the user finds a key. The movie clip would be used as a trigger to send the player into an other version of the second level where a door would now be unlockable (only if he has the key).I know how to make the hittest work its making the movie clip appear on stage with an action that is giving me problemes.
View 2 RepliesI'm having a little trouble with the following code. When a user clicks on a button, I would like to add the corresponding movie clip to the stage, and remove the previous movie clip. This code works, but I know I am adding all the movie clips onto the stage at once, which isn't what I want. I don't want the movie clips to tween onto the stage, I want them to just play.
var arrNavigation:Array = [{button:about_mcButton, page:about_mc},{button:n2_mcButton, page:services_mc},
{button:n3_mcButton, page:products_mc}]
for(var i=0;i<arrNavigation.length;i++){
[code].....