ActionScript 3.0 :: Possible That The End-users Will Place The Movie-clips On Any Targets They Want?
Nov 17, 2011
On the stage, I have 10 draggable movie-clips and 10 targets. At the moment, I have it set in such a way that, each movie-clip matches a specific target. Is it possible that the end-users will place the movie-clips on any targets they want? If so, what could be the easiest method to use?My project is a little complicated but my goal is to give the user the freedom to place the movie-clips to any targets which will make them snap and also give them a conditional statement. My project contains one exact model of an answer but there are a lot of probabilities because the end-user are more likely to place them around the targets randomly.
View 0 Replies
Similar Posts:
Jul 23, 2008
I am using Flash CS3 with AS2 and I have made a drag and drop. Everything works fine, but I don't know how to make my movie clips snap to their targets.[code]
View 3 Replies
May 10, 2011
When the the 1. , 2. and 3. lines have boxes dropped on them I want the movie clip to load. I haven't been able to achive this. but I found a temporary way around it by making the clip load once the "3." target is full. this works but isn't completly accurate, I need it to also check if the other targets are full before the clip loads. I'm thinking it's something like:
"if (demons_mc.hitTest("targetCircle3+targetCircle2+targetCircle1")){this ._parent.gotoAndPlay("join"); }"
View 5 Replies
Oct 6, 2009
[URL]
At step four, it says to
4- Inside another Movie Clip named "Limits" place "Pads" and "Wall". Pads' instance name should be "Pads" and Wall's instance named "Border". We put the Wall and Pads inside the same Movie Clip, to use it to know when the ball collided. And we couldn't put everything together because the ball behaves different if hits the Wall instead of the Pads.
How do I create this movie clip and put the other movie clips "inside it"? Also, if anyone can find out, where do I put this movie clip? Do i put it at the same spot as the wall?
View 7 Replies
Mar 31, 2010
I'm trying to position dynamically generated movie clips into rows and columns. Currently i've managed to position them side-by-side using the same ._y position. I would like to position them into a grid consisting of 25 columns and 16 rows, so mc 26 would sit beneath mc 1 etc...
View 9 Replies
Nov 10, 2009
I have movie clips loading in dynamically using an XML file, and the duplicate movie clip function. I need to be able to select one of those movie clips, drag it to a desired position and have it snap to place. As for right now, I'm using :
[Code]...
View 3 Replies
Nov 12, 2009
I have 35 movie clips named mcMyObject1, mcMyObject2, etc. to mcMyObject35Each time the playhead enters the frame this code sits on, I want all of these 35 movie clips to be placed on the stage in random orderI want each one of these 35 movie clips to land on one of these X coordinates: 57, 187, 317, 447, 577, 707, 837 and on one of these Y coordinates: 53, 183, 131, 443, 573. (It's a 7 x 5 grid)Movie size is 1024 x 768Here's my code, which doesn't work:
stop();
var myXArray=[57, 187, 317, 447, 577, 707, 837]; //cordordinates for x
var myYArray=[53, 183, 313, 443, 573, 573, 573]; //cordordinates for y
[code]......
View 8 Replies
Sep 24, 2010
I place a group of movie clips with random types (different shapes on a square) in a grid formation The code for placing the movie clips is this (this is in two for loops):
[Code]...
this goes up a single column in the grid and should remove the tiles from the stage depending on each type and it does this (sort of) until it tries to remove more than one of the same type. So if it finds and removes an lShapes it doesn't error until it tries to remove another lShapes and then it gives this error in the output: Error #2025: The supplied DisplayObject must be a child of the caller. So I am assuming that this means it thinks all lShapes have been removed and thinks I'm trying to remove something that doesn't exist but there are other lShapes on the stage. I am at a loss as to what to do about this.
View 1 Replies
Mar 24, 2004
I place the code in the timeline but I dont know where to place them to make the movie clips work?
* do i have to place them on the time line?
* Do the have to be named a certain Way ?
* Do they have to have some code ?
View 2 Replies
Apr 8, 2005
how can i duplicate a movie clip and then place it on a certain place on the stage
View 5 Replies
Sep 13, 2009
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
View 1 Replies
Jun 5, 2011
As most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code:
//Don't worry I have an OnEnterFrame function here;
//attachedObj= the character; figure= the MC name of the character;
attachedObj = attachMovie("figure", "figure"+1, 1);
[Code].....
View 2 Replies
Jul 15, 2009
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 Replies
Jan 4, 2009
I'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?
View 5 Replies
Jul 14, 2003
How would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
View 7 Replies
Sep 17, 2004
After the dublication of an movie clip,
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.
