I've been searching high and low for a tutorial for your Flash movie that will show you how to make the movie ask for the users name at the begining and then it'll disply the name later on in the movie.
View 2 Replies
I created a movie clip which plays ok. But when it ends there is a slight jump, if you will, when it goes back to frame 1 to begin playing again. Does anyone know how to make the transition unnoticeable from the last frame of a movie clip to the first frame of a movie clip?
View 4 RepliesI have one line that is going down 500 pixels with the instance called 'vertical'. I also have a line set next to it with aplha = 0. When the vertical line going down reaches 300 pixels, I want the line which is set to 0 to set the alpha = 100. The code I am trying does not work.. Here is what I am putting in
onClipEvent (enterFrame) {
if (vertical._height = 300) {
this._alpha = 100}
}
Seems simple enough, but the line becomes 100% alpha from the very beginning of the movie. Do I have to do anything with _root or what?
Actionscript 2.0I have a play and stop button in a movie clip. The actual button works great but does not pause the movie and then resume playback where it left off. Instead the movie goes back to the very beginning and stop/starts there. I need the button to resume playback where the movie was stoppedlike a pause and resume button. The videos load exernally through an FLVPlayback component (myVideo).The code is on the main time line in Actions layer.Here's the code for the button:
_root.StopNGo_mc.onRelease = function() { if (_root.StopNGo_mc._currentFrame == 1) { _root.StopNGo_mc.gotoAndStop(2); _root.myVideo.stop(); } else { _root.StopNGo_mc.gotoAndStop(1); _root.myVideo.play(); }}
[code]......
I have a motion tween that is 180 frames in length. When the tween ends on the last frame and returns to the first frame to replay there is a slight jump in the tween. Is there anyway to stop the tween from jumping from last frame to the first?
View 3 RepliesI have a flash CS project. I have one stage and some frames. How can I start all project from beginning using AS3? Or start all stage's content from beginning?
View 1 RepliesI am working on a tabular file that when you click on one of the tabs (there is 7) you view the content of that layer.
The code I am using works fine:
on (release) {
land._visible = true;
Tab1._visible = false;
[Code]....
but when you view the "land" layer, go back to another tab and go back to the "land" layer it doesn't reload and start at frame 1 but the last frame you were at.
I desperately need it to "reload" when you release on the action above and to GoToAndPlay frame 1 but whatever code I try it won't do it.
Is there an SWF player with a slider control, play and Stop, total play time; so you can jump to different sections in an SWF movie without having to watch it from beginning to end?
View 1 RepliesI'm working on a Flash movie that includes a simple on/off audio player. At the end of the movie it loops back to the beginning and plays again. if the viewer hits the sound off button it will turn the sound off untill the movie loops and then the audio automatically starts again. The viewer would then have to hit play again and then stop to stop it. Is it possible to fix this? I think that I ned to put a piece of code at the beginning of the movie to check if the sound is off or not and then to continue to keep it off if needed?Here is the code for the sound player I am using...
var mySound:Sound = new Sound();
var myChannel:SoundChannel = new SoundChannel();
var lastPosition:Number = 0;
mySound.load(new URLRequest("GlidingOnAir.mp3"));
[code]....
i was wondering is there anyway i could track the content of what users click on, in my swfwhat i want to do is track infromation like a web stats but i want to track what people click on inside the movie say i have a carousel and i want to track what person/item has been clicked on in the carousel is this possible?
View 5 RepliesOn the stage, I have 10 draggable movie-clips and 10 targets. At the moment, I have it set in such a way that, each movie-clip matches a specific target. Is it possible that the end-users will place the movie-clips on any targets they want? If so, what could be the easiest method to use?My project is a little complicated but my goal is to give the user the freedom to place the movie-clips to any targets which will make them snap and also give them a conditional statement. My project contains one exact model of an answer but there are a lot of probabilities because the end-user are more likely to place them around the targets randomly.
View 0 Repliesi want to intertwine php, MySql and flash. so i can make a flash movie display text that is in the sql database and a php script to change the database, php > sql = i can do but sql > flash = i can't do..i want it so the sql data show's in a text box in the flash movie...
View 1 RepliesWe're making a viral video which is going to be distributed as FLV movie file free for download and redistribution.
I don't know much about flash yet but I can imagine FLV is just some sort of special flash application which can also include arbitrary code.