View 3 Replies
Feb 22, 2005
how do i make a button trigger a movie clip that targets specific coords? I'm building a map and when a button is click it goes to a defined point. right now it jumps to the coords, but i'd much rather it smoothly move instead. the other thing is that i would like it to move from whatever point it is currently at.
View 11 Replies
Sep 27, 2004
I've been searching high and low for a tutorial for your Flash movie that will show you how to make the movie ask for the users name at the begining and then it'll disply the name later on in the movie.
View 2 Replies
Jan 5, 2009
Does anyone know a good reliable way to get movie clips to point at other movie clips? I use MX 2004.
View 1 Replies
Aug 18, 2005
Here's what I'm trying to do (in example form): I have a movie clip called "dude". Dude is animated to walk around, then drop a cigar (all inside the movie clip). But the problem is, dude moves, so if you try and move dude as the cigar is dropping, the cigar moves with him. So what I want to do is create a new movie clip instance called "cigar" OUTSIDE of the movie clip dude right as he's dropping it, so that you can move him without moving the cigar. Get it? I've attached another helpful animation to explain.
What I have right now is, on the 13th frame of dude, a few lines of code that create and place an instance of cigar. In that frame I also have an invisible instance of cigar for me to duplicate. Inside of the cigar movie clip is the animation that makes it fall to the ground. I need to change that code so that the instance of cigar is created outside of the movie clip dude. Here's the code I have now (inside of dude, on frame 13):
[Code]...
View 2 Replies
May 8, 2003
I have a problem stopping multiple clips. I have created a presentation using flash and I have many movie clips which have sub movie clips inside of them. Ok lets look at one movie clip in detail. Inside one _root movie there are multiple sub movies; each with a different movieclip labels (each movie clip is named with unique labels ie. north, south, east, west, and What I need to do is be able to STOP all these sub movie clips with one stop, and in turn PLAY these same movie clip with a second action.
The only way I know how to stop all these sub movie clips is to target each and every one individually.
[Code]...
View 2 Replies
Jun 22, 2010
What I'm trying to do is have my Flash piece have custom elements set by an XML file. I'm using ColorTransform. I have a piece that's loaded as a separate movie clip, and I can't figure out how to get to the piece and apply the ColorTransform.
Here's one example of what I'm doing for a different element on the same mc.
[code]...
So, in this example, I'm setting header_mc to a color specified in the xml. In the case I'm having trouble with, I want to set a color to a movie clip on the timeline and not the main movie
View 5 Replies
Jun 1, 2009
I am setting up a flash game with seven toggle on/off buttons that all do the same thing.I know how to assign them all to be able to do the same function in the main timeline. What I can't figure out is how to get them all to also do the same function within each of their respective movie clips.
Here's the code:
Code: Select allstop();
DontDrive.addEventListener(MouseEvent.MOUSE_OVER, RO_DontDrive);
DontDrive.addEventListener(MouseEvent.MOUSE_OUT, ROut_DontDrive);
[code]....
View 5 Replies
Jul 19, 2006
I've been trying to reproduce an animation effect I've seen on the Armani website, but I'm stuck trying to duplicate an empty movie clip with image loaded into it. The duplicates exist and I can move them, but they are invisible. Since the duplicates reside on depths above the intitial clip I'm confused about why they are invisible. The duplicates are scripted to follow behind the initial clip - each offset by 30 pixels (though I don't have that working perfectly).
View 1 Replies
Mar 27, 2005
okay, i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect... my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) {
play();
}
View 5 Replies
Mar 27, 2005
i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect...
my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) {
play();
}
also if you want to see what the problem is, here's the website in it's infancy (700k)
View 5 Replies
Feb 12, 2009
I Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
View 6 Replies
Mar 8, 2007
i was wondering is there anyway i could track the content of what users click on, in my swfwhat i want to do is track infromation like a web stats but i want to track what people click on inside the movie say i have a carousel and i want to track what person/item has been clicked on in the carousel is this possible?
View 5 Replies
Dec 17, 2010
I have continually run into this so i guess i just don't understand some foundation to how AS3 works.
So, I have a movie clip in the library (ClipA) - it is linked to a class.
Inside Clip A there are 3 other Movie Clips (SubClip1, SubClip2, SubClip3).
When I place ClipA on the stage i want to adjust the frame that each of the SubClips are on.
BUT, when I try to set them to a frame in ClipA's class file i get an error like this:1061: Call to a possibly undefined method gotoAndStop through a reference with static type flash.display:DisplayObject.
[Code]...
View 3 Replies
Jul 30, 2009
i got 3 movie clips on my logo and im using scale up and scale down for each other on Mouse_OVER and Mouse_OUT.i would like to make scaled up logo to be on absolute top.[code]
View 6 Replies