Is it possible to track how many times that movie file has been played by letting the FLV file perform a server-callback when playback begins?
I have to make a flash movie that would allow the user to control the framerate of the movie. Unfortunately I'm not that good with flash and I don't know how that could be done ..I thought about something like
"on(press){
movieclip.increaseframerate(*2);
}"
I have a site with a container clip which all other content loads into. When one movie loads, it has a button that I'd like to be able to click to go to another page in the site (ie. unload it's parent movie and load another swf into the same container clip.
How can I address the parent container clip and tell it to unload this movie and load another swf into it?
So I have a movie(movie 1) and i want to load it into my other movie(movie 2).But is it possible to make movie 1 controll movie 2.I know it might be other threads about this but i couldnt find any, if there are any other could you link me up.
View 2 Repliesiam tring to make a new project , i just wants to know how to make a movie clip ( constant speed ) follows anther movie clip <--- "which can be moved by the user "
<<<>>>> i believe that this idea is good , that i records the X and Y postion of the User's movie clip and just make the other movie clip points at this postion and move toward it ,
how to make the other Movie clip (( which is a car ! .. so it have acceleration , speed , steering , etc )) go to this position or let us say try to??
make a circle object movie clip call ball and make a rectangle object movie clip call mc and paste this coding.
[Code]...
can anyone explain about the movement about D? the D is talk about the distance if i go -X,way my ball go ++ to +x?
How can I make sure all the components, even those that are not going to be visible at the beginning, load right away when I start my application?I have an application with a ViewStack whose visible child is set via a sidebar menu. Say the ViewStack has two children, A and B. A is initially visible, whereas B is not. How can I make sure they both load at the beginning, so that when I change to B I don't have to wait for it to load?
View 1 RepliesI'm making a room escape game and I've run into a problem. When an item gets added to the inventory, I'd like the user to be able to click on the item to affect another object (e.g. clicking screwdriver hides screws and displays other image) however when I add the code to the item, if the item is clicked and it's nowhere near the object it affects, the image pops up and it looks really stupid.
So what I'd like to be able to do, possibly using if and else statements or whatever's easiest, is to only have the inventory item be clickable if the movie clip of the object is affects is visible on the stage.
How do I make my flash website detect if someone tries to view my website using an iphone? My need is to display a message for iphone users.
View 1 RepliesHow to make a DYNAMIC TEXT invinsible at the begining and toggle the view accordingly.The Important thing is - I need the text to be invinsible at the begining. The main thing behind my need is WHEN the user GO FORWARD and BACKWARD in the main timeline the visibility of the text box should be unchanged unless the user decide to change it's visibility by clicking "chk_tbtn1" button.
In the code below every time the user go backward in timeline, it makes the txt box invinsible.
_root.my_Dyn_Txt1._visible = false
this.chk_tbtn1.onRelease = function() {
_root.my_Dyn_Txt1._visible = !_root.my_Dyn_Txt1._visible;
};
I'm currently making an animation which will eventually exceed the 16,000 frame limit (don't ask haha), so, short of making two movies and having to just start up the next one, what is the code for loading a movie? I presume they need to be in the same directory? So basically all I want is on the last frame of the movie the code executes and the second movie file opens up and starts. I guess I'd want the current movie to close, too.
View 1 RepliesI Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
View 6 RepliesI'm wondering how to dispaly either an image or a frame from an swf when the movie is not playing.
View 3 RepliesI'm having troubles with this movie. [URL].. I'm trying to load a .swf in a mc called container, the movie loads but not correct.
When it's playing, you are only hearing a sound but you don't see the movie. On my harddisk it's working fine but on the Internet it isn't working.
I've put the files online for download, because i've tried everything but nothings seems to work.[URL]..
I'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?
View 5 Replieshow SoleilNoir.net changes the size of their dynamic images and or websites to suit the resolution of the end users computer?
View 12 RepliesI want so code to see if it plays 60 fps (that is my settings) in a movie that must have much power, also, I want to write out for example: it plays 45 fps/60 fps. Is there any way to do this?
View 2 RepliesI suppose this would be done in actionscripting. I have created a movie clip called 'text', which obviously displays all my text to be shown. Now what I want to do is when I click a link to a different page in my site, all I want to happen is for it to change the information on the 'text' movie. Do I need to make 5 different 'text' movies and just have each link load a the different movie or what?
View 1 Replies
